Tensile and Combustion Properties of PP/IFR/POE/nano-CaCO3 Composites
Tóm tắt
The tensile and combustion properties of polypropylene/polyolyaltha olefin composites filled with intumescent flame retardant (IFR) and nanometer calcium carbonate (nano-CaCO3) were measured. It was found that the values of the Young’s modulus of the composites increased almost linearly, while the values of the tensile yield strength and tensile fracture strength of the composites decreased with increasing the IFR weight fraction; the values of the elongation at break of the composites decreased quickly when the IFR weight fraction was lower than 10 wt%, and then varied slightly when the IFR weight fraction was higher than 10 wt%. Moreover, the morphology of