The Flexibility Requirements for Power Plants with CCS in a Future Energy System with a Large Share of Intermittent Renewable Energy Sources

European Commission, 2011 OECD/IEA, “World Energy Outlook 2011,” Paris, 2011. IPCC, IPCC Special Report on Renewable Energy Sources and Climate Change Mitigation. Cambridge: Cambridge University Press, 2011. ECN “Tools - Modelling Systems - REPOWERS,” 2012. [Online]. Available: http://www.ecn.nl/units/ps/models-and- tools/repowers/ [Accessed: 14-Oct-2012]. M. Verdonk and W. Wetzels, “Referentieraming Energie en Emissies: Actualisatie 2012,” PBL and ECN, 2012. van den Broek, 2011, Impact of international climate policies on CO2 capture and storage deploymentIllustrated in the Dutch energy system, Energy Policy, 39, 2000, 10.1016/j.enpol.2011.01.036 ZEP, “The Costs of CO 2 Capture, Transport and Storage - Post-demonstration CCS in the EU,” Brussels, 2011. S. Dijkstra and Et. Al., “European scenario synthesis to be used for electricity transmission network planning,” in 9th International Conference on the European Energy Market, 2012. H. Holttinen, P. Meibom, A. Orths, F. Van Hulle, B. Lange, M.O. Malley, J. Pierik, B. Ummels, J.O. Tande, A. Estanqueiro, E. Gomez, L. Söder, G. Strbac, A. Shakoor, J. Ricardo, C. Smith, M. Milligan, and E. Ela, “IEA Wind Task 25 Design and operation of power systems with large amounts of wind power,” 2009. ZEP, “The Costs of CO2 Capture - Post-demonstration CCS in the EU,” Brussels, 2011. Chalmers, 2007, Initial evaluation of the impact of post-combustion capture of carbon dioxide on supercritical pulverised coal power plant part load performance, ” Fuel, 86, 2109, 10.1016/j.fuel.2007.01.028 IEAGHG, “Operating Flexibility of Power Plants with CCS, 2012/6,” Cheltenham, UK, 2012. S. Linnenberg, J. Oexmann, and A. Kather, “Design Considerations of Post-Combustion Post Combustion CO 2 Capture Process during Part Load Operation of Coal-Fired Power Plants,” in 12th international post combustion capture network meeting, 2009, no. September. IEAGHG, “CO2 Capture at Gas Fired Power Plants, 2012/8,” Cheltenham, UK, 2012. E.ON, “Design Basis for CO2 Recovery Plant,” 2011. A. Lawal, M. Wang, P. Stephenson, and H. Yeung, “Dynamic modelling of CO2 absorption for post combustion capture in coal-fired power plants,” Fuel, vol. 88, no. 12, pp. 2455-2462, Dec. 2009. H. Kvamsdal, J. Jakobsen, and K. Hoff, “Dynamic modeling and simulation of a CO2 absorber column for post- combustion CO2 capture,” Chemical Engineering and Processing: Process Intensification, vol. 48, no. 1, pp. 135-144, Jan. 2009. S. Ziaii, S. Cohen, G.T. Rochelle, T.F. Edgar, and M. E. Webber, “Dynamic operation of amine scrubbing in response to electricity demand and pricing,” Energy Procedia, vol. 1, no. 1, pp. 4047-4053, Feb. 2009. M. Finkenrath, “Cost and Performance of Carbon Dioxide Capture from Power Generation,” IEA, Paris, 2011. L. O. Nord and O. Bolland, “Plant flexibility of a pre-combustion CO 2 capture cycle,” Energy Procedia, 2010. G. Dijkema and Et. Al., “De regelbaarheid van elektriciteitscentrales,” vol. 80, no. 4, Dec. 2009. Black & Veatch, “Supplementary study of generating alternatives for Deerhaven generating station,” 2004. MITEI, “MIT Energy Initiative Symposium on Managing Large-Scale Penetration of Intermittent Renewables,” 2011.