Tác động của góc tròn đến sự bôi trơn của ổ bi lăn trụ tốc độ cao khi xem xét hiện tượng trượt

Ai, X. (1993), “Numerical analyses of elastohydrodynamically lubricated line and point contacts with rough surfaces by using semi-system and multigrid methods (volumes 1 and 2)”, PHD Thesis, Northwestern University.

1979, A rheological model for elastohydrodynamic contacts based on primary laboratory data, Journal of Tribology, 101, 258

1990, Analysis of high-speed cylindrical roller bearings using a full elastohydrodynamic lubrication model part 1: formulation, Tribology Transactions, 33, 274, 10.1080/10402009008981956

2008, Stress and displacement distributions on cylindrical roller bearing rings using FEM, Mechanics Based Design of Structures & Machines, 36, 86, 10.1080/15397730701842537

1963, Theory of roller bearing lubrication and deformation

2007, Logarithmic profiles of rollers in roller bearings and optimization of the profiles, NTN Technical Review, 75, 140

2008, Experimental comparison between partially crowned and logarithmic roller profiles in cylindrical roller bearings, Transactions of the Japan Society of Mechanical Engineers, 74, 2308, 10.1299/kikaic.74.2308

1966, An analytical method to predict skidding in high speed roller bearings, ASLE Transactions, 9, 229, 10.1080/05698196608972139

1984, Fast numerical calculations of EHD sliding traction forces application to rolling bearings, Journal of Tribology, 107, 234

1985, New results of traction force calculations in elastohydrodynamic contacts, Journal of Tribology, 107, 241, 10.1115/1.3261033

2000, A full numerical solution to the mixed lubrication in point contacts, Journal of Tribology, 122, 1, 10.1115/1.555322

1981, Roller bearings under radial and eccentric loads, Tribology International, 14, 131, 10.1016/0301-679X(81)90058-X

2002, Studying contact stress fields caused by surface tractions with a discrete convolution and fast fourier transform algorithm, Journal of Tribology, 124, 36, 10.1115/1.1401017

1939, Elastic contact between two semi-infinite bodies, Forschung auf den Gebiete des Ingenieurwesen, 201

2007, Friction reduction in mixed lubrication, Tribology Letters, 28, 139, 10.1007/s11249-007-9258-1

2014, Effect of roller geometry on roller bearing load–life relation, Tribology Transactions, 57, 928, 10.1080/10402004.2014.927545

2000, Effect of roller profile on cylindrical roller bearing life prediction, Tribology Transactions, 44, 339

2016, Progressive mesh densification method for numerical solution of mixed elastohydrodynamic lubrication, ASME Journal of Tribology, 138

2014, A theoretical analysis of the mixed Elastohydrodynamic lubrication in elliptical contacts with an arbitrary entrainment angle, ASME Journal of Tribology, 136, 041505 1-11

1985, Contact Mechanics

1987, The Analysis Method of the Rolling Bearing, 74

2003, A comparative study of the methods for calculation of surface elastic deformation, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 217, 145, 10.1243/13506500360603570

2014, Fatigue life prediction of the radial roller bearing with the correction of roller generators, International Journal of Mechanical Sciences, 89, 299, 10.1016/j.ijmecsci.2014.09.015

2013, Elastohydrodynamic Lubrication (EHL), Encyclopedia of Tribology, 874

1989, An analysis and computational procedure for EHL film thickness, friction and flash temperature in line and point contacts, Tribology Transactions, 32, 364, 10.1080/10402008908981901

1999, The study of transition from full film elastohydrodynamic to mixed and boundary lubrication, Proceedings of the 1999 STLE/ASME HS Cheng Tribology Surveillance, The Advancing Frontier of Engineering Tribology, 150

2012, Mixed elastohydrodynamic lubrication in finite roller contacts involving realistic geometry and surface roughness, Journal of Tribology, 134, 011504, 10.1115/1.4005952