The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Fery, 1909, On the approximation of black bodies which are employed as receivers, C. R., 148, 777 Gouffe, 1945, Corrections d'ouverture des corps noirs artificiels compte tenu des diffusions multiples internes, Rev. Opt., 24, 1 Sparrow, 1963, Radiant emission characteristics of diffuse conical cavities, J. Opt. Soc. Am., 53, 816, 10.1364/JOSA.53.000816 West, 1975, Spectral-absorptance measurements for laser calorimetry, J. Opt. Soc. Am., 65, 573, 10.1364/JOSA.65.000573 Swift-Hook, 1973, Penetration welding with lasers, Weld. J., 52, 492s King, 2014, Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing, J. Mater. Process. Technol., 214, 2915, 10.1016/j.jmatprotec.2014.06.005 Cunningham, 2019, Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging, Science (80-.), 363, 849, 10.1126/science.aav4687 Wang, 1992, Energy-Beam redistribution and absorption in a drilling or welding cavity, Metall. Trans. B, 23, 505, 10.1007/BF02649669 Solana, 1997, A study of the effect of multiple reflections on the shape of the keyhole in the laser processing of materials, J. Phys. D Appl. Phys., 30, 3216, 10.1088/0022-3727/30/23/006 Ho, 1997, Energy absorption in a conical cavity truncated by spherical cap subject to a focused high-intensity beam, Int. J. Heat Mass Transf., 40, 1895, 10.1016/S0017-9310(96)00223-2 Kouraytem, 2019, Effect of laser-matter interaction on molten pool flow and keyhole dynamics, Phys. Rev. Appl., 11, 10.1103/PhysRevApplied.11.064054 Khairallah, 2020, Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing, Science (80-.), 368, 660, 10.1126/science.aay7830 Lind, 2020, Geometry and absorptance of the cutting fronts during laser beam cutting Geometry and absorptance of the cutting fronts during laser beam cutting, J. Laser Appl., 032, 1, 10.2351/7.0000024 Bayat, 2019, Keyhole-induced porosities in laser-based powder bed fusion (L-PBF) of Ti6Al4V: high-fidelity modelling and experimental validation, Addit. Manuf., 30 Aucott, 2018, Revealing internal flow behaviour in arc welding and additive manufacturing of metals, Nat. Commun., 9, 1, 10.1038/s41467-018-07900-9 Fetzer, 2020, Geometry and stability of the capillary during deep-penetration laser welding of AlMgSi at high feed rates, Opt. Laser Technol., 133 Zhao, 2017, Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction, Sci. Rep., 7, 3602, 10.1038/s41598-017-03761-2 Parab, 2018, Ultrafast X-ray imaging of laser – metal additive manufacturing processes, J. Synchrotron Radiat., 25, 1467, 10.1107/S1600577518009554 Sainte-Catherine, 1991, Study of dynamic absorptivity at 10.6 µm (CO2) and 1.06 µm (Nd-YAG) wavelengths as a function of temperature, J. Phys. IV, 1, 151 Norris, 2010, Development of a time-resolved energy absorption measurement technique for laser beam spot welds, Weld. J., 89, 75 Simonds, 2018, Time-resolved absorptance and melt pool dynamics during intense laser irradiation of metal, Phys. Rev. Appl., 10, 10.1103/PhysRevApplied.10.044061 Simonds, 2020, Dynamic laser absorptance measured in a geometrically characterized stainless-steel powder layer, Phys. Rev. Appl., 13, 10.1103/PhysRevApplied.13.024057 Tan, 2013, Investigation of keyhole plume and molten pool based on a three-dimensional dynamic model with sharp interface formulation, J. Phys. D Appl. Phys., 46, 55501, 10.1088/0022-3727/46/5/055501 Ye, 2019, Energy coupling mechanisms and scaling behavior associated with laser powder bed fusion additive manufacturing, Adv. Eng. Mater., 1900185 Everton, 2016, Review of in situ process monitoring and in situ metrology for metal additive manufacturing, Mater. Des., 95, 431, 10.1016/j.matdes.2016.01.099 Spears, 2016, In-process sensing in selective laser melting (SLM) additive manufacturing, Integr. Mater. Manuf. Innov., 5, 16, 10.1186/s40192-016-0045-4 Tapia, 2014, A review on process monitoring and control in metal-based additive manufacturing, J. Manuf. Sci. Eng. Trans. ASME, 136 Clijsters, 2014, In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system, Int. J. Adv. Manuf. Technol., 75, 1089, 10.1007/s00170-014-6214-8 Mitchell, 2020, Linking pyrometry to porosity in additively manufactured metals, Addit. Manuf., 31 Zhao, 2019, Bulk-explosion-induced metal spattering during laser