The effects of non-metallic inclusions on properties relevant to the performance of steel in structural and mechanical applications
Tóm tắt
Từ khóa
Tài liệu tham khảo
Costa e Silva, 2018, Non-metallic inclusions in steels – origin and control (review), J Mater Res Technol, 7, 283, 10.1016/j.jmrt.2018.04.003
Zhang, 2003, State of the art in evaluation and control of steel cleanliness, ISIJ Int, 43, 271, 10.2355/isijinternational.43.271
Kaushik, 2012, State of the art in control of inclusions their characterization, and future requirements, Metall Mater Trans B, 43, 710, 10.1007/s11663-012-9646-2
Atkinson, 2003, Characterization of inclusions in clean steels: a review including the statistics of extremes methods, Prog Mater Sci, 48, 457, 10.1016/S0079-6425(02)00014-2
Alexis, 2011
IISI, 2004
Kay, 1982, Inclusions engineering, CIM Bull, 75, 130
You, 2017, Modeling inclusion formation during solidification of steel: a review, Metals, 7, 460, 10.3390/met7110460
Gaye, 2003, Inclusion formation in steels
Kiessling, 1968
Kiessling, 1969, The influence of non-metallic inclusions on the properties of steel, J Met, 21, 47
Gove, 1974, The high-temperature hardness of various phases in steel, Met Technol, 1, 279, 10.1179/030716974803287834
Baker, 1976, Inclusion deformation and toughness anisotropy in hot-rolled steels, Met Technol, 3, 183, 10.1179/030716976803391656
Luo, 2001
Vodopivec, 1980, Relative plasticity of manganese sulphide inclusions during rolling of some industrial steels, Met Technol, 7, 186, 10.1179/030716980803287288
Yu, 2009, Behavior of inclusions with weak adhesion to strip matrix during rolling using FEM, J Mater Process Technol, 209, 4274, 10.1016/j.jmatprotec.2008.11.004
Ervasti, 2005, Void initiation close to a macro-inclusion during single pass reductions in the hot rolling of steel slabs: a numerical study, J Mater Process Technol, 170, 142, 10.1016/j.jmatprotec.2005.04.117
Luo, 2001, Deformation of inclusions during hot rolling of steels, J Mater Process Technol, 114, 87, 10.1016/S0924-0136(01)00576-3
Malkiewicz, 1963, Deformation of non-metallic inclusions during rolling of steel, J Iron Steel Inst, 201, 33
Robinson, 1979, Formation of alumina in steel and its dissemination during mechanical working, Met Technol, 6, 157, 10.1179/030716979803276769
Cicutti, 2001, Optimisation of calcium treatment to improve castability, 871
Zhang, 2018, Deformability of oxide inclusions in tire cord steels, Metall Mater Trans B, 49, 803, 10.1007/s11663-017-1134-2
Gupta, 2015, Structure–property linkages using a data science approach: application to a non-metallic inclusion/steel composite system, Acta Mater, 91, 239, 10.1016/j.actamat.2015.02.045
Sauveur, 1935
Bernard, 1981, Etude de la plasticite d’inclusions d’oxides, Rev Metall – CIT, 421, 10.1051/metal/198178050421
Matsuoka, 2014, Computer simulation of deformation behavior of non-metallic inclusion in hot-rolling, Procedia Eng, 81, 120, 10.1016/j.proeng.2014.09.137
Misaka, 1967, Formulation of mean resistance of deformation of plain carbon steel at elevated temperature, J Jpn Soc Technol Plast, 8, 414
Yamamoto, 2011, Behavior of non-metallic inclusions in steel during hot deformation and the effects of deformed inclusions on local ductility, ISIJ Int, 51, 1987, 10.2355/isijinternational.51.1987
Colpaert, 2018
Rocabois, 2001, Crystallization kinetics of Al2O3-CaO-SiO2 based oxide inclusions, J Non-Cryst Solids, 282, 98, 10.1016/S0022-3093(01)00332-5
Faraji, 2014, Effect of early stages of thermomechanical processing on inclusions in high carbon steel, Mater Sci Technol, 30, 1177, 10.1179/1743284713Y.0000000429
Brooksbank, 1972, Stress fields around inclusions and their relation to mechanical properties, J Iron Steel Inst, 246
Ånmark, 2015, The effect of different non-metallic inclusions on the machinability of steels, Materials, 8, 751, 10.3390/ma8020751
ASTM, 2003
