The coolant penetration in grinding with a segmented wheel—Part 2: Quantitative analysis

Lavine, 1988, A simple model for convective heat transfer during the grinding process, Journal of Engineering for Industry, 110, 1, 10.1115/1.3187837 T. Nguyen, L.C. Zhang, The coolant penetration in grinding with segmented wheels—part 1: Mechanism and comparison with conventional wheels, International Journal of Machine Tools and Manufacture 45 (12–13) (2005) 1412–1420. L.C. Zhang, T. Nguyen, B. Oliver, A grinding wheel assembly and a method of grinding, Patent Application no. 20044901614, Australia. Nguyen, 2005, Modelling of the mist formation in a segmented grinding wheel system, International Journal of Machine Tools and Manufacture, 45, 21, 10.1016/j.ijmachtools.2004.06.019 Preziosi, 1988, The run-off condition for coating and rimming flows, Journal of Fluid Mechanics, 187, 99, 10.1017/S0022112088000357 Bayvel, 1993 Lefebvre, 1989 McCarthy, 1974, Review of stability of liquid jets and the influence of nozzle design, The Chemical Engineering Journal, 7, 1, 10.1016/0300-9467(74)80021-3 Greaves, 1997, Respiratory health of automobile workers exposed to metal working fluid aerosols: respiratory symptoms, American Journal of Industrial Medicine, 32, 450, 10.1002/(SICI)1097-0274(199711)32:5<450::AID-AJIM4>3.0.CO;2-W Fleck, 1992, Cold rolling of thin foil, Journal of Engineering Manufacture, IMechE, B206, 119, 10.1243/PIME_PROC_1992_206_064_02 Zhang, 1995, On the mechanism of cold rolling thin foil, International Journal of Machine Tools and Manufacture, 35, 363, 10.1016/0890-6955(94)E0028-H Zhang, 1993, Applied mechanics in grinding, Part III: a new formula for contact length prediction and a comparison of available models, International Journal of Machine Tools and Manufacture, 33, 587, 10.1016/0890-6955(93)90094-B Zhang, 1992, An overview of applied mechanics in grinding, Manufacturing Review, 5, 261 Zhang, 1993, Applied mechanics in grinding, Part II: modelling of elastic modulus of wheels and interface forces, International Journal of Machine Tools and Manufacture, 33, 245, 10.1016/0890-6955(93)90077-8 Sun, 2000, Material removal in the optical polishing of hydrophilic polymer, Journal of Materials Processing Technology, 103, 230, 10.1016/S0924-0136(00)00505-7 Yu., 1996 Gerhart, 1992 Sabersky, 1971 S. Matsumoto, Y. Takashima, Atomization characteristics of power law fluids by rotating disks, in: The 1st International Conference on Liquid Atomization and Spray Systems (ICLAS'78), Tokyo, Japan, 1978. Handbook on grinding, Norton Abrasives, Pty.htd, Australia 1992. Shaw, 1996 Malkin, 1989 National Occupational Health and Safety Commission, 1995 Y. Yue, J.W. Sutherland, W.W. Olson. Cutting fluid mist formation in machining via atomization mechanisms, in: Proceedings of the 1996 ASME International Mechanical Engineering Congress and Exposition, ASME, NY, USA, Atlanta, GA, USA, 1996. The American Society of Heating, Refrigeration and Air-Conditioning Engineering (ASHRAE). Standard 62-1999, “Ventilation for Acceptable Indoor Air Quality”. van de Sande, 1976, Jet breakup and air entrainment by low velocity turbulent jets, Chemical Engineering Science, 31, 219, 10.1016/0009-2509(76)85060-9 Grant, 1966, Newtonian jet stability, Journal for the American Institute of Chemical Engineers (A.I.Ch.E), 12, 669, 10.1002/aic.690120411 Zhang, 1995, A study of creep-feed grinding of metallic and ceramic materials, Journal of Materials Processing Technology, 48, 267, 10.1016/0924-0136(94)01658-N