The Second James K. Mitchell Lecture Undisturbed sand strength from seismic cone tests
Tóm tắt
Từ khóa
Tài liệu tham khảo
Atkinson J. H., 1981, Foundations and Slopes: An Introduction to Applications of Critical State Soil Mechanics
Baldi G., 1981, Cone Penetration Testing and Experience, 145
Campanella R. G., 1986, Use of In-Situ Tests in Geotechnical Engineering (GSP 6), 116
Duncan, J. M. The role of advanced constitutive relations in practical applications. Proceedings of the 13th International Conference on Soil Mechanics and Foundation Engineering. pp.31–48. Rotterdam: Balkema.
Durgunoglu H. T., 1975, In-Situ Measurement of Soil Properties, 151
Durgunoglu H. T., 1975, In-Situ Measurement of Soil Properties, 172
Elhakim A. F., 2003, Deformation Characteristics of Geomaterials, 1, 81
Fahey M., 1998, Geotechnical Site Characterization, 1, 49
Ghionna V. N., 2003, Deformation Characteristics of Geomaterials, 1, 527
Gregersen, O. S., Aas, G. and DiBiagio, E. Load tests on friction piles in sand. Proceedings of the 8th International Conference on Soil Mechanics and Foundation Engineering. Vol. 2, pp.109–118.
Hardin B. O., 1978, Earthquake Engineering and Soil Dynamics, 1, 3
Hoffman, B. A., Sego, D. C., Robertson, P. K. and Fourie, A. B. Thawing protocol of undisturbed samples of loose sand obtained byin-situground freezing. Proceedings of the 49th Canadian Geotechnical Conference (Frontiers of Geotechnology). Vol. 1, pp.71–80.
Jamiolkowski M., 1988, Penetration Testing in the UK, 321
Jamiolkowski, M., Ladd, C. C., Germaine, J. and Lancellotta, R. New developments in field and lab testing of soils. Proceedings of the 11th International Conference on Soil Mechanics and Foundation Engineering. Vol. 1, pp.57–154.
Jamiolkowski M., 2001, Soil Behavior and Soft Ground Construction (GSP 119), 201
Janbu, N. and Senneset, K. Effective stress interpretation ofin-situstatic penetration tests. Proceedings of the European Symposium on Penetration Testing. Vol. 2.2, pp.181–193.
Jardine R. J., 1995, Pre-Failure Deformation of Geomaterials, 2, 855
Jardine R. J., 2005, Deformation Characteristics of Geomaterials, 2, 201
Jefferies M. G., 2005, Soil Constitutive Models, Evaluation, Selection, and Calibration (GSP 128), 204
Kulhawy F. H., 1991, Calibration Chamber Testing, 197
Locat J., 2003, Characterisation and Engineering Properties of Natural Soils, 1, 3
Lunne T., 1986, Use of In-Situ Tests in Geotechnical Engineering (GSP 6), 714
Lunne, T., Lacasse, S. and Rad, N. S. General report, SPT, CPT, PMT, and recent developments inin-situtesting. Proceedings of the International Conference on Soil Mechanics and Foundation Engineering. Vol. 4, pp.2339–2403.
Lunne T., 1997, Cone Penetration Testing in Geotechnical Practice
Lunne T., 2003, Characterisation and Engineering Properties of Natural Soils, 2, 1121
Matsuo O., 1998, Geotechnical Site Characterization, 2, 1309
Mayne, P. W. Stress–strain–strength–flow parameters from enhancedin-situtests. Proceedings of the International Conference on In-Situ Measurement of Soil Properties and Case Histories. pp.27–48.
Mayne P. W., 2005, Deformation Characteristics of Geomaterials, 2, 155
Mayne, P. W. and Campanella, R. G. Versatile site characterization by seismic piezocone. Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering. Vol. 2, pp.721–724. Rotterdam: Millpress.
Mayne P. W., 1982, J. Geotech. Eng., 108, 851
Mayne, P. W., Mitchell, J. K., Auxt, J. A. and Yilmaz, R. US National Report on CPT. Proceedings of the International Symposium on Cone Penetration Testing. Swedish Geotechnical Society Report 3,95, Vol. 1, pp.263–276. (Swedish Geotechnical Society, Linköping)
Mayne P. W., 1999, Pre-Failure Deformation Characteristics of Geomaterials, 1, 419
Mimura M., 2003, Characterisation and Engineering Properties of Natural Soils, 2, 1149
Mitchell J. K., 1988, Penetration Testing 1988, 1, 245
Mitchell J. K., 1975, In-Situ Measurement of Soil Properties, 2, 279
Mitchell J. K., 1986, Use of In-Situ Tests in Geotechnical Engineering (GSP 6), 823
Mitchell J. K., 1978, J. Geotech. Eng., 104, 995
Mulilis J. P., 1977, J. Geotech. Eng., 103, 91
Olsen, R. S. and Mitchell, J. K. CPT stress normalization and prediction of soil classification. Proceedings of the International Symposium on Cone Penetration Testing. Swedish Geotechnical Society Report 3,95, Vol. 2, pp.257–262. (Swedish Geotechnical Society, Linköping)
Porcino D., 2004, Geotechnical and Geophysical Site Characterization, 2, 1843
Sandven R., 1988, Penetration Testing 1988, 2, 939
Santamarina, J. C. and Cho, G. C. Soil behavior, the role of particle shape. Advances in Geotechnical Engineering: The Skempton Conference. Vol. 1, pp.604–617. London: Thomas Telford.
Schmertmann J. H., 1975, In-Situ Measurement of Soil Properties, 2, 57
Senneset K., 1988, Penetration Testing 1988, 2, 955
Senneset K., 1989, Transportation Research Record 1235 (In-Situ Testing of Soil Properties for Transportation), 24
Stroud M. A., 1988, Penetration Testing in the UK, 29
Vesić A. S., 1977, Design of Pile Foundations. Synthesis of Highway Practice
Wride C. E., 1999, CANLEX: The Canadian Liquefaction Experiment. Data Review Report
Wroth C. P., 1988, Penetration Testing 1988, 1, 303
Yamashita S., 2003, Deformation Characteristics of Geomaterials, 1, 187
Yu H. -S., 2004, Geotechnical and Geophysical Site Characterization, 1, 3