Pardoen, 2010, Multiscale modeling of ductile failure in metallic alloys, C R Phys, 11, 326, 10.1016/j.crhy.2010.07.012
Pineau, 2016, Failure of metals I: brittle and ductile fracture, Acta Mater, 107, 424, 10.1016/j.actamat.2015.12.034
Thomason, 1990, 219
O’Keeffe, 2015, Multiscale ductile fracture integrating tomographic characterization and 3-D simulation, Acta Mater, 82, 503, 10.1016/j.actamat.2014.09.016
Pickering, 1971
Le Roy, 1981, A model of ductile fracture based on the nucleation and growth of voids, Acta Metall, 29, 1509, 10.1016/0001-6160(81)90185-1
Poruks, 2006, Martensite–ferrite interface strength in a low-carbon bainitic steel, Scr Mater, 54, 41, 10.1016/j.scriptamat.2005.09.012
Gladman, 1999, Grain refinement of steel by oxidic second phase particles, Mater Sci Tecnol, 15, 1414, 10.1179/026708399101505400
Suito, 1996, Thermodynamics on control of inclusions composition in ultra-clean steels, ISIJ Int, 36, 528, 10.2355/isijinternational.36.528
Onoe, 1987, Shape control of inclusions for steel tire cord (development in ladle arc refining), Trans ISIJ, 27, B249
Batista, 2017, The effects of deoxidation practice on the quality of thin foil low-carbon steel, J Min Metall Sect B Metall, 53, 357
Kobayashi, 1983, Effect of non-metallic inclusion of flange cracking of drawn and ironed can from tinplate, Trans Iron Steel Inst Jpn, 23, 410, 10.2355/isijinternational1966.23.410
Kaushik, 2012, Inclusion characterisation for clean steelmaking and quality control, Ironmak Steelmak, 39, 284, 10.1179/1743281211Y.0000000069
Jacobi, 1994, Metallurgy and materials technology of high-purity steels, Stahl Eisen, 114, 45
Bandstra, 2004, Modeling void coalescence during ductile fracture of a steel, Mater Sci Eng – Struct Mater Prop Microstruct Process, 366, 269, 10.1016/j.msea.2003.08.018
Srivastava, 2014, Effect of inclusion density on ductile fracture toughness and roughness, J Mech Phys Solids, 63, 62, 10.1016/j.jmps.2013.10.003
Edelson, 1962, The effect of second phases on the mechanical properties of alloys, Trans ASM, 55, 230
Speich, 1982, Effect of volume fraction and shape of sulfide inclusions on through-thickness ductility and impact energy of high-strength 4340 plate steels, Metall Trans A, 13, 2239, 10.1007/BF02648395
Abyazi, 2016, Mechanical anisotropy in Ca-treated and ultra-low sulphur HSLA-100 steel, Mater Sci Technol, 32, 976, 10.1080/02670836.2015.1104022
Knott, 1973
Benzerga, 2010, Ductile fracture by void growth to coalescence, Adv Appl Mech, 44, 169, 10.1016/S0065-2156(10)44003-X
Savic, 2007, Tensile deformation and fracture of press hardened boron steel using digital image correlation. SAE paper 2007-01-0790
Bardelcik, 2018, A mechanical, microstructural, and damage study of various tailor hot stamped material conditions consisting of martensite, bainite, ferrite, and pearlite, Metall Mater Trans A, 49, 1102, 10.1007/s11661-018-4471-0
Kadkhodapour, 2011, Mechanisms of void formation during tensile testing in a commercial, dual-phase steel, Acta Mater, 59, 2575, 10.1016/j.actamat.2010.12.039
Avramovic-Cingara, 2009, Void nucleation and growth in dual-phase steel 600 during uniaxial tensile testing, Metall Mater Trans A, 40, 3117, 10.1007/s11661-009-0030-z
Samei, 2016, Influence of strain path on nucleation and growth of voids in dual phase steel sheets, Mater Des, 92, 1028, 10.1016/j.matdes.2015.12.103
Jamwal, 2013, Quantitative fractographic analysis of variability in the tensile ductility of a high strength dual-phase steel, Metallogr Microstruct Anal, 2, 30, 10.1007/s13632-012-0051-7
Chawla, 1987
Ashby, 1989, Flow characteristics of highly constrained metal wires, Acta Metall Mater, 37, 1847, 10.1016/0001-6160(89)90069-2
Turkalo, 1958, The effect of carbide dispersion on the strength of tempered martensite, Trans AIME, 212, 750
Spitzig, 1983, Effect of sulfides and sulfide morphology on anisotropy of tensile ductility and toughness of hot-rolled C-Mn steels, Metall Trans A, 14A, 471, 10.1007/BF02644224
