The effect of thermal aging degradation of CFRP composite on its mechanical properties using destructive and non-destructive methods and the DIC system

Atas, 2015, An experimental investigation on the repeated impact response of glass/epoxy composites subjected to thermal ageing, Compos. B Eng., 75, 127, 10.1016/j.compositesb.2015.01.032 Sadowski, 2016, Protective thermal barrier coatings. Loadings therm. Barrier coatings jet engine turbine bl, 5 Golewski, 2018, A novel application of alumina fiber mats as TBC protection for CFRP/epoxy laminates –Laboratory tests and numerical modeling, J. Eur. Ceram. Soc., 38, 2920, 10.1016/j.jeurceramsoc.2018.01.008 Golewski, 2019, Description of thermal protection against heat transfer of carbon fiber reinforced plastics (CFRP) coated by stiffened ceramic mat (TBC), Compos. Struct., 229, 10.1016/j.compstruct.2019.111489 Golewski, 2020, Material characterization of PMC/TBC composite under high strain rates and elevated temperatures, Materials, 13, 167, 10.3390/ma13010167 Golewski, 2022, Technological and strength aspects of layers made of different powders laminated on a polymer matrix composite substrate, Molecules, 27, 10.3390/molecules27041168 Fan, 2015, Improved thermo-oxidative stability of three-dimensional and four-directional braided carbon fiber/epoxy hierarchical composites using graphene-reinforced gradient interface layer, Polym. Test., 44, 177, 10.1016/j.polymertesting.2015.04.010 Prabhu, 2007, Thermal degradation of epoxy resin reinforced with polypropylene fibers, J. Appl. Polym. Sci., 104, 500, 10.1002/app.25523 Vu, 2013, The effect of thermo-oxidation on matrix cracking of cross-ply [0/90] S composite laminates, Compos Part A Appl Sci Manuf, 44, 114, 10.1016/j.compositesa.2012.08.013 Rocha, 2017, Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades, Compos. Struct., 174, 110, 10.1016/j.compstruct.2017.04.028 Akay, 2008, Evaluation of thermal ageing of a carbon fibre reinforced bismalemide, Compos. Sci. Technol., 68, 3081, 10.1016/j.compscitech.2008.07.002 Tandon, 2011, Influence of laminate lay-up on oxidation and damage growth: isothermal aging, Compos Part A Appl Sci Manuf, 42, 1127, 10.1016/j.compositesa.2011.04.018 Sang, 2017, Thermo-oxidative ageing effect on mechanical properties and morphology of short fibre reinforced polyamide composites-comparison of carbon and glass fibres, RSC Adv., 7, 43334, 10.1039/C7RA07884F Marouani, 2012, Ageing of carbon/epoxy and carbon/vinylester composites used in the reinforcement and/or the repair of civil engineering structures, Compos. B Eng., 43, 2020, 10.1016/j.compositesb.2012.01.001 Golewski, 2018, An influence of UV ageing process on tensile strength and Young's modulus of polymeric fiber composite materials, IOP Conf. Ser. Mater. Sci. Eng., 416, 10.1088/1757-899X/416/1/012057 Golewski, 2021, The influence of aging in salt chamber on strength of aluminum – CFRP single lap joints, Mater. Today Proc., 45, 4264, 10.1016/j.matpr.2020.12.510 Alessi, 2014, Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites, Compos. B Eng., 67, 145, 10.1016/j.compositesb.2014.06.006 Vu, 2012, Experimental characterization of thermo-oxidation-induced shrinkage and damage in polymer-matrix composites, Compos Part A Appl Sci Manuf, 43, 577, 10.1016/j.compositesa.2011.12.018 Lafarie-Frenot, 2010, Thermo-oxidation behaviour of composite materials at high temperatures: a review of research activities carried out within the COMEDI program, Polym. Degrad. Stabil., 95, 965, 10.1016/j.polymdegradstab.2010.03.019 Upadhyaya, 2011, A mechanism-based multi-scale model for predicting thermo-oxidative degradation in high temperature polymer matrix composites, Compos. Sci. Technol., 71, 1309, 10.1016/j.compscitech.2011.04.018 Xue, 