The effect of glenohumeral radial mismatch on different augmented total shoulder arthroplasty glenoid designs: a finite element analysis

Allred, 2016, Posterior augmented glenoid implants require less bone removal and generate lower stresses: a finite element analysis, J Shoulder Elbow Surg, 25, 823, 10.1016/j.jse.2015.10.003 Anglin, 2000, Mechanical testing of shoulder prostheses and recommendations for glenoid design, J Shoulder Elbow Surg, 9, 323, 10.1067/mse.2000.105451 Cheung, 2008, Revision shoulder arthroplasty for glenoid component loosening, J Shoulder Elbow Surg, 17, 371, 10.1016/j.jse.2007.09.003 Cil, 2010, Survivorship of the humeral component in shoulder arthroplasty, J Shoulder Elbow Surg, 19, 143, 10.1016/j.jse.2009.04.011 Denard, 2017, Finite element analysis of glenoid-sided lateralization in reverse shoulder arthroplasty, J Orthop Res, 35, 1548, 10.1002/jor.23394 Farron, 2006, Risks of loosening of a prosthetic glenoid implanted in retroversion, J Shoulder Elbow Surg, 5, 521, 10.1016/j.jse.2005.10.003 Hermida, 2014, Augmented wedge-shaped glenoid component for the correction of glenoid retroversion: a finite element analysis, J Shoulder Elbow Surg, 23, 347, 10.1016/j.jse.2013.06.008 Hopkins, 2005, Finite element models of total shoulder replacement: Application of boundary conditions, Comput Methods Biomech Biomed Engin, 8, 39, 10.1080/10255840500075205 Hopkins, 2004, The effects of glenoid component alignment variations on cement mantle stresses in total shoulder arthroplasty, J Shoulder Elbow Surg, 13, 668, 10.1016/j.jse.2004.04.008 Hopkins, 2007, Glenohumeral kinematics following total shoulder arthroplasty: a finite element investigation, J Orthop Res, 25, 108, 10.1002/jor.20290 Hopkins, 2006, Finite element modelling of glenohumeral kinematics following total shoulder arthroplasty, J Biomech, 39, 2476, 10.1016/j.jbiomech.2005.07.031 Iannotti, 2013, Liftoff resistance of augmented glenoid components during cyclic fatigue loading in the posterior-superior direction, J Shoulder Elbow Surg, 22, 1530, 10.1016/j.jse.2013.01.018 Knowles, 2015, Augmented glenoid component designs for type B2 erosions: A computational comparison by volume of bone removal and quality of remaining bone, J Shoulder Elbow Surg, 24, 1218, 10.1016/j.jse.2014.12.018 Knowles, 2015, Quantification of the position, orientation, and surface area of bone loss in type B2 glenoids, J Shoulder Elbow Surg, 24, 503, 10.1016/j.jse.2014.08.021 Lewis, 2016, Construct damage and loosening around glenoid implants: a longitudinal micro-CT study of five cadaver specimens, J Orthop Res, 34, 1053, 10.1002/jor.23119 Mansat, 2007, Evaluation of the glenoid implant survival using a biomechanical finite element analysis: influence of the implant design, bone properties, and loading location, J Shoulder Elbow Surg, 16, S79, 10.1016/j.jse.2005.11.010 Nowak, 2009, Simulation of surgical glenoid resurfacing using three-dimensional computed tomography of the arthritic glenohumeral joint: the amount of glenoid retroversion that can be corrected, J Shoulder Elbow Surg, 18, 680, 10.1016/j.jse.2009.03.019 Nyffeler, 2006, Effects of glenoid component version on humeral head displacement and joint reaction forces: an experimental study, J Shoulder Elbow Surg, 15, 625, 10.1016/j.jse.2005.09.016 Rice, 1988, On the dependence of the elasticity and strength of cancellous bone on apparent density, J Biomech, 21, 155, 10.1016/0021-9290(88)90008-5 Rice, 2008, Augmented glenoid component for bone deficiency in shoulder arthroplasty, Clin Orthop Relat Res, 466, 579, 10.1007/s11999-007-0104-4 Roche, 2013, Biomechanical impact of posterior glenoid wear on anatomic total shoulder arthroplasty, Bull Hosp Jt Dis, S5 Sabesan, 2014, Correction of acquired glenoid bone loss in osteoarthritis with a standard versus an augmented glenoid component, J Shoulder Elbow Surg, 23, 964, 10.1016/j.jse.2013.09.019 Sabesan, 2015, Glenohumeral mismatch affects micromotion of cemented glenoid components in total shoulder arthroplasty, J Shoulder Elbow Surg, 24, 814, 10.1016/j.jse.2014.10.004 Schwartz, 2015, Development of a computationally efficient full human body finite element model, Traffic Inj Prev, 16, 49, 10.1080/15389588.2015.1021418 Shapiro, 2007, Biomechanical effects of glenoid retroversion in total shoulder arthroplasty, J Shoulder Elbow Surg, 16, 90, 10.1016/j.jse.2006.07.010 Streit, 2015, Radiostereometric and radiographic analysis of glenoid component motion after total shoulder arthroplasty, Orthopedics, 38, e891, 10.3928/01477447-20151002-56 Suárez, 2012, Interface micromotions increase with less-conforming cementless glenoid components, J Shoulder Elbow Surg, 21, 474, 10.1016/j.jse.2011.03.008 Terrier, 2012, Importance of polyethylene thickness in total shoulder arthroplasty: a finite element analysis, Clin Biomech (Bristol, Avon), 10.1016/j.clinbiomech.2011.12.003 Terrier, 2006, Influence of glenohumeral conformity on glenoid stresses after total shoulder arthroplasty, J Shoulder Elbow Surg, 15, 515, 10.1016/j.jse.2005.09.021 Terrier, 2005, Bone-cement interface of the glenoid component: stress analysis for varying cement thickness, Clin Biomech (Bristol, Avon), 20, 710, 10.1016/j.clinbiomech.2005.03.010 Wirth, 1996, Complications of total shoulder-replacement arthroplasty, J Bone Joint Surg Am, 78, 603, 10.2106/00004623-199604000-00018 Yongpravat, 2013, Glenoid implant orientation and cement failure in total shoulder arthroplasty: a finite element analysis, J Shoulder Elbow Surg, 22, 940, 10.1016/j.jse.2012.09.007 Zhang, 2013, Glenoid articular conformity affects stress distributions in total shoulder arthroplasty, J Shoulder Elbow Surg, 22, 350, 10.1016/j.jse.2012.08.025 Zumstein, 2014, The glenohumeral joint—a mismatching system? A morphological analysis of the cartilaginous and osseous curvature of the humeral head and the glenoid cavity, J Orthop Surg Res, 9, 34, 10.1186/1749-799X-9-34