Tanguy, 2005, Ductile to brittle transition of an A508 steel characterized by Charpy impact test. Part I. Experimental results, Eng Fracture Mech, 72, 49, 10.1016/j.engfracmech.2004.03.010
Luyckx, 1970, Sulfide shape control in high strength low alloy steels, Metall Trans, 1, 3341, 10.1007/BF03037861
Tivelius, 1977, The processing of z-steel in an ASEA-SKF ladle furnace
Bannenberg, 1995, Inclusion modification to prevent nozzle clogging, 457
Cramb, 2003, Nozzle clogging
Maloney, 2005, The effect of sulfide type on the fracture behavior of HY180 steel, Acta Mater, 53, 533, 10.1016/j.actamat.2004.09.041
Iorio, 2002, Effects of gettering sulfur as CrS or MnS on void generation behavior in ultra-high strength steel, Scr Mater, 46, 863, 10.1016/S1359-6462(02)00067-2
Xu, 1993, Void nucleation by inclusion debonding in a crystal matrix, Model Simul Mater Sci Eng, 1, 111, 10.1088/0965-0393/1/2/001
Thornton, 1971, The influence of nonmetallic inclusions on the mechanical properties of steel: a review, J Mater Sci, 6, 347, 10.1007/PL00020378
Cogne, 1986, Cleanness and fatigue life of bearing steels, 26
Monnot, 1988, Relationship of melting practice, inclusion type, and size with fatigue resistance of bearing steels, 149
Shur, 2005, Physical metallurgy aspects of rolling contact fatigue of rail steels, Wear, 258, 1165, 10.1016/j.wear.2004.03.027
Unigame, 2006, Evaluation procedures nonmetallic inclusions in steel for highly reliable bearings, J ASTM Int, 3, 1, 10.1520/JAI14030
Murakami, 1989, Quantitative-evaluation of effects of non-metallic inclusions on fatigue-strength of high-strength steels. 1. Basic fatigue mechanism and evaluation of correlation between the fatigue fracture-stress and the size and location of non-metallic inclusions, Int J Fatigue, 11, 291, 10.1016/0142-1123(89)90054-6
Murakami, 1994, Effects of defects, inclusions and inhomogeneities on fatigue strength, Int J Fatigue, 16, 163, 10.1016/0142-1123(94)90001-9
Murakami, 2013, Defect size dependence on threshold stress intensity for high-strength steel with internal hydrogen, Fatigue Fract Eng Mater Struct, 36, 836, 10.1111/ffe.12077
Murakami, 2002
Garwood, 1951
Bartosiaki, 2015, Assessment of inclusion analysis via manual and automated SEM and total oxygen content of steel, J Mater Res Technol, 4, 235, 10.1016/j.jmrt.2015.01.008
Murakami, 1998, What happens to the fatigue limit of bearing steel without nonmetallic inclusions? Fatigue strength of electron beam remelted super clean bearing steel, 87
Murakami, 1994, Instructions for a new method of inclusion rating and correlations with the fatigue limit, J Test Eval, 22, 318, 10.1520/JTE11840J
ASTM, 2004
Sakai, 2006, Crack initiation mechanism of bearing steel in very high cycle fatigue
Sakai, 2009, Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structural use, J Solid Mech Mater Eng, 3, 425, 10.1299/jmmp.3.425
Li, 2012, Effects of inclusions on very high cycle fatigue properties of high strength steels, Int Mater Rev, 57, 92, 10.1179/1743280411Y.0000000008
Shiwaku, 1985, 94–85, 3.32
Oshiro, 1989, Verbesserung der Dauerhaltbarkeit von Ventilfederdraht, Stahl Eisen, 10, 1011
Bertrand, 2003, Metallurgy of plastic inclusions to improve fatigue life of engineering steels, Ironmak Steelmak, 30, 165, 10.1179/030192303225001667
Pessard, 2012, A new approach to model the fatigue anisotropy due to non-metallic inclusions in forged steels, Int J Fatigue, 41, 168, 10.1016/j.ijfatigue.2012.01.005
Roiko, 2012, Anisotropic distribution of non-metallic inclusions in a forged steel roll and its influence on fatigue limit, Int J Fatigue, 41, 158, 10.1016/j.ijfatigue.2011.12.023
Pessard, 2011, Microstructural heterogeneities and fatigue anisotropy of forged steels, Mater Sci Eng A, 529, 289, 10.1016/j.msea.2011.09.031