2019, The influence of thermo-oxidative aging on the electromagnetic absorbing properties of 3D quasi-isotropic braided carbon/glass bismaleimide composite, Polym. Degrad. Stabil., 168, 10.1016/j.polymdegradstab.2019.108941 Dey, 2012, Natural frequencies of delaminated composite rotating conical shells - a finite element approach, Finite Elem. Anal. Des., 56, 41, 10.1016/j.finel.2012.02.007 Mukhopadhyay, 2018, Effect of delamination on the stochastic natural frequencies of composite laminates, Compos. B Eng., 154, 242, 10.1016/j.compositesb.2018.07.029 Yang, 2004, Overall moduli and natural frequencies of composite laminates containing multiple interlaminar transverse cracks, Compos. Struct., 66, 223, 10.1016/j.compstruct.2004.04.041 Н, 2022, Математическое Изучение Краевой Трещины В Двух Разных Моделях При Возмущении Гармонической Волны, Механика Композитных Материалов, 58, 3, 10.22364/mkm.58.1.01 Karthik, 2022, Design and analysis of cantilever beam used Kevlar fiber composite for automobile applications, Mater. Today Proc., 59, 1817, 10.1016/j.matpr.2022.04.389 Ostachowicz, 1999, Natural frequencies of a multilayer composite plate with shape memory alloy wires, Finite Elem. Anal. Des., 32, 71, 10.1016/S0168-874X(98)00076-6 Rokni, 2012, 2D optimum distribution of carbon nanotubes to maximize fundamental natural frequency of polymer composite micro-beams, Compos. B Eng., 43, 779, 10.1016/j.compositesb.2011.07.012 Prasob, 2018, Static and dynamic behavior of jute/epoxy composites with ZnO and TiO2 fillers at different temperature conditions, Polym. Test., 69, 52, 10.1016/j.polymertesting.2018.04.040 Rokni, 2011, Maximum natural frequencies of polymer composite micro-beams by optimum distribution of carbon nanotubes, Mater. Des., 32, 3389, 10.1016/j.matdes.2011.02.008 Rajkumar, 2020, Comparison study of mechanical and dynamic vibration properties of hole defect introduced in hybrid polymer composite, Mater. Today Proc., 27, 677, 10.1016/j.matpr.2019.10.078 Pujar, 2020, Effect of stacking sequence and fiber orientation on natural frequency of hybrid composites - an FE approach, Mater. Today Proc., 24, 1585, 10.1016/j.matpr.2020.04.479 Singh, 2001, Natural frequencies of composite plates with random material properties using higher-order shear deformation theory, Int. J. Mech. Sci., 43, 2193, 10.1016/S0020-7403(01)00046-7 Kara, 2022, Stochastic prediction of natural frequencies of laminated composite beams by using a high-order statistical moment based approach, Compos. Struct., 290, 10.1016/j.compstruct.2022.115562 Almeida, 1999, Natural frequencies of composite plates with tailored thermal residual-stresses, Int. J. Solid Struct., 36, 3517, 10.1016/S0020-7683(98)00154-1 Peng, 2021, The effect of curing deformation on the vibration behavior of laminated composite beams, Compos. Struct., 277, 10.1016/j.compstruct.2021.114642 Yang, 2021, A novel virtual material layer model for predicting natural frequencies of composite bolted joints, Chin. J. Aeronaut., 34, 101, 10.1016/j.cja.2020.05.028 Alexander, 2016, Hygrothermal effect on natural frequency and damping characteristics of basalt/epoxy composites, Mater. Today Proc., 3, 1666, 10.1016/j.matpr.2016.04.057 Niu, 2022, Investigation of the performances for CFRP composites exposed to different aging environment at nano-scale, Polym. Test., 116, 10.1016/j.polymertesting.2022.107771 Marin, 2020, A generalization of the Saint-Venant’s principle for an elastic body with dipolar structure, Continuum Mech. Therm., 32, 269, 10.1007/s00161-019-00827-6 Golewski, 2017, Application of conjugate simulation for determination of temperature and stress distributions during curing process of pre-impregnated composite fibers, Arch. Metall. Mater., 62, 2295, 10.1515/amm-2017-0338