The Upgrade of EAST Divertor
Tóm tắt
The scientific and the engineering missions of EAST are to explore the reactor related regimes with long pulse lengths and high plasma core confinement and solutions for power exhaust and particle control under steady state operation and to establish technology basis of full superconducting tokamaks. EAST can operate with double null or single null divertor mode. The goals of the divertor are to get high parameters plasma, long pulse operation and single or double null plasma shape. So the divertor is designed as up-down symmetry structure to provide large experimental flexibility. The divertor should have the capacity to endure higher heat flux and provide recycling and impurity control. Up to now, three generations divertors which are steel, carbon and tungsten divertor respectively have been developed and installed on EAST. The steel divertor is just used in the commissioning test of the host machine in 2006. The carbon divertor which is composed of graphite tiles, CuCrZr heat sink and stainless steel supports is commissioned to endure thermal load of no more than 4 MW/m2 in 2008. Thus the tungsten divertor which is based upon cassette and mono-block technology like ITER is expected to endure the heat flux up to 10 MW/m2 in 2014.
Tài liệu tham khảo
D.M. Yao, Z.B. Zhou, L. Cao, Design, analysis and R&D of the EAST in-vessel components. Plasma Sci. Technol. 10(3), 367–372 (2008)
L. Cao, Z. Zhou, D. Yao, J. Li, Efforts made to handling steady-state high heat flux in EAST, oral report of 7th IAEA Technical Meeting on Steady State Operation of Magnetic Fusion Devices, 14–17 May 2013
Z. Zhou, Y. Song, J. Hu, Design and application of GDC on EAST Tokamak. Fusion Eng. Des. 86(9–11), 1599–1602 (2011)
Nikolay Litunovsky, Evgeny Alekseenko, Alexey Makhankov, Igor Mazul, Development of the armoring technique for ITER divertor dome. Fusion Eng. Des. 86(9–11), 1749–1752 (2011)
C. Lei, S. Yuntao, Preload analysis of screw bolt joints on the first wall graphite tiles in EAST. Plasma Sci. Technol 14, 9 (2012)
S. Sakurai, S. Higashijima, T. Hayashi, Y.K. Shibama, H. Masuo, H. Ozaki, A. Sakasai, K. Shibanuma, Design of lower divertor for JT-60SA. Fusion Eng. Des. 85, 2187–2191 (2010)
D.M. Yao, J.G. Li, Y.T. Song, S.J. Du, J.L. Chen, P.D. Weng, EAST in-vessel components design. Fusion Eng. Des. 75–79, 491–494 (2005)
X. Liu, D. Shijun, D. Yao, J. Wei, The design, analysis and alignment of EAST divertor. Fusion Eng. Des. 84, 78–82 (2009)
Y.T. Song, X.B. Peng, H. Xie, X.F. Liu, L.M. Bao, Z.B. Zhou, L. Cao et al., Plasma facing components of EAST. Fusion Eng. Des. 85, 2323–2327 (2010)
J.I. Xiang, S. Yuntao, S. Guang, C.A.O. Lei, Z. Zibo, X.U. Tiejun et al., Optimization and update of EAST in-vessel components in 2011. Plasma Sci. Technol. 15(3), 277–281 (2013)
M. Merola, J. Palmer, The EU ITER Participating Team, EU activities in preparation of the procurement of the ITER divertor. Fusion Eng. Des. 81(1–7), 105–112 (2006)
P.H. Mertensa, T. Hiraib, J. Linkeb, O. Neubauera et al., Conceptual design for a bulk tungsten divertor tile in JET. Fusion Eng. Des. 82(15–24), 1833–1838 (2007)