processing, Phys. Rev. X, 9 Hojjatzadeh, 2020, International journal of machine tools and manufacture direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding, Int. J. Mach. Tools Manuf., 153, 10.1016/j.ijmachtools.2020.103555 Shevchik, 2020, Supervised deep learning for real- time quality monitoring of laser welding with X-ray radiographic guidance, Sci. Rep., 10, 3389, 10.1038/s41598-020-60294-x Kaplan, 2009, Analysis of the keyhole and weld pool dynamics by imaging evaluation and photodiode monitoring, 1 Forien, 2020, Detecting keyhole pore defects and monitoring process signatures during laser powder bed fusion: a correlation between in situ pyrometry and ex situ X-ray radiography, Addit. Manuf. Nassar, 2014, Sensing defects during directed-energy additive manufacturing of metal parts using optical emissions spectroscopy, Solid Free Fabr. Proc., 278 Simonds, 2018, Time-resolved detection of vaporization during laser metal processing with laser-induced fluorescence, Proc. CIRP, 74, 628, 10.1016/j.procir.2018.08.072 Dilberoglu, 2017, The role of additive manufacturing in the era of industry 4.0, Proc. Manuf., 11, 545 Mukherjee, 2019, A digital twin for rapid qualification of 3D printed metallic components, Appl. Mater. Today, 14, 59, 10.1016/j.apmt.2018.11.003 Standard Reference Material (SRM) 654b, Titanium Alloy, Al-V, (National Institute of Standards and Technology; U.S. Department of Commerce, Gaithersburg, MD, 2013). Certain commercial equipment, software, and/or materials are identified in this paper in order to adequately specify the experimental procedure. In no case does such identification imply recommendation or endorsement by the National Institute of Standards. Simonds, 2020, Simultaneous high-speed x-ray transmission imaging and absolute dynamic absorptance measurements during high-power laser-metal processing, Proc. CIRP, 94, 775, 10.1016/j.procir.2020.09.135 Allen, 2020, Energy-coupling mechanisms revealed through simultaneous keyhole depth and absorptance measurements during laser-metal processing, Phys. Rev. Appl., 13, 10.1103/PhysRevApplied.13.064070 Trapp, 2017, In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing, Appl. Mater. Today, 9, 341, 10.1016/j.apmt.2017.08.006 Fabbro, 2020, Depth dependence and keyhole stability at threshold, for different laser welding regimes, Appl. Sci., 10, 1, 10.3390/app10041487 Lu, 2004, Sensitivity of Marangoni convection and weld shape variations to welding parameters in O2-Ar shielded GTA welding, Scr. Mater., 51, 271, 10.1016/j.scriptamat.2004.03.004 Alex Leung, 2019, The effect of powder oxidation on defect formation in laser additive manufacturing, Acta Mater., 166, 294, 10.1016/j.actamat.2018.12.027 Kwon, 2012, Temperature-dependent absorptance of painted aluminum, stainless steel 304, and titanium for 1.07 um and 10.6 um laser beams, Opt. Lasers Eng., 50, 114, 10.1016/j.optlaseng.2011.10.001 Martin, 2019, Dynamics of pore formation during laser powder bed fusion additive manufacturing, Nat. Commun., 10, 1987, 10.1038/s41467-019-10009-2 Gusarov, 2009, Model of radiation and heat transfer in laser-powder interaction zone at selective laser melting, J. Heat Transf., 131, 10.1115/1.3109245 Gusarov, 2005, Modelling of radiation transfer in metallic powders at laser treatment, Int. J. Heat Mass Transf., 48, 3423, 10.1016/j.ijheatmasstransfer.2005.01.044 Fabbro, 2006, Experimental study of the dynamical coupling between the induced vapour plume and the melt pool for Nd-Yag CW laser welding, J. Phys. D Appl. Phys., 39, 394, 10.1088/0022-3727/39/2/023 Fabbro, 2010, Melt pool and keyhole behaviour analysis for deep penetration laser welding, J. Phys. D Appl. Phys., 43 Rubenchik, 2018, Scaling laws for the additive manufacturing, J. Mater. Process. Technol., 257, 234, 10.1016/j.jmatprotec.2018.02.034 Fuerschbach, 1996, Measurement and prediction of efficiency in laser beam energy transfer welding, Weld. J., 75, 24s Allen, 2020, Simultaneous in operando monitoring of keyhole depth and absorptance in laser processing of AISI 316 stainless steel at 200 kHz, Proc. CIRP, 94, 419, 10.1016/j.procir.2020.09.157 Lane, 2020, Transient Laser Energy Absorption, Co-axial Melt Pool Monitoring, and Relationship to Melt Pool Morphology, Additive Manufacturing, 36, 1