The effect of heat treatment on microstructure, microhardness, and pitting corrosion of Ti6Al4V produced by electron beam melting additive manufacturing process

AlMangour B, Yang JM (2017) Integration of heat treatment with shot peening of 17–4 stainless steel fabricated by direct metal laser sintering. JOM 69:2309–2313. https://doi.org/10.1007/s11837-017-2538-9 Harris ID (2017) Development and implementation of metals additive manufacturing. Additive Manufacturing Handbook pp 215–224 Srinivasan R, Nai MLS, Pan W, Wai Jack S, Tao L, Jun W (2018) Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations. Rapid Prototyp J 24:774–783. https://doi.org/10.1108/RPJ-05-2016-0070 Deirmina F, Peghini N, AlMangour B, Grzesiak D, Pellizzari M (2019) Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing. Mater Sci Eng A 753:109–121. https://doi.org/10.1016/j.msea.2019.03.027 Stéphane G, Christopher H, Mohamed G, Rajarshi B (2017) Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys. Sci Technol Adv Mater 18:584–610. https://doi.org/10.1080/14686996.2017.1361305 Shunyu L, Yung CS (2019) Additive manufacturing of Ti6Al4V alloy: A review. MATER DESIGN 164:107552. https://doi.org/10.1016/j.matdes.2018.107552 Kazantseva N, Krakhmalev P, Thuvander M, Yadroitsev I, Vinogradova N, Ezhov I (2018) Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing. Mater Charact 146:101–112. https://doi.org/10.1016/j.matchar.2018.09.042 Harrysson OLA, Cormier DR, Marcellin-Little DJ, Jajal KR (2006) Direct fabrication of custom orthopedic implants using electron beam melting technology. Int J Adv Manuf Technol 193–208. https://doi.org/10.26153/tsw/5604 Xipeng T, Yihong K, Shu Beng T, Chee Kai C (2014) Application of electron beam melting (EBM) in additive manufacturing of an impeller. Proc of the Int Conf on Prog in Addit Manuf 327-332. https://doi.org/10.3850/9789810904463_076 Pan W, Xipeng T, Nai MLS, Shu Beng T, Jun W (2016) Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component. MATER DESIGN 95:287–295. https://doi.org/10.1016/j.matdes.2016.01.093 Pan W, Mui LSN, Xipeng T, Guglielmo V, Srinivasan R, Wai JS, Shu BT, Qing XP, Jun W (2016) Recent progress of additive manufactured Ti-6Al-4V by electron beam melting. 26th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference 8–10, Austin, TX, USA Pan W, Mui LSN, Wai JS, Jun W (2015) Effect of building height on microstructure and mechanical properties of big-sized Ti-6Al-4V plate fabricated by electron beam melting. MATEC web of conferences EDP Sciences 30-02001. https://doi.org/10.1051/matecconf/20153002001 Antonysamy AA, Meyer J, Prangnell PB (2013) Effect of build geometry on the β-grain structure and texture in additive manufacture of Ti6Al4V by selective electron beam melting. Mater Charact 84:153–168. https://doi.org/10.1016/j.matchar.2013.07.012 Xipeng T, Yihong K, Yu Jun T, Marion D, Dominique M, Shu Beng T, Kah Fai L, Chee Kai C (2015) Graded microstructure and mechanical properties of additive manufactured Ti–6Al–4V via electron beam melting. Acta Mater 97:1–16. https://doi.org/10.1016/j.actamat.2015.06.036 Al-Bermani SS, Blackmore ML, Zhang W, Todd I (2010) The origin of microstructural diversity, texture, and mechanical properties in electron beam melted Ti–6Al–4V. Metall Mater Trans A Phys Metall Mater Sci 41:3422–3434. https://doi.org/10.1007/s11661-010-0397-x Facchini L, Emanuele M, Pierfrancesco R, Alberto M (2009) Microstructure and mechanical properties of Ti–6Al–4V produced by electron beam melting of pre-alloyed powders. Rapid Prototyp J 15(3):171–178. https://doi.org/10.1108/13552540910960262 Wei Quan T, Pan W, Xipeng T, Nai MLS, Erjia L, Shu Beng T (2016) Microstructure