Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers
Tóm tắt
Từ khóa
Tài liệu tham khảo
Akil, 2011, Kenaf fiber reinforced composites: a review, Mater. Des., 32, 4107, 10.1016/j.matdes.2011.04.008
Alex, 2014, A review on degradable hybrid natural fibre polymer composites, Int. J. Des. Manuf. Technol., 5, 137
Almeida, 2013, Hybridization effect on the mechanical properties of curaua/glass fiber composites, Compos. Part B Eng., 55, 492, 10.1016/j.compositesb.2013.07.014
André, 2006
Assamoi, 2012, The environmental comparison of landfilling vs incineration of MSW accounting for waste diversion, Waste Manag., 32, 1019, 10.1016/j.wasman.2011.10.023
Avella, 2008, Poly(lactic acid)-based biocomposites reinforced with kenaf fibres, J. Appl. Polym. Sci., 108, 3542, 10.1002/app.28004
Aziz, 2004, The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 1 – polyester resin matrix, Compos. Sci. Technol., 64, 1219, 10.1016/j.compscitech.2003.10.001
Baley, 2002, Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase, Compos. – Part A Appl. Sci. Manuf., 33, 939, 10.1016/S1359-835X(02)00040-4
Barnett, 2004, Cellulose microfibril angle in the cell wall of wood fibres, Biol. Rev. Camb. Philos. Soc., 79, 461, 10.1017/S1464793103006377
Bledzki, 1999, Composites reinforced with cellulose based fibres, Prog. Polym. Sci., 24, 221, 10.1016/S0079-6700(98)00018-5
Bledzki, 1996, Properties and modification methods for vegetable fibers for natural fiber composites, J. Appl. Polym. Sci., 59, 1329, 10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0
Bourmaud, 2016, Influence of processing temperature on mechanical performance of unidirectional polyamide 11–flax fibre composites, Ind. Crops Prod., 84, 151, 10.1016/j.indcrop.2016.02.007
Cai, 2015, Influence of alkali treatment on internal microstructure and tensile properties of abaca fibers, Ind. Crops Prod., 65, 27, 10.1016/j.indcrop.2014.11.048
Campbell, 2010, Chapter 1: introduction to composite materials, p. 3
Charlet, 2007, Characteristics of Hermès flax fibres as a function of their location in the stem and properties of the derived unidirectional composites, Compos. Part A Appl. Sci. Manuf., 38, 1912, 10.1016/j.compositesa.2007.03.006
Dittenber, 2012, Critical review of recent publications on use of natural composites in infrastructure, Compos. Part A Appl. Sci. Manuf., 43, 1419, 10.1016/j.compositesa.2011.11.019
Dong, 2014, Polylactic acid (PLA) biocomposites reinforced with coir fibres: evaluation of mechanical performance and multifunctional properties, Compos. Part A Appl. Sci. Manuf., 63, 76, 10.1016/j.compositesa.2014.04.003
Duhovic, 2009, Improving the interface strength in flax fibre poly(lactic) acid composites, J. Biobased Mater. Bioenergy, 3, 188, 10.1166/jbmb.2009.1017
Fei, 2014, Thermal properties and crystallization behavior of bamboo fiber/high-density polyethylene composites: nano-TiO2 effects, J. Appl. Polym. Sci., 131, 1, 10.1002/app.39846
Frihart, 2006, Wood structure and adhesive bond strength, 241
Goda, 2008, Fully biodegradable green composites reinforced with natural fibers, 329
Gordon, 1978
Gosline, 1999, The mechanical design of spider silks: from fibroin sequence to mechanical function, J. Exp. Biol., 202, 3295, 10.1242/jeb.202.23.3295
Gustavsson, 2005, Modification of cellulose fiber surfaces by use of a lipase and a xyloglucan endotransglycosylase, Biomacromolecules, 6, 196, 10.1021/bm049588i
Han, 2012, Effect of exfoliated graphite nanoplatelets on the mechanical and viscoelastic properties of poly(lactic acid) biocomposites reinforced with kenaf fibers, J. Mater. Sci., 47, 3535, 10.1007/s10853-011-6199-8
Han, 2012, Understanding the reinforcing mechanisms in kenaf fiber/PLA and kenaf fiber/PP composites: a comparative study, Int. J. Polym. Sci., 2012, 1, 10.1155/2012/679252
Huda, 2008, Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers, Compos. Sci. Technol., 68, 424, 10.1016/j.compscitech.2007.06.022
Hull, 1981
Kang, 2014, Improvement in the adhesion of bamboo fiber reinforced polylactide composites, J. Compos. Mater., 48, 2567, 10.1177/0021998313501013
Khalil, 2006, Chemical composition, anatomy, lignin distribution, and cell wall structure of Malaysian plant waste fibers, Bioresources, 1, 220, 10.15376/biores.1.2.220-232
Kulkarni, 1981, Mechanical behaviour of coir fibres under tensile load, J. Mater. Sci., 16, 905, 10.1007/BF00542734
La Mantia, 2011, Green composites: a brief review, Compos. Part A Appl. Sci. Manuf., 42, 579, 10.1016/j.compositesa.2011.01.017
Li, 2008, Hemp fibre reinforced composites using chelator and enzyme treatments, Compos. Sci. Technol., 68, 3293, 10.1016/j.compscitech.2008.08.022
