The fatigue behavior of (±55°)3 filament wound GRP pipes with a surface crack under internal pressure

Kaynak, 2001, Uniaxial fatigue behavior of filament-wound glass-fiber/epoxy composite tubes, Compos Sci Technol, 61, 1833, 10.1016/S0266-3538(01)00084-7

Rousseau, 1999, Influence of winding patterns on the damage behavior of filament-wound pipes, Compos Sci Technol, 59, 1439, 10.1016/S0266-3538(98)00184-5

Ferry, 1998, Interaction between plasticity and damage in the behavior of [+ϕ,−ϕ]n fiber reinforced composite pipes in biaxial loading, Compos Part B—Eng, 29, 715, 10.1016/S1359-8368(98)00030-4

Perreux, 1997, Study of the coupling between the phenomena of water absorption and damage in glass/epoxy composite pipes, Compos Sci Technol, 57, 1403, 10.1016/S0266-3538(97)00076-6

Joseph, 1994, Fatigue behavior of glass-fiber/epoxy-matrix filament-wound pipes, Compos Sci Technol, 52, 469, 10.1016/0266-3538(94)90029-9

Perreux, 1997, The effect of frequency on the fatigue performance of filament wound pipes under biaxial fatigue experimental results and damage model, Compos Sci Technol, 57, 353, 10.1016/S0266-3538(96)00155-8

Philippidis, 2001, Complex stress state effect on fatigue life of GRP laminates, Part I, J Fatigue, 24, 813, 10.1016/S0142-1123(02)00003-8

Shan, 2002, Environmental fatigue behavior and life prediction of unidirectional glass–carbon/epoxy hybrid composites, J Fatigue, 24, 847

Vanpaepegem, 2001, Fatigue degradation modeling of plane woven glass/epoxy composites, Compos Part A—Appl S, 32, 1433, 10.1016/S1359-835X(01)00042-2

Ellyin, 2001, Biaxial fatigue behavior of a multidirectional filament-wound glass-fiber/epoxy pipe, Compos Sci Technol, 61, 491, 10.1016/S0266-3538(00)00215-3

Martin, 1990, Characterization of Mode I and Mode II delamination growth and thresholds in composites, Compos Mater Test Des, 11, 251

Richard, 2000, A reliability method for optimization of ϕ fiber reinforced composite pipes, Reliab Eng Syst Saf, 68, 53, 10.1016/S0951-8320(00)00002-8

Tong, 2002, Characteristics of fatigue crack growth in GFRP laminates, Int J Fatigue, 24, 291, 10.1016/S0142-1123(01)00084-6

Devrajsinh, RA. Development of a new fatigue damage growth model for polymer matrix composites, Ph.D. Thesis, University of Wayne State, USA, 1997.

Tarakçıoğlu, 2001, Strength of filament wound GRP pipes with surface crack, Compos Part B—Eng, 32, 131, 10.1016/S1359-8368(00)00037-8

Tarakcioglu, 2005, Fatigue failure behavior of glass/epoxy ±55° filament wound pipes under internal pressure, Compos Sci Technol, 65, 703, 10.1016/j.compscitech.2004.10.002

Tarakcioglu N, Gemi L, Özcan M. Fatigue behavior of ±45° filament wound GRP pipes under internal pressure. In: Sixth international fracture conference, Turkey, 2003. p. 405–13.

Tarakcioglu N, Gemi L, Yapici A. Fatigue behavior of ±55° filament wound GRP pipes under internal pressure. In: Sixth international fracture conference, Turkey, 2003. p. 415–22.

Standard practice for obtaining hydrostatic or pressure design basis for “fiberglass” (glass-fiber-reinforced thermosetting resin) pipe and fittings. American Society for Testing Materials (ASTM) designation: D2992-91.