The improvement of ecological characteristics of coatings from cured epoxy resins by hot water extraction
Tóm tắt
Amine curing agents pose serious health hazards and controlling their release is crucially important. Extraction of unbounded amine from cured epoxy polymers can improve the ecological characteristics of such products. Even 1 min exposure of cured epoxy resins to hot water reduces three- to ten-fold the residual amount of amine present in the epoxy polymer. Different temperatures and extraction times were tested, enabling the selection of the most optimal extraction conditions, which correspond to 5 min of heating in 100°C. This additional cost-effective extraction step is very easy to perform and leads to a significant reduction of unbounded curing agent, making cured epoxy resins much more eco-friendly products. The documented positive and linear trends of logarithms of viscosity and the amount of released amine suggest the selection from such curing agents and such epoxy resins that are characterized by lowest possible viscosities, which guarantees that there is only a low amount of unbounded amine that needs to be released from the polymer.
Tài liệu tham khảo
Muskopf, JW, McCollister, SB, “Epoxy resins.” In: Bohnet, M, Brinker, J, Comils, B (eds.) Ullmann’s Encyclopedia of Industrial Chemistry, pp. 155–244. Wiley, New York (2003)
Petrie, EM, Epoxy Adhesive Formulations. McGraw-Hill, New York (2006)
Wicks, Z, Jones, F, Pappas, S, Wicks, D, Organic Coatings. Science and Technology. Wiley, New York (2007)
Pereira, CMC, Nóvoa, P, Martins, M, Forero, S, Hepp, F, Pambaguian, L, “Characterization of Carbon Nanotube 3D-Structures Infused with Low Viscosity Epoxy Resin System.” Compos. Struct., 92 2252–2257 (2010)
Catalani, A, Bonicelli, MG, “Kinetics of the Curing Reaction of a Diglycidyl Ether of Bisphenol A with a Modified Polyamine.” Thermochim. Acta, 438 126–129 (2005)
Sangermano, M, Acostaortiz, R, Puenteurbina, B, Berlangaduarte, L, Garciavaldez, A, Guerrerosantos, R, “Synthesis of an Epoxy Functionalized Spiroorthocarbonate Used as Low Shrinkage Additive in Cationic UV Curing of an Epoxy Resin.” Eur. Polym. J., 44 1046–1052 (2006)
Sekulic, A, Curnier, A, “Experimentation on Adhesion of Epoxy.” Int. J. Adhes. Adhes., 30 89–104 (2010)
Moriyama, H, Sekiya, H, Mitsui, H, Nishijima, S, Okada, T, “Effect of Ground Insulation Contact on Stability of Epoxy-Impregnated Superconducting Solenoids.” Cryogenics, 35 825–827 (1995)
Cavalli, A, Malavolti, M, Morosini, A, Salvini, A, Togni, M, “Mechanical Performance of Full Scale Steel-Timber Epoxy Joints After Exposure to Extreme Environmental Conditions.” Int. J. Adhes. Adhes., 54 86–92 (2014)
Kagathara, VM, Parsania, PH, “Preparation and Evaluation of Mechano-Electrical Properties and Chemical Resistance of Epoxy Laminates of Halogenated Bisphenol-C Resins.” Polym. Test., 20 713–716 (2001)
Ji, WG, Hu, JM, Liu, L, Zhang, JQ, Cao, CN, “Improving the Corrosion Performance of Epoxy Coatings by Chemical Modification with Silane Monomers.” Surf. Coat. Technol., 201 4789–4795 (2007)
May, C, Epoxy resins: chemistry and technology. Marcel Dekker, New York (1988)
Patnaik, PA, Comprehensive Guide to the Hazardous Properties of Chemical Substances. Wiley, New York (2007)
Hughes, JS, Biddinger, GR, Mones, E, Environmental Toxicology and Risk Assessment. American Society for Testing and Materials, Philadelphia (1995)
Greim, H, Bury, D, Klimisch, HJ, Oeben-Negele, M, Ziegler-Skylakakis, K, “Toxicity of Aliphatic Amines: Structure Activity Relationship.” Chemosphere, 36 271–295 (1998)
Bourne, LB, Milner, FJM, Alberman, KB, “Health Problems of Epoxy Resins and Amine-curing Agents.” Brit. J. Indust. Med., 16 81–97 (1959)
Jolanki, R, Estlander, T, Kanerva, L, “182 Patients with Occupational Allergic Epoxy Contact Dermatitis over 22 Years.” Contact Dermat., 44 121–123 (2001)