Liu, 2012, Effect of physicochemical structure of natural fiber on transverse thermal conductivity of unidirectional abaca/bamboo fiber composites, Compos. Part A Appl. Sci. Manuf., 43, 1234, 10.1016/j.compositesa.2012.02.020
Mansor, 2013, Hybrid natural and glass fibers reinforced polymer composites material selection using analytical hierarchy process for automotive brake lever design, Mater. Des., 51, 484, 10.1016/j.matdes.2013.04.072
McGregor, 2010, High performance biodegradable composite materials, 7th Asian-Australasian Conf. Compos. Mater. 2010, 1, 47
Mohammed, 2015, A review on natural fiber reinforced polymer composite and its applications, Int. J. Polym. Sci., 2015, 1, 10.1155/2015/243947
Monteiro, 2011, Selection of high strength natural fibers, Rev. Matéria, 15, 488
Nam, 2011, Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly(butylene succinate) biodegradable composites, Compos. Part B Eng., 42, 1648, 10.1016/j.compositesb.2011.04.001
Nishino, 2003, Kenaf reinforced biodegradable composite, Compos. Sci. Technol., 63, 1281, 10.1016/S0266-3538(03)00099-X
Okubo, 2004, Development of bamboo-based polymer composites and their mechanical properties, Compos. Part A Appl. Sci. Manuf., 35, 377, 10.1016/j.compositesa.2003.09.017
Pickering, 2016, Preparation and mechanical properties of novel bio-composite made of dynamically sheet formed discontinuous harakeke and hemp fibre mat reinforced PLA composites for structural applications, Ind. Crops Prod., 84, 139, 10.1016/j.indcrop.2016.02.005
Piggott, 1987, The effect of the interface/interphase on fiber composite properties, Polym. Compos., 8, 291, 10.1002/pc.750080503
R’Mili, 2008, Statistical fracture of E-glass fibres using a bundle tensile test and acoustic emission monitoring, Compos. Sci. Technol., 68, 1800, 10.1016/j.compscitech.2008.01.018
Ramesh, 2013, Comparative evaluation on properties of hybrid glass fiber- sisal/jute reinforced epoxy composites, Procedia Eng., 51, 745, 10.1016/j.proeng.2013.01.106
Saba, 2014, A review on potentiality of nano filler/natural fiber filled polymer hybrid composites, Polymers, 6, 2247, 10.3390/polym6082247
Saba, 2015, Mechanical properties of kenaf fibre reinforced polymer composite: a review, Constr. Build. Mater., 76, 87, 10.1016/j.conbuildmat.2014.11.043
Salleh, 2012, Cold-pressed kenaf and fibreglass hybrid composites laminates: effect of fibre types, World Acad. Sci. Eng. Technol., 6, 740
Sathishkumar, 2014, Hybrid fiber reinforced polymer composites – a review, J. Reinf. Plast. Compos., 33, 454, 10.1177/0731684413516393
Satyanarayana, 2009, Biodegradable composites based on lignocellulosic fibers–an overview, Prog. Polym. Sci., 34, 982, 10.1016/j.progpolymsci.2008.12.002
Shah, 2013, Developing plant fibre composites for structural applications by optimising composite parameters: a critical review, J. Mater. Sci., 48, 6083, 10.1007/s10853-013-7458-7
Sreekala, 2002, The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres, Compos. Sci. Technol., 62, 339, 10.1016/S0266-3538(01)00219-6
Sudhir, 2014, Tensile and flexural properties of sisal/jute hybrid natural fiber composites, Int. J. Mod. Eng. Res., 4, 29
Sukmawan, 2016, Strength evaluation of cross-ply green composite laminates reinforced by bamboo fiber, Compos. Part B Eng., 84, 9, 10.1016/j.compositesb.2015.08.072
Suryanegara, 2009, The effect of crystallization of PLA on the thermal and mechanical properties of microfibrillated cellulose-reinforced PLA composites, Compos. Sci. Technol., 69, 1187, 10.1016/j.compscitech.2009.02.022
Takagi, 2004, Effect of fiber length on mechanical properties of green composites using a starch-Based resin and short bamboo fibers, JSME Int. J. Ser. A, 47, 551, 10.1299/jsmea.47.551
Takagi, 2003, The mechanical properties of bamboo fibers prepared by steam-explosion method, J. Soc. Mat. Sci. Jpn., 52, 353, 10.2472/jsms.52.353
Ticoalu, 2010, A review of current development in natural fiber composites for structural and infrastructure applications, Southern Region Engineering Conference, 1
Venkateshwaran, 2012, Prediction of tensile properties of hybrid-natural fiber composites, Compos. Part B Eng., 43, 793, 10.1016/j.compositesb.2011.08.023
Xie, 2010, Silane coupling agents used for natural fiber/polymer composites: a review, Compos. Part A Appl. Sci. Manuf., 41, 806, 10.1016/j.compositesa.2010.03.005
Yan, 2014, Flax fibre and its composites – a review, Compos. Part B Eng., 56, 296, 10.1016/j.compositesb.2013.08.014
Yan, 2016, Effect of alkali treatment on microstructure and mechanical properties of coir fibres: coir fibre reinforced-polymer composites and reinforced-cementitious composites, Constr. Build. Mater., 112, 168, 10.1016/j.conbuildmat.2016.02.182