Texture evolution and formability under different hot rolling conditions in ultra purified 17%Cr ferritic stainless steels

Liu, 2009, Texture development and formability of strip cast 17% Cr ferritic stainless steel, ISIJ Int, 49, 890, 10.2355/isijinternational.49.890 Huh, 2005, Effect of through-thickness macro and micro-texture gradients on ridging of 17%Cr ferritic stainless steel sheet, Steel Res, 76, 797, 10.1002/srin.200506098 Yan, 2009, Effect of two-step cold rolling and annealing on texture, grain boundary character distribution and r-value of Nb+Ti stabilized ferritic stainless steel, Mater Charact, 60, 65, 10.1016/j.matchar.2008.05.006 Yazawa, 2003, Development of ferritic stainless steel sheets with excellent deep drawability by {111} recrystallization texture control, JSAE Rev, 24, 483, 10.1016/S0389-4304(03)00082-1 Almagro, 2008, Soluble fraction of stabilising elements in ferritic stainless steel, Microchim Acta, 161, 323, 10.1007/s00604-007-0925-6 Siqueira, 2011, Composition and orientation effects on the final recrystallization texture of coarse-grained Nb-containing AISI 430 ferritic stainless steels, Mater Sci Eng A, 528, 3513, 10.1016/j.msea.2011.01.007 Hamada, 2011, Effect of texture on r-value of ferritic stainless steel sheets, ISIJ Int, 51, 1740, 10.2355/isijinternational.51.1740 Raabe, 1993, Textures of ferritic stainless steel, Mater Sci Technol, 9, 302, 10.1179/026708393790172132 Sawatani, 1977, The r values and recrystallized textures of Ti stabilized low C, N-17%Cr stainless steel sheets, Tetsu-to-Hagane, 63, 843, 10.2355/tetsutohagane1955.63.5_843 Yazawa, 1999, Development of Ti-bearing high performance ferritic stainless steels R430XT and RSX-1, Kawasaki Steel Tech Rep, 40, 23 Uematsu, 1992, Effects of hot rolling conditions on hot rolled microstructures and ridging properties in 17% chromium ferritic stainless steel, Tetsu-to-Hagane, 78, 124, 10.2355/tetsutohagane1955.78.4_632 Zhang, 2011, Effects of hot rolled shear bands on formability and surface ridging of an ultra purified 21%Cr ferritic stainless steel, J Mater Process Technol, 211, 1051, 10.1016/j.jmatprotec.2011.01.005 Nakagawa, 1980, Effect of hot rolling process on deep drawability and ridging tendency of Ti stabilized 17Cr stainless steel, Tetsu-to-Hagane, 66, 657, 10.2355/tetsutohagane1955.66.6_657 Huh, 2001, Effect of intermediate annealing on texture, formability and ridging of 17%Cr ferritic stainless steel sheet, Mater Sci Eng A, 308, 74, 10.1016/S0921-5093(00)01995-X Inagaki, 1994, Fundamental aspect of texture formation in low carbon steel, ISIJ Int, 34, 313, 10.2355/isijinternational.34.313 Tsuji, 1992, Effect of initial orientation on the cold rolling behavior of solidified columnar crystals in a 19% Cr ferritic stainless steel, ISIJ Int, 32, 1319, 10.2355/isijinternational.32.1319 Butron-Guillen, 1996, Effect of finishing temperature on hot band textures in an IF steel, ISIJ Int, 36, 68, 10.2355/isijinternational.36.68 Tóth, 1990, Development of ferrite rolling textures in low- and extra low-carbon steels, Metall Trans A, 21, 2985, 10.1007/BF02647219 Wang, 2006, Texture comparison of an ordinary IF steel and a high-strength IF steel under ferritic rolling and high-temperature coiling, Mater Charact, 57, 402, 10.1016/j.matchar.2006.03.011 Jeong, 2008, Effect of hot-rolling temperature on microstructure and texture of an ultra-low carbon Ti-interstitial-free steel, Mater Lett, 62, 91, 10.1016/j.matlet.2007.04.081 Senuma, 1990, Textures of low carbon and titanium bearing extra low carbon steel sheets hot rolled below their AR3 temperatures, Acta Metall Mater, 38, 2673, 10.1016/0956-7151(90)90281-K Inagaki, 1972, The development of rolling textures in low-carbon steels, Texture, 1, 129, 10.1155/TSM.1.129 Tiitto, 2004, Evolution of texture in ferritically hot rolled Ti and Ti+Nb alloyed ULC steels during cold rolling and annealing, ISIJ Int, 44, 404, 10.2355/isijinternational.44.404 Huh, 1999, Effect of lubrication on the evolution of through-thickness textures gradients in cold rolled and recrystallized low carbon steel, Z Metallkd, 90, 124 Ray, 1994, Cold rolling and annealing textures in low carbon and extra low carbon steels, Int Mater Rev, 39, 129, 10.1179/095066094790326112 Hutchinson, 1984, Development and control of annealing textures in low-carbon steels, Int Met Rev, 29, 25, 10.1179/imtr.1984.29.1.25 Park, 2002, Evolution of microstructure and texture associated with ridging in ferritic stainless steel, ISIJ Int, 42, 100, 10.2355/isijinternational.42.100 Hölscher, 1991, Rolling and recrystallization textures of bcc steels, Steel Res, 62, 567, 10.1002/srin.199100451 Liu HT. Study of microstructure, texture and formability of Cr17 ferritic stainless steel [dissertation]. Shenyang: Northeastern University; 2009 Raabe, 1995, Textures of strip cast and hot rolled ferritic and austenitic stainless steel, Mater Sci Technol, 11, 461, 10.1179/026708395790165192 Raabe, 1992, Selective particle drag during primary recrystallization of Fe–Cr alloys, Scr Metall, 26, 19, 10.1016/0956-716X(92)90361-H Shin, 2003, The effect of texture on ridging of ferritic stainless steel, Acta Mater, 51, 4693, 10.1016/S1359-6454(03)00187-3