Chu, CY, Ponten, A, Sun, CC, Jee, SH, “Concomitant Contact Allergy to the Resins, Reactive Diluents and Hardener of a Bisphenol A/F-Based Epoxy Resin in Subway Construction Workers.” Contact Dermat., 54 131–139 (2006)
Kanerva, L, Jolanki, R, Estlander, T, “Occupational Epoxy Dermatitis with Patch Test Reactions to Multiple Hardeners Including Tetraethylenepentamine.” Contact Dermat., 38 299–301 (1998)
Conde-Salazar, L, Valks, R, Acebes, CG, Bertó, J, “Occupational Allergic Contact Dermatitis from Antioxidant Amines in a Dental Technician.” Dermatitis, 15 197–200 (2004)
Bachanek, T, Samborski, D, Chalas, R, Wolanska, E, “Evaluation of Teeth Loss Among Workers in the Laminate and Composite Materials Department of Aircraft Factory.” Agric. Environ. Med., 12 325–329 (2005)
Dopico-Garcia, MS, Lopez-Vilarino, JM, Fernandez-Martinez, G, Gonzalez-Rodriguez, MV, “Liquid Chromatography Method to Determine Polyamines in Thermosetting Polymers.” Anal. Chim. Acta., 667 123–129 (2010)
Paseiro-Cerrato, R, Rodríguez-Bernaldo de Quirós, A, Sendón, R, Bustos, J, Santillana, MI, Cruz, JM, Paseiro-Losada, P, “Chromatographic Methods for the Determination of Polyfunctional Amines and Related Compounds Used as Monomers and Additives in Food Packaging Materials: A State-of-the-Art Review.” Compr. Rev. Food Sci. Food Saf., 9 676–694 (2010)
Prolongo, SG, Mikes, F, Cabanelas, JC, Paz-Abuin, S, Baselga, J, “Diffusion Control on the Cure Kinetics of DGEBA with Ethylenediamines.” J. Mater. Process. Technol., 143–144 546–550 (2003)
Escola, MA, Molina, CA, Nino Gómez, AC, Ybarra, GO, “The Determination of the Degree of Cure in Epoxy Paints by Infrared Spectroscopy.” Polym. Test., 24 572–575 (2005)
Jeliński, T, Cysewski, P, Makarewicz, E, “Application of Alizarin Colorimetric Measurements for Quantification of Amine Extraction by Model Food Simulants from Epoxy Polymer.” SpringerPlus, 2 593 (2013)
Ge, F, Jiang, L, Liu, D, Chen, C, “Interaction Between Alizarin and Human Serum Albumin by Fluorescence Spectroscopy.” Anal. Sci., 27 79–84 (2011)
Das, S, Bhattacharya, A, Mandal, PC, Rath, MC, Mukherjee, T, “One-Electron Reduction of 1, 2-Dihydroxy-9, 10-Anthraquinone and Some of Its Transition Metal Complexes in Aqueous Solution and in Aqueous Isopropanol–Acetone-Mixed Solvent: A Steady-State and Pulse Radiolysis Study.” Radiat. Phys. Chem., 65 93–100 (2002)
Preat, J, Laurent, A, Michaux, C, Perpete, E, Jacquemin, D, “Impact of Tautomers on the Absorption Spectra of Neutral and Anionic Alizarin and Quinizarin Dyes.” J. Mol. Struct., 910 24–30 (2010)
Cysewski, P, Jeliński, T, Przybyłek, M, Shyichuk, A, “Color Prediction from First Principle Quantum Chemistry Computations: A Case of Alizarin Dissolved in Methanol.” New J. Chem., 36 1836–1843 (2012)
Say-Liang-Fat, S, Cornard, JP, “Study on Chrysazin–Aluminium(III) Interaction in Solution by Spectroscopy and Quantum Chemical Calculations.” Polyhedron, 30 2326–2332 (2011)
Quinti, L, Allen, N, Edge, M, Murphy, B, Perotti, A, “A Study of the Luminescent Complexes Formed by the Dye 1,4-Dihydroxyanthraquinone (quinizarin) and Ga(III) and In(III).” J. Photochem. Photobiol. A, 155 93–106 (2003)
Savko, M, Kasackova, P, Gbur, P, Miskovsky, P, Ulicny, J, “Performance of Time Dependent Density Functional Theory on Excitations of Medium Sized Molecules—Test on Ionic Forms of Anthraquinone Dihydroxy Derivatives.” J. Mol. Struct., 823 78–86 (2007)
Łukaszczyk, J, Janicki, B, Kaczmarek, M, “Synthesis and Properties of Isosorbide Based Epoxy Resin.” Eur. Polym. J., 47 1601–1606 (2011)
Psarski, M, Celichowski, G, Marczak, J, Gumowski, K, Sobieraj, GB, “Superhydrophobic dual-sized filler epoxy composite coatings.” Surf. Coat. Technol., 225 66–74 (2013)
Dębska, B, Lichołai, L, “A Study of the Effect of Corrosive Solutions on Selected Physical Properties of Modified Epoxy Mortars.” Constr. Build. Mater., 65 604–611 (2014)