The effect of anode structure on the performance of NiO-BaZr0.1Ce0.7Y0.2O3-δ supported ceria-based solid oxide fuel cells

Iwahara H, Yajima T, Hibino T, Ozaki K, Suzuki H (1993) Protonic conduction in calcium, strontium and barium zirconates. Solid State Ionics 61:65–69 Shao Z, Haile SM (2004) A high-performance cathode for the next generation of solid-oxide fuel cells. Nature 431:170–173 Atkinson A, Barnett S, Gorte RJ, Irvine JTS, Mcevoy AJ, Mogensen M, Singhal SC, Vohs J (2004) Advanced anodes for high-temperature fuel cells. Nat Mater 3:17–27 Suzuki T, Hasan Z, Funahashi Y, Yamaguchi T, Fujishiro Y, Awano M (2009) Impact of anode microstructure on solid oxide fuel cells. Science 325:852–855 Yang L, Wang S, Blinn K, Liu M, Liu Z, Cheng Z, Liu M (2009) Enhanced sulfur and coking tolerance of a mixed ion conductor for SOFCs: BaZr0. 1Ce0. 7Y0. 2–xYbxO3–δ. Science 326:126–129 Dai H, Da'as EH, Shafi SP, Wang H, Bi L (2018) Tailoring cathode composite boosts the performance of proton-conducting SOFCs fabricated by a one-step co-firing method. J Eur Ceram Soc 38:2903–2908 Ren C, Gan Y, Lee M, Yang C, He F, Jiang Y, Dong G, Green RD, Xue X (2016) Fabrication and characterization of high performance intermediate temperature micro-tubular solid oxide fuel cells. J Electrochem Soc 163:F1115–F1123 Bi L, Fabbri E, Sun Z, Traversa E (2011) A novel ionic diffusion strategy to fabricate high-performance anode-supported solid oxidefuel cells (SOFCs) with proton-conducting Y-doped BaZrO3 films. Energy Environ Sci 4:409–412 Yang RJ, Lee MC, Chang JC, Lin TN, Chang YC, Kao WX, Lee LS, Cheng SW (2012) Fabrication and characterization of a Sm0.2Ce0.8O1.9 electrolyte film by the spin-coating method for a low-temperature anode-supported solid oxide fuel cells. J Power Sources 206:111–118 Eguchi K, Setoguchi T, Inoue T, Arai H (1992) Electrical properties of ceria-based oxides and their application to solid oxide fuel cells. Solid State Ionics 52:165–172 Doshi R, Richards VL, Carter JD, Wang X, Krumpelt M (1999) Development of solid-oxide fuel cells that operate at 500°C. J Electrochem Soc 146:1273–1278 Gong Z, Sun W, Shan D, Wu Y, Liu W (2016) Tuning the thickness of Ba-containing "functional" layer toward high-performance ceria-based solid oxide fuel cells. ACS Appl Mater Interfaces 8:10835–10840 Sun W, Liu W (2012) A novel ceria-based solid oxide fuel cell free from internal short circuit. J Power Sources 217:114–119 Wachsman ED, Lee KT (2011) Lowering the temperature of solid oxide fuel cells. Science 334:935–939 Atkinson A (1997) Chemically-induced stresses in gadolinium-doped ceria solid oxide fuel cell electrolytes. Solid State Ionics 95:249–258 Huang H, Lin J, Wang Y, Wang S, Xia C, Chen C (2015) Facile one-step forming of NiO and yttrium-stabilized zirconia composite anodes with straight open pores for planar solid oxide fuel cell using phase-inversion tape casting method. J Power Sources 274:1114–1117 Han Z, Wang Y, Yang Z, Han M (2016) Electrochemical properties of tubular sofc based on a porous ceramic support fabricated by phase-inversion method. J Mater Sci Technol 32:681–686 Sun H, Chen Y, Yan R, Wei T, Zhang Y, Zhang Q, Bu Y, Liu M (2016) Anode-supported solid oxide fuel cells based on Sm0.2Ce0.8O1.9 electrolyte fabricated by a phase-inversion and drop-coating process. Int J Hydrog Energy 41:10907–10913 Liu T, Wang Y, Zhang Y, Fang S, Lei