Tensile fatigue properties of a 3D orthogonal woven composite

Mouritz, 1999, Review of applications for advanced three-dimensional fibre textile composites, Composites, 30A, 1445, 10.1016/S1359-835X(99)00034-2 Tong, 2002 Byun, 1990, Structural characteristics of three-dimensional angle-interlock woven fabric preforms, Process Polym Polym Compos, 19, 177 Guénon, 1989, Toughness properties of a three-dimensional carbon–epoxy composite, J Mater Sci, 24, 4168, 10.1007/BF01168991 Arendts F-J, Dreschler K, Brandt J. Manufacturing and mechanical performance of composites with 3D woven fiber reinforcement. In: Proceedings of the 4th textile structural composites symposium. Philadelphia; 1989. Tanzawa, 1999, Interlaminar fracture toughness of 3D orthogonal interlocked fabric composites, Compos Sci Technol, 59, 1261, 10.1016/S0266-3538(98)00167-5 Mouritz, 1999, Mode I interlaminar fracture toughness properties of advanced textile fibreglass composites, Composites, 30, 859, 10.1016/S1359-835X(98)00197-3 Liu, 1989, Mode II interlaminar fracture toughness of three-dimensional textile structural composites, 981 Billuat F, Roussel O. Impact resistance of 3D graphite/epoxy composites. In: Poursrtip A, Street K, editors. Proceedings of the 10th international conference on composite materials, 14–18 August 1995. Woodhead Publishing Ltd; 1995. p. 551–8. Brandt, 1996, Mechanical performance of composites based on various three-dimensional woven-fibre preforms, Compos Sci Technol, 56, 381, 10.1016/0266-3538(95)00135-2 Chou, 1992, Effect of weave structure on mechanical fracture behaviour of three-dimensional carbon fiber fabric reinforced epoxy resin composites, Compos Sci Technol, 43, 117, 10.1016/0266-3538(92)90002-K Susuki I, Takatoya T. Impact damage properties of 3D carbon/bismaleimide composites. In: Proceedings of the 5th Japan international SAMPE symposium, Tokyo, 28–31 October 1997. p. 691–6. Guess, 1985, Comparison of interlocked fabric and laminated fabric Kevlar 49/Epoxy composites, J Compos Technol Res, 7, 136, 10.1520/CTR10310J Tan, 2000, Behaviour of 3D orthogonal woven CFRP composites. I: Experimental investigation, Composites, 31A, 259, 10.1016/S1359-835X(99)00070-6 Kim SJ, Lee CS, Shin H, Tong L. Anisotropic material characterisation of 3D orthogonal woven composite structures. In: Proceedings of the AIAA conference; 2001, Paper 1570. Kuo, 2006, Compressive damage in three-axis woven thermoplastic composites, J Thermoplast Compos Mater, 19, 357, 10.1177/0892705706059741 Yan, 1999, Comparison of static properties of 2D and 3D woven fabric reinforced composites, J Compos Technol Res, 21, 33, 10.1520/CTR10610J Callus, 1999, Tensile properties and failure mechanisms of 3D woven GRP composites, Composites, 30A, 1277, 10.1016/S1359-835X(99)00033-0 Cox, 1994, Failure mechanisms of 3D woven composites in tension, bending and compression, Acta Metall Mater, 42, 3967, 10.1016/0956-7151(94)90174-0 Cox, 1996, On the tensile failure of 3D woven composites, Composites, 27, 447, 10.1016/1359-835X(95)00053-5 Cox BN, Flanagan G. Handbook of analytical methods for textile composites. NASA Contractor Report 4750. Rockwell Science Center; 1996. Dadkhah, 1995, Compression–compression fatigue in 3D woven composites, Acta Metall Mater, 43, 4235, 10.1016/0956-7151(95)00137-K Ding, 1995, Comparison of the fatigue behaviour of 2-D and 3D woven fabric reinforced composites, J Mater Process Technol, 55, 171, 10.1016/0924-0136(95)01950-2 Portanova, 1992, Open hole and postimpact compressive fatigue of stitched and unstitched carbon–epoxy composites, 37 Mouritz, 2000, A mechanistic approach to the properties of stitched laminates, Composites, 31A, 1, 10.1016/S1359-835X(99)00056-1 Aymerich F, Priolo P, Sanna R, Sun CT. Fatigue behaviour of stitched composite laminates. In: Proceedings of the 13th international conference on composite materials, 25–29 June 2001, Beijing. Paper No. 1461. Aymerich, 2003, Static and fatigue behaviour of stitched graphite/epoxy composite laminates, Compos Sci Technol, 63, 907, 10.1016/S0266-3538(02)00314-7 Mouritz, 2004, Fracture and tensile fatigue properties of stitched fibreglass composites, Proc Institut Mech Eng. Part L: Mater: Des Appl, 218, 87 Chang, 2006, Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension, Composites, 37A, 1501, 10.1016/j.compositesa.2005.11.013 Chang, 2007, Flexural properties of z-pinned laminates, Composites, 38A, 224 Mouritz, 2007, Compression properties of z-pinned composite laminates, Compos Sci Technol, 67, 3110, 10.1016/j.compscitech.2007.04.017 Lee, 2002, Effect of weaving damage on the tensile properties of three-dimensional woven composites, Compos Struct, 57, 405, 10.1016/S0263-8223(02)00108-3 Mouritz, 2003, Fibre damage in the manufacture of advanced three-dimensional woven composites, Composites, 34A, 963 Anon. ASTM D 5528-94a, Standard test method for mode I interlaminar fracture toughness of unidirectional fiber-reinforced polymer matrix composites. In: Annual book of ASTM standards. Philadelphia: ASTM International; 1994. Hashemi, 1990, The analysis of interlaminar fracture in uniaxial fibre-polymer composites, Proc Royal Soc, A427, 173, 10.1098/rspa.1990.0007 Talreja, 1994, Fatigue of composites, 77 Rudov-Clark S. Experimental investigation of the tensile properties and failure mechanisms of three-dimensional woven composites. PhD Thesis, RMIT University; 2007. Tsai, 2000, Fatigue behaviour of 3D multi-layer angle interlock woven composites, Compos Sci Technol, 60, 241, 10.1016/S0266-3538(99)00120-7