The influence of a small amount of Al and Ni nano-particles on the microstructure, kinetics and hardness of Sn–Ag–Cu solder on OSP-Cu pads

Shalaby, 2010, Effect of rapid solidification on mechanical properties of a lead free Sn-3.5Ag solder, J Alloys Compd, 505, 113, 10.1016/j.jallcom.2010.05.179 Gain, 2009, Effect of nano Ni additions on the structure and properties of Sn-9Zn and Sn-Zn-3Bi solders in Au/Ni/Cu ball grid array packages, Mater Sci Eng B, 162, 92, 10.1016/j.mseb.2009.03.010 Shen, 2008, Growth mechanism of bulk Ag3Sn intermetallic compounds in Sn–Ag solder during solidification, Intermetallics, 16, 1142, 10.1016/j.intermet.2008.06.016 Gain, 2010, Investigation of small Sn-3.5Ag-0.5Cu additions on the microstructure and properties of Sn-8Zn-3Bi solder on Au/Ni/Cu pads, J Alloys Compd, 489, 678, 10.1016/j.jallcom.2009.09.150 Liu, 2009, Effects of multiple reflows on interfacial reaction and shear strength of SnAgCu and SnPb solder joints with different PCB surface finishes, J Alloys Compd, 470, 188, 10.1016/j.jallcom.2008.02.102 Mayappan, 2010, Effect of Bi addition on the activation energy for the growth of Cu5Zn8 intermetallic in the Sn–Zn lead-free solder, Intermetallics, 18, 730, 10.1016/j.intermet.2009.11.016 Gain, 2009, Effect of small Sn-3.5Ag-0.5Cu additions on the structure and properties of Sn-9Zn solder in ball grid array packages, Microelectron Eng, 86, 2347, 10.1016/j.mee.2009.04.015 Wang, 2008, Interfacial reactions in Sn-(Cu)/Cu6Sn5/Ni couples at 210 °C, Intermetallics, 16, 531, 10.1016/j.intermet.2007.12.015 Kang, 2009, Control of interfacial reaction layers formed in Sn-3.5Ag-0.7Cu/electroless Ni–P solder joints, Scripta Mater, 60, 257, 10.1016/j.scriptamat.2008.10.017 Othman, 2012, Effects of current density on the formation and microstructure of Sn-9Zn, Sn-8Zn-3Bi and Sn-3Ag-0.5Cu solder joints, Intermetallics, 22, 1, 10.1016/j.intermet.2011.10.011 Wang, 2009, Effects of rare earth Ce on microstructures, solderability of Sn–Ag–Cu and Sn–Cu–Ni solders as well as mechanical properties of soldered joints, J Alloys Compd, 467, 219, 10.1016/j.jallcom.2007.12.033 Babaghorbani, 2009, Reinforcements at nanometer length scale and the electrical resistivity of lead-free solders, J Alloys Compd, 478, 458, 10.1016/j.jallcom.2008.11.074 Peng, 2007, Effect of thermal aging on the interfacial structure of SnAgCu solder joints on Cu, Microelectron Realib, 47, 2161, 10.1016/j.microrel.2006.12.006 Cheng, 2009, Interaction behavior between the additives and Sn in Sn-3.0Ag-0.5Cu-based alloys and the relevant joint solderability, J Alloys Compd, 472, 530, 10.1016/j.jallcom.2008.05.017 Yao, 2008, Effects of multiple reflows on intermetallic morphology and shear strength of SnAgCu-xNi composite solder joints on electrolytic Ni/Au metallized substrate, J Alloys Compd, 462, 73, 10.1016/j.jallcom.2007.08.041 Xia, 2008, Effect of aluminum concentration on the interfacial reactions of Sn-3.0Ag-xAl solders with copper and ENIG metallizations, J Electron Mater, 37, 1858, 10.1007/s11664-008-0548-7 Tsao, 2010, Effects of nano-TiO2 additions on thermal analysis, microstructure and tensile properties of Sn3.5Ag-0.25Cu solder, Mater Des, 31, 990, 10.1016/j.matdes.2009.08.008 Gain, 2009, Interfacial microstructure and shear strength of Ag nano particle doped Sn-9Zn solder in ball grid array packages, Microelectron Reliab, 49, 746, 10.1016/j.microrel.2009.05.004 Chuang, 2011, Effect of Ce addition on the microstructures and mechanical properties of Sn-58Bi solder joints, J Electron Mater, 40, 71, 10.1007/s11664-010-1385-z Shen, 2009, Effect of ZrO2 nanoparticles on the mechanical properties of Sn–Zn solder joints on Au/Ni/Cu pads, J Alloys Compd, 477, 552, 10.1016/j.jallcom.2008.10.140 Chuang, 2011, Strengthening mechanism of nano-Al2O3 particles reinforced Sn3.5Ag0.5Cu lead-free solder, J Mater Sci Mater Electron, 22, 1021, 10.1007/s10854-010-0253-1 Lin, 2010, Effects of Ce and Zn additions on the microstructure development and mechanical properties of Sn3.0Ag0.5Cu solder joints, J Alloys Compd, 500, 167, 10.1016/j.jallcom.2010.03.233 Yoon, 2005, IMC morphology, interfacial reaction and joint reliability of Pb-free Sn–Ag–Cu solder on electrolytic Ni BGA substrate, J Alloys Compd, 392, 247, 10.1016/j.jallcom.2004.09.045 Yoon, 2009, Wettability and interfacial reactions of Sn–Ag–Cu/Cu and Sn–Ag–Ni/Cu solder joints, J Alloys Compd, 486, 142, 10.1016/j.jallcom.2009.06.159 Gain, 2011, Microstructure, kinetic analysis and hardness of Sn-Ag-Cu-1wt% nano-ZrO2 composite solder on OSP-Cu pads, J Alloys Compd, 509, 3319, 10.1016/j.jallcom.2010.12.048 Yaowu, 2008, Creep property of composite solders reinforced by nano-sized particles, J Mater Sci Mater Electron, 19, 349, 10.1007/s10854-007-9327-0