L, Ren C, Chen F (2015) Steam electrolysis in a solid oxide electrolysis cell fabricated by the phase-inversion tape casting method. Electrochem Commun 61:106–109 Kingsbury BFK, Li K (2009) A morphological study of ceramic hollow fibre membranes. J Membr Sci 328:134–140 Sun W, Yan L, Shi Z, Zhu Z, Liu W (2010) Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3−δ electrolyte membrane. J Power Sources 195:4727–4730 Lin J, Miao G, Xia C, Chen C, Wang S, Zhan Z (2017) Optimization of anode structure for intermediate temperature solid oxide fuel cell via phase-inversion cotape casting. J Am Ceram Soc 100:3794–3800 Sun W, Shi Z, Liu M, Bi L, Liu W (2014) An easily sintered, chemically stable, barium zirconate-based proton conductor for high-performance proton-conducting solid oxide fuel cells. Adv Funct Mater 24:5695–5702 Ling Y, Chen J, Wang Z, Xia C, Peng R, Lu Y (2013) New ionic diffusion strategy to fabricate proton-conducting solid oxide fuel cells based on a stable La2Ce2O7 electrolyte. Int J Hydrog Energy 38:7430–7437 Van de Graaf JM, Kapteijn F, Moulijn JA (1998) Methodological and operational aspects of permeation measurements on silicalite-1 membranes. J Membr Sci 144:87–104 Liu T, Ren C, Zhang Y, Wang Y, Lei L, Chen F (2017) Solvent effects on the morphology and performance of the anode substrates for solid oxide fuel cells. J Power Sources 363:304–310 Taylor RP, McClain ST, Berry J (1999) Uncertainty analysis of metal-casting porosity measurements using Archimedes' principle. Int J Cast Met Res 11:247–257 Liu T, Ren C, Fang S, Wang Y, Chen F (2014) Microstructure tailoring of the nickel oxide–yttria-stabilized zirconia hollow fibers toward high-performance microtubular solid oxide fuel cells. ACS Appl Mater Interfaces 6:18853–18860 Zhang B, Wu K, Peng K (2018) Fabrication and characterization of Nd2-xInxCe2O7 proton-conducting electrolytes for intermediate-temperature solid oxide fuel cells. J Power Sources 399:157–165 Chen X, Lin J, Sun L, Liu T, Wu J, Sheng Z, Wang Y (2019) Improvement of output performance of solid oxide fuel cell by optimizing the active anode functional layer. Electrochim Acta 298:112–120 Bi L, Fabbri E, Traversa E (2012) Effect of anode functional layer on the performance of proton-conducting solid oxide fuel cells (SOFCs). Electrochem Commun 16:37–40 Singhal SC, Kendall K (2003) High-temperature solid oxide fuel cells: fundamentals, design and applications. Elsevier, Oxford, pp 149–168 Lee KT, Yoon HS, Ahn JS, Wachsman ED (2012) Bimodally integrated anode functional layer for lower temperature solid oxide fuel cells. J Mater Chem 22:17113–17120 Zhang X, Robertson M, Yick S, Deĉes-Petit C, Styles E, Qu W, Xie Y, Hui R, Roller J, Kesler O, Maric R, Ghosh D (2006) Sm0.5Sr0.5CoO3+Sm0.2Ce0.8O1.9 composite cathode for cermet supported thin Sm0.2Ce0.8O1.9 electrolyte SOFC operating below 600°C. J Power Sources 160:1211–1216 Sun W, Shi Z, Qian J, Wang Z, Liu W (2014) In-situ formed Ce0.8Sm0.2O2−δ@Ba(Ce, Zr)1−x(Sm, Y)xO3−δ core/shell electron-blocking layer towards Ce0.8Sm0.2O2−δ-based solid oxide fuel cells with high open circuit voltages. Nano Energy 8:305–311 Bi L, Da'as EH, Shafi SP (2017) Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte. Electrochem Commun 80:20–23 Bi L, Fabbri E, Traversa E (2018) Solid oxide fuel cells with proton-conducting La0. 99Ca0. 01NbO4 electrolyte. Electrochim Acta 260:748–754