and wear properties of electron beam melted Ti-6Al-4V parts: a comparison study against as-cast form. Metals 6:284. https://doi.org/10.3390/met6110284 Murr LE, Esquivel EV, Quinones SA, Gaytan SM, Lopez MI, Martinez EY, Medina F, Hernandez DH, Martinez E, Martinez JL, Stafford SW (2009) Microstructures and mechanical properties of electron beam-rapid manufactured Ti–6Al–4V biomedical prototypes compared to wrought Ti–6Al–4V. Mater Charact 60:96–105. https://doi.org/10.1016/j.matchar.2008.07.006 Xiaoli Z, Shujun L, Man Z, Yandong L, Sercombe TB, Shaogang W, Yulin H, Rui Y, Murr LE (2016) Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting. MATER DESIGN 95:21–31. https://doi.org/10.1016/j.matdes.2015.12.135 Choi Y, Dong-Geun L (2019) Correlation between surface tension and fatigue properties of Ti-6Al-4V alloy fabricated by EBM additive manufacturing. APPL SURF SCI 481:741–746. https://doi.org/10.1016/j.apsusc.2019.03.0993 Galarraga H, Warren RJ, Lados DA, Dehoff RR, Kirka MM, Peeyush N (2017) Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM). Mater Sci Eng 685:417–428. https://doi.org/10.1016/j.msea.2017.01.019 Kiel-Jamrozik M, Jamrozik W, Witkowska I (2017) The heat treatment influence on the structure and mechanical properties of Ti6Al4V alloy manufactured by SLM technology. Conference on Innovations in Biomedical Engineering Springer 319-327. https://doi.org/10.1007/978-3-319-70063-2_34 Kang Y-J, Yang S, Young-Kyun Kim B, Almangour K-A (2019) Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy. Corros Sci 158:108082. https://doi.org/10.1016/j.corsci.2019.06.030 Yang J, Yang H, Hanchen Yu, Wang Z (2017) Corrosion behavior of additive manufactured Ti-6Al-4V alloy in NaCl solution. Metall Mater Trans A Phys Metall Mater Sci 48:3583–3593. https://doi.org/10.1007/s11661-017-4087-9 Nianwei D, Lai-Chang Z, Junxi Z, Xin Z, Qingzhao N, Yang C, Maoliang W, Chao Y (2016) Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes. Corros Sci 111:703–710. https://doi.org/10.1016/j.corsci.2016.06.009 Nianwei D, Lai-Chang Z, Junxi Z, Qimeng C, Maoliang W (2016) Corrosion behavior of selective laser melted Ti-6Al-4 V alloy in NaCl solution. Corros Sci 102:484–489. https://doi.org/10.1016/j.corsci.2015.10.041 Xiaojuan G, Yujie C, Daixiu W, Bin L, Ruiping L, Yan N, Yunping L (2017) Building direction dependence of corrosion resistance property of Ti–6Al–4V alloy fabricated by electron beam melting. Corros Sci 127:101–109. https://doi.org/10.1016/j.corsci.2017.08.008 Bai Y, Gai X, Li S, Zhang LC, Liu Y, Hao Y, Zhang X, Yang R, Gao Y (2017) Improved corrosion behaviour of electron beam melted Ti-6Al–4V alloy in phosphate buffered saline. Corros Sci 123:289–296. https://doi.org/10.1016/j.corsci.2017.05.003 Yangzi X, Yuan L, Sundberg KL, Jianyu L, Sisson RD (2017) Effect of annealing treatments on the microstructure, mechanical properties and corrosion behavior of direct metal laser sintered Ti-6Al-4V. J Mater Eng Perform 26:2572–2582. https://doi.org/10.1007/s11665-017-2710-y Abdeen DH, Palmer BR (2016) Corrosion evaluation of Ti-6Al-4V parts produced with electron beam melting machine. Rapid Prototyp J 22:322–329. https://doi.org/10.1108/RPJ-09-2014-0104 Xin G, Bai Y, Li Ji, Li S, Hou W, Yulin H, Xing Z, Rui Y, Misra RDK (2018) Electrochemical behaviour of passive film formed on the surface of Ti-6Al-4V alloys fabricated by electron beam melting. Corros Sci 145:80–89. https://doi.org/10.1016/j.corsci.2018.09.010 Kawalec Jill S, Brown SA, Payer JH, Merritt K (1995) Mixed-metal fretting corrosion of Ti6Al4V and wrought cobalt alloy. J Biomed Mater Res 29:867–873. https://doi.org/10.1002/jbm.820290712 Schmidt AM, Azambuja DS (2006) Electrochemical behavior of Ti and Ti6Al4V in aqueous solutions of citric acid containing halides. Mater Res 9:387–392. https://doi.org/10.1590/S1516-14392006000400008 Davide P, Brenna A, Diamanti MV, Beretta S, Bolzoni F, Ormellese M, Pedeferri MP (2017) Corrosion of titanium: Part 1: Aggressive environments and main forms of degradation. J Appl Biomater Funct Mater 15:291–302. https://doi.org/10.5301/2Fjabfm.5000387 Huo S, Meng X (1990) The states of bromide on titanium surface prior to pit initiation. Corros Sci 31:281–286. https://doi.org/10.1016/0010-938X(90)90120-T Xingchen Y, Shuo Y, Chaoyue C, Chunjie H, Rodolphe B, Rocco L, Min K, Wenyou M, Christian C, Hanlin L, Min L (2018) Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting. J Alloys Compd 764:1056–1071. https://doi.org/10.1016/j.jallcom.2018.06.076 Ghods S, Schultz E, Wisdom C, Schur R, Pahuja R, Montelione A, Arola D, Ramulu M (2020) Electron beam additive manufacturing of Ti6Al4V: Evolution of powder morphology and part microstructure with powder reuse. Materialia 9:100631. https://doi.org/10.1016/j.mtla.2020.100631 Jeong-Rim L, Min-Su L, Si Mo Y, Dongseok K, Tea-Sung J (2022) Influence of heat treatment and loading direction on compressive deformation behaviour of Ti–6Al–4V ELI fabricated by powder bed fusion additive manufacturing. Mater Sci Eng A 831:142258. https://doi.org/10.1016/j.msea.2021.142258 Kumar P, Ramamurty U (2019) Microstructural optimization through heat treatment for enhancing the fracture toughness and fatigue crack growth resistance of selective laser melted Ti6Al4V alloy. Acta Mater 169:45–59. https://doi.org/10.1016/j.actamat.2019.03.003 Alexander MR, Thompson GE, Zhou X, Beamson G, Fairley N (2002) Quantification of oxide film thickness at the surface of aluminium using XPS. Surf Interface Anal 34:485–489. https://doi.org/10.1002/sia.1344 Fuentes GG, Elizalde E, Yubero F, Sanz JM (2002) Electron inelastic mean free path for Ti, TiC, TiN and TiO2 as determined by quantitative reflection electron energy-loss spectroscopy. Surf Interface Anal 33:230–237. https://doi.org/10.1002/sia.1205 Gong X, Lydon J, Cooper K, Chou K (2013) Microstructural characterization and modeling of beam speed effects on Ti-6Al-4V by electron beam additive manufacturing. SFF 459–469. https://doi.org/10.26153/tsw/15699 Semiatin SL, Knisley SL, Fagin PN, Barker DR, Zhang F (2003) Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V. Metall and Mater Trans A 34:2377–2386. https://doi.org/10.1007/s11661-003-0300-0 Safdar A, Wei LY, Snis A, Lai Z (2012) Evaluation of microstructural development in electron beam melted Ti-6Al-4V. Mater Charact 65:8–15. https://doi.org/10.1016/j.matchar.2011.12.008 Kumar KN, Muneshwar P, Singh SK, Jha AK, Pant B, George KM (2015) Effect of grain boundary alpha on mechanical properties of Ti5. 4Al3Mo1V alloy. JOM 67:1265–1272. https://doi.org/10.1007/s11837-015-1443-3 Lütjering GERD (1998) Influence of processing on microstructure and mechanical properties of (α+ β) titanium alloys. Mater Sci Eng A 243:32–45. https://doi.org/10.1016/S0921-5093(97)00778-8 Ras MH, Pistorius PC (2002) Possible mechanisms for the improvement by vanadium of the pitting corrosion resistance of 18% chromium ferritic stainless steel. Corros Sci 44:2479–2490. https://doi.org/10.1016/S0010-938X(02)00050-1 Hendrik RM (2007) The use of vanadium to enhance localised corrosion resistance in 18% chromium ferritic stainless steel. University of Pretoria. https://hdl.handle.net/2263/26412 Bergamo T (2013) Effect of nitridation on high temperature corrosion of ferritic stainless steel. Chalmers University of Technology. https://hdl.handle.net/20.500.12380/175594