Sada, 2016, Improvement of rolling bearing life by bonding of non-metallic inclusions with matrix (part 1), J Jpn Soc Tribol, 61, 264
Hashimoto, 2011, Effect of inclusion/matrix interface cavities on internal-fracture-type rolling contact fatigue life, Mater Des, 32, 4980, 10.1016/j.matdes.2011.06.056
Spriestersbach, 2014, Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime, Int J Fatigue, 64, 114, 10.1016/j.ijfatigue.2014.03.003
Fu, 2018, The relationship between 100Cr6 steelmaking, inclusion microstructure and rolling contact fatigue performance, Int J Fatigue, 10.1016/j.ijfatigue.2018.11.011
Vaara, 2017, Brief review on high-cycle fatigue with focus on non-metallic inclusions and forming, Raken Mek, 50, 146
Sarma, 2009, On the role of non-metallic inclusions in the nucleation of acicular ferrite in steels, ISIJ Int, 49, 1063, 10.2355/isijinternational.49.1063
Babu, 2004, The mechanism of acicular ferrite in weld deposits, Curr Opin Solid State Mater Sci, 8, 267, 10.1016/j.cossms.2004.10.001
Byun, 2003, Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel, Acta Mater, 51, 1593, 10.1016/S1359-6454(02)00560-8
Gregg, 1994, Titanium-rich mineral phases and the nucleation of bainite, Metall Mater Trans - Phys Metall Mater Sci, 25, 1603, 10.1007/BF02668526
Mizoguchi, 1996
Koseki, 2005, Overview Inclusion assisted microstructure control in C–Mn and low alloy steel welds, Mater Sci Technol, 21, 867, 10.1179/174328405X51703
Babu, 2002, Inclusion formation and microstructure evolution in low alloy steel welds, ISIJ Int, 42, 1344, 10.2355/isijinternational.42.1344
Killmore, 2008, Development of ultra-thin cast strip products by the Castrip® process, 13
Liu, 2007, Nucleation of acicular ferrite on sulfide inclusion during rapid solidification of low carbon steel, ISIJ Int, 47, 1781, 10.2355/isijinternational.47.1781
Loder, 2016, Acicular ferrite formation and its influencing factors – a review, J Mater Sci Res, 6, 24, 10.5539/jmsr.v6n1p24
Sugiyama, 2005, Development of in-situ microstructure observation technique in steels, Nippon Steel Tech Rep, 91, 13
Li, 2014, First-principles calculation of the interaction of Mn with ZrO2 and its effect on the formation of ferrite in high-strength low-alloy steels, Scr Mater, 75, 78, 10.1016/j.scriptamat.2013.11.028
Li, 2016, Effect of oxides on nucleation of ferrite: first principle modelling and experimental approach, Mater Sci Technol, 32, 88, 10.1179/1743284715Y.0000000102
Li, 2016, Effect of Zr-Ti combined deoxidation on the microstructure and mechanical properties of high-strength low-alloy steels, Mater Sci Eng A, 659, 179, 10.1016/j.msea.2016.02.035
Grong, 2006, Microstructure control of steels through dispersoid metallurgy using novel grain refining alloys, ISIJ Int, 46, 824, 10.2355/isijinternational.46.824
Merchant, 1949, Basic reasons for good machinability of free machining steels, Trans Am Soc Met, 41, 647
Ramalingam, 1980, Inclusion chemistry control for machinability enhancement in steels, Mater Sci Eng, 43, 101, 10.1016/0025-5416(80)90136-6
Oikawa, 1997, Effect of titanium addition on the formation and distribution of MnS inclusions in steel during solidification, ISIJ Int, 37, 332, 10.2355/isijinternational.37.332
Oikawa, 2002, A new Pb-free machinable ferritic stainless steel, ISIJ Int, 42, 806, 10.2355/isijinternational.42.806
Mercier, 2014
Klocke, 2011, Analysis of defect mechanisms in polishing of tool steels, Prod Eng, 5, 475, 10.1007/s11740-011-0301-6
Mesquita, 2010, Tool steel quality and surface finishing of plastic molds, Exacta, 8, 307
Miyoshi, 1976, Hydrogen-induced cracking of steels under wet hydrogen sulfide environment, J Eng Ind, 98, 1221, 10.1115/1.3439090
Nakai, 1980, Development of steel resistant to hydrogen induced cracking in wet hydrogen sulfide environment, Kawasaki Steel Tech Rep, 47
Tamehiro, 1985, Effect of accelerated cooling after controlled rolling on the hydrogen induced cracking resistance of line pipe steel, Trans Iron Steel Inst Jpn, 25, 982, 10.2355/isijinternational1966.25.982
Matsumyia, 1984, Mathematical analysis of segregations in continuously-cast slabs, Trans Iron Steel Inst Jpn, 24, 873, 10.2355/isijinternational1966.24.873
Matsumiya, 1992, Mathematical analyses of segregations and chemical compositional changes of nonmetallic inclusions during solidification of steels, Mater Trans JIM, 33, 783, 10.2320/matertrans1989.33.783
Kim, 2008, Effect of environmental and metallurgical factors on hydrogen induced cracking of HSLA steels, Corros Sci, 50, 3336, 10.1016/j.corsci.2008.09.030
Jin, 2010, Effect of non-metallic inclusions on hydrogen-induced cracking of API5L X100 steel, Int J Hydrog Energy, 35, 8014, 10.1016/j.ijhydene.2010.05.089
Huang, 2010, Effect of microstructure and inclusions on hydrogen induced cracking susceptibility and hydrogen trapping efficiency of X120 pipeline steel, Mater Sci Eng A, 527, 6997, 10.1016/j.msea.2010.07.022
Domizzi, 2001, Influence of sulphur content and inclusion distribution on the hydrogen induced blister cracking in pressure vessel and pipeline steels, Corros Sci, 43, 325, 10.1016/S0010-938X(00)00084-6
Kulesza, 2016, Hydrogen induced CRACKING of ASTM A516 pressure vessel plate steels and the apparent effect of microscopic banding
Dunne, 2016, Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering, Int J Hydrog Energy, 41, 12411, 10.1016/j.ijhydene.2016.04.114
Saleh, 2016, Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters, Int J Hydrog Energy, 41, 12424, 10.1016/j.ijhydene.2016.05.235
Paes, 2016, Subsea hydrogen induced stress cracking of low alloy steel fasteners (IBP1860_16)
Du, 2016, Effect of Zr–Ti deoxidisation on the hydrogen-induced cracking of X65 pipeline steels, Mater Sci Technol, 32, 728, 10.1080/02670836.2016.1157971
Ohaeri, 2018, Hydrogen related degradation in pipeline steel: a review, Int J Hydrog Energy, 43, 14584, 10.1016/j.ijhydene.2018.06.064
Murakami, 2000, On the mechanism of fatigue failure in the superlong life regime (N > 107 cycles). Part 1: influence of hydrogen trapped by inclusions, Fatigue Fract Eng Mater Struct, 23, 893, 10.1046/j.1460-2695.2000.00328.x
Wranglen, 1974, Pitting and sulphide inclusions in steel, Corros Sci, 14, 331, 10.1016/S0010-938X(74)80047-8
Meng, 2003, Stainless-steel corrosion and MnS inclusions: metallurgy (communication arising), Nature, 424, 389, 10.1038/424389b
Schmuki, 2005, The composition of the boundary region of MnS inclusions in stainless steel and its relevance in triggering pitting corrosion, Corros Sci, 47, 1239, 10.1016/j.corsci.2004.05.023
Williams, 2010, Composition changes around sulphide inclusions in stainless steels, and implications for the initiation of pitting corrosion, Corros Sci, 52, 3702, 10.1016/j.corsci.2010.07.021
Park, 2017, inclusions in stainless steels – a review, Steel Res Int, 88, 1700, 10.1002/srin.201700130
Liu, 2017, Pitting corrosion of steel induced by Al2O3 inclusions, Metals, 7, 347, 10.3390/met7090347
Ma, 2010, Anisotropic 3D growth of corrosion pits initiated at MnS inclusions for A537 steel during corrosion fatigue, Corros Sci, 52, 2867, 10.1016/j.corsci.2010.04.036
Jacobi, 2004, Methods for determination of oxide cleanness in steel
Jacobi, 2003, Improving oxide cleanness on basis of MIDAS method, Ironmak Steelmak, 30, 130, 10.1179/030192303225001702
Deng, 2017, Formation and evolution of macro inclusions in IF steels during continuous casting, Ironmak Steelmak, 44, 739, 10.1080/03019233.2017.1368958
Wang, 2018, Particle-induced damage in Fe–TiB2 high stiffness metal matrix composite steels, Mater Des, 160, 557, 10.1016/j.matdes.2018.09.033
Shehata, 1988, Measurement of spatial distribution of inclusions, 123
Li, 2016, Three-dimensional Observation of nonmetallic inclusion clusters in solid metal by X-ray micro-CT, ISIJ Int, 56, 1989, 10.2355/isijinternational.ISIJINT-2016-218
Bi, 2014