Nội dung được dịch bởi AI, chỉ mang tính chất tham khảo
Tác động của biến dạng do cuốn và kéo đơn trục lên cấu trúc cũng như các tính chất từ tính và cơ học của sắt Armco, thép 12X18H10T và vật liệu composite gồm thép 12X18H10T-sắt Armco-thép 12X18H10T
Tóm tắt
Nghiên cứu này xem xét tác động của biến dạng elasto-plastic do cuốn và kéo đơn trục đến cấu trúc cùng các tính chất từ tính và cơ học của sắt Armco, thép 12X18H10T, và vật liệu composite ba lớp gồm thép 12X18H10T-sắt Armco-thép 12X18H10T. Các đặc tính từ tính, biến đổi một cách độc đáo trong quá trình biến dạng elasto-plastic, do đó cho phép sử dụng chúng như là các tham số để ước lượng các tính chất cơ học và mức độ biến dạng do cuốn và kéo đơn trục trong các sản phẩm làm từ những vật liệu này.
Từ khóa
#biến dạng #elasto-plastic #cơ học #từ tính #sắt Armco #thép 12X18H10T #vật liệu compositeTài liệu tham khảo
Kobelev, A.G., Potapov, I.N., and Kuznetsov, E.V., Tekhnologiya sloistykh metallov (Technologies of Sandwiched Materials), Moscow: Metallurgiya, 1991.
Gladkovskii, S.V., Trunina, T.A., Kokovikhin, E.A., et al., Structure and Properties of a Composite from 12X18H10T and 20 Steel Obtained by Explosion Welding, Metalloved. Term. Obrab. Met., 2009, no. 9, pp. 34–39.
Khismatullin, E.R., Korolev, E.M., Livshits, V.I., et al., Sosudy i truboprovody vysokogo davleniya: Spravochnik (High-Pressure Vessels and Pipelines), Moscow: Mashinostroenie, 1990.
Stetsenko, P.N. and Novikova, L.M., The Effect of Elastic and Plastic Deformations on Magnetic Properties of 1X18H9T Austenite Steel, Vestn. Mosk. Univ., Ser. 3: Fiz., Astron., 1967, no. 1, pp. 65–68.
Gol’dshtein, M.I., Grachev, S.V., Veksler, Yu.G., Spetsial’nye stali: Uchebnik dlya vuzov. (Special Steels: Textbook for Institutes), Moscow: MISIS, 1999, ed. 2.
Filippov, M.A., Litvinov, V.S., and Nemirovskii, Yu.R., Stali s metastabil’nym austenitom (Steels with Metastable Austenite), Moscow: Metallurgiya, 1988.
Apaev, B.A., Fazovyi magnitnyi analiz splavov (Phase Magnetic Analysis of Alloys), Moscow: Metallurgiya, 1972.
Mikheev, M.N. and Gorkunov, E.S., Magnitnye metody strukturnogo analiza i ne-azrushayushchego kontrolya (Magnetic Methods of Structural Analysis and Nondestructuve Testing), Moscow: Nauka, 1993.
Vida, G.V., Gorkunov, E.S., and Shevnin, V.M., Magnitnyi kontrol’ mekhanicheskikh svoistv prokata (Magnetic Testing of Mechanical Properties of Rolled Stock), Yekaterinburg: Ural. Otd. Ross. Akad. Nauk, 2002.
Kolmogorov, V.L., Mekhanika obrabotki metallov davleniem. Uch-k dlya vuzov (Mechanics of Metal Processing by Pressure), Moscow: Metallurgiya, 1986.
Deryagin, A.I., Zavalishin, V.A., Sagaradze, V.V., et al., The Effect of Composition and Temperature on Redistribution of Alloying Elements in the process of Cold Deformation of Fe-Cr-Ni Alloys, Fiz. Met. Metalloved., 2008, vol. 160, no. 3, pp. 301–311.
Kondorskii, E.I., The Nature of High Coercive Force of Fine Ferromagnets and Theory of a Single-Domain Structure, Izv. Akad. Nauk SSSR, Ser. Fiz., 1952, vol. 16, no. 4, pp. 398–411.
Preobrazhenskii, A.A., Magnitnye materialy i elementy. Uchebnic k. dlya vuzov (Magnetic Materials and Elements. Manual for Higher School), Moscow: Vysshaya shkola, 1976.
Vonsovskii, S.V. and Shur, Ya.S., Ferromagnetizm (Ferromagnetism), Moscow, Leningrad: OGIZ, 1948, p. 816.
Dunaev, F.N., Magnetic Texture of Elastically Tensile Transformer Steel, Izv. Vyssh. Uchebn. Zaved., Ser. Fiz., 1962, no. 1, pp. 151–153.
Zaikova, V.A. and Shur, Ya.S., The Effect of Tension on Magnetic Properties and Magnetostriction Curves of Silicon Iron, Fiz. Met. Metalloved., 1966, vol. 51. no. 5, pp. 664–673.