Test of stress-strain state and flatness parameter under bending of the corrugated part of a flat bar in the course of sheet rolling of flat bars and bands of brass alloys
Tóm tắt
Relationships for calculation of the stress-strain state, which occurs under bending on the corrugated part of a flat bar in the plastic region, are presented. Expressions for determination of the tangential and radial stresses take into account the hardening of flat bars and bands that takes place under plastic bending. When making allowance for the constancy of second volumes and the variation in longitudinal speeds of metal across the width of the flat bar in the plane of output from the rollers, a relationship for the computation of a flatness parameter under the bending of the corrugated part of the flat bar in the plastic region was obtained.
Tài liệu tham khảo
Zheleznov, Yu.D., Prokatka rovnykh listov i polos (Rolling of Flat Bands and Flat Bars), Moscow: Metallurgiya, 1971.
Grigoryan, G.G., Zheleznov, Yu.D., Chernyi, V.A., et.al., Nastroika, stabilizatsiya i kontrol’ protsessa tonkolistovoi prokatki (Adjustment, Stabilization, and Monitoring of the Sheet Rolling Process), Moscow: Metallurgiya, 1975.
Berman, S.I., Prokatka listov i lent iz tsvetnykh metallov (Rolling of Sheets and Bands of Nonferrous Metals), Moscow: Metallurgiya, 1977.
Hill, R., Matematicheskaya teoriya plastichnosti (Mathematical Theory of Plasticity), Moscow: Gostekhizdat, 1956.
Maksimov, E.A., Shatalov, R.L., and Boskhamdzhiev, N.Sh., Proizvodstvo planshetnykh polos pri prokatke (Making Flatness Bands on Rolling), Moscow: Teplotekhnik, 2008.