The Influence of Pressure in the Pore System on Fire Spalling of Concrete

Hasenjäger “Über das Verhalten des Betons und Eisenbetons im Feuer und die Ausbildung von Dehnungsfugen im Eisenbetonbau” Dissertation, Techniche Hochschole Braunschweig 1935, cited in Meyer-Ottens C. (1972) “Zur Frage der Abplatzungen an Betonbauteilen aus Normalbeton bei Brandbeanspruchung”, PhD-thesis, Braunshweig, Germany, 1972.

Harmathy TZ (1965) Effect of moisture on the fire endurance of building materials Moisture in Materials in Relation to Fire Tests. ASTM Spec Tech Publ 385:74-95

Sato H (1965) Explosive spalling of prestressed concrete in fire. Fire resistance of prestressed concrete; proceedings of a symposium on the fire resistance of prestressed concrete, held under the auspices of the F.I.P. Commission on fire resistance of prestressed concrete at Braunschweig, Germany.

Dougill JW (1972) Modes of failure of concrete panels exposed to high temperature. Mag Concr Res 24(79).

Meyer-Ottens C (1972) Zur Frage der Abplatzungen an Betonbauteilen aus Normalbeton bei Brandbeanspruchung. PhD-thesis, Braunshweig.

Waubke NV, Schneider U (1973) Tensile stress in concrete due to fast vapour flow Proceedings of the international RILEM symposium. Pore Structure and Properties of Materials, Prauge

Zhukov VV (1976) Reasons of explosive spalling of concrete by fire. Beton I zhelezobeton (Concrete and Reinforcement Concrete), No. 3.

Copier WJ (1979) Spalling of normalweight and lightweight concrete on exposure to fire. Report 24(2) Heron, Holland.

Connolly RJ (1995) The spalling of concrete in fire PhD thesis. Ashton University.

Khoylou N (1997) Modelling of moisture migration and spalling behaviour in non-uniformly heated concrete. PhD thesis, University of London.

Kalifa P, Menneteau FD, Quenard D (2000) Spalling and pore pressure in HPC at high temperatures. Cement Concr Res 30:1915–1927. doi: 10.1016/S0008-8846(00)00384-7

Arita K, Harada K, Miyamoto S (2002) Thermal spalling of high-performance concrete during fire. Second international workshop structures in fire, Christchurch, New Zealand.

Breunese AJ, Fellinger JHH (2004) Spalling of concrete—an overview of ongoing research in the Netherlands. Workshop—Structures in Fire, Ottawa

Bazant ZP (2005) Concrete creep at high temperature and its interaction with fracture: recent progress. Concreep-7 conference: creep. Shrinkage and durability of concrete and concrete structures, pp 449–460.

Jansson R, Boström L (2007) Fire spalling-theories and experiments. Proceedings of the fifth international RILEM symposium on self-compacting concrete, 3–5. Ghent, Belgium.

Jansson R (2006) Liquid/steam pressure measurement inside concrete exposed to fire. Structures in fire 06, proceedings from the 4th international workshop, Aveiro, Portugal, pp 747–756.

Suhaendi SL (2007) Properties of fiber reinforced high strength concrete under high temperature conditions. PhD thesis, Hokkaido University.

Jansson R, Boström L. Spalling of concrete when exposed to fire. SP report to be published.

Boström L, Jansson R. Self-compacting concrete exposed to fire. SP report to be published.

Jansson R, Boström L (2007) Experimental study of the influence of polypropylene fibres on material properties and fire spalling of concrete. Proceedings of the fib task group 4.3 workshop. Fire design of concrete structures––from materials modelling to structural performance. Coimbra, Portugal, 8–9.

Mindeguia JC, Pimienta P, La Borderie C, Carre H (2007) Experimental study of the influence of polypropylene fibres on material properties and fire spalling of concrete. Proceedings of the fib task group 4.3 workshop. Fire design of concrete structures––from materials modelling to structural performance. Coimbra, Portugal, November 8–9.

Phan TL (2002) High-strength concrete at high temperature––an overview. In: Konig G, Dehn F, Faust T (eds) Utilization of high strength/high performance concrete, 6th international symposium. Proceedings, vol 1. June 2002, Leipzig, Germany, pp 501–518.

Lankard DR, Birkimer DL, Fondriest FF, Snyter MJ (1971) Effects of moisture content on the structural properties of portland cement concrete exposed to 500 F. ACI Special Publication SP 25, Detroit.

Schneider U, Horvat J (2003) Behaviour of ordinary concrete at high temperature. Technische Universität Wien, Heft 9.

Guo JS, Waldron P (2001) An elastic model to quantify the effect of moisture on the mechanical properties of concrete at time of test. Mag Concr Res 53(3). doi: 10.1680/macr.53.3.151.39476 .

Concrete Handbook––Material (Betonghandbok Material) (1982) A publication in Swedish from Svensk Byggtjänst, 2nd edn.

Anderberg Y, Thelandersson S (1976) Stress and deformation characteristics of concrete at high temperatures. Lund Institute of Technology Bulletin 54, Sweden

Khoury GA, Majorana CE, Pesavento F, Schrefler BA (2002) Modelling of heated concrete. Mag of Conc. Research No 2.

Petkovski M, Crouch RS (2008) Strains under transient hygro-thermal states in concrete loaded in multiaxial compression and heated to 250°C. Cement Concr Res 38.

Bazant ZP, Kaplan MF (1996) Concrete at high temperatures-material properties and mathematical models. Book published by Longman Group Limited.

Thelandersson S (1982) On the multiaxial behaviour of concrete exposed to high temperature. Nucl Eng Des 75:271–282. doi: 10.1016/0029-5493(83)90023-7

Jansson R (2008) Material properties related to fire spalling of concrete. Licentiate Thesis. Report TVBM-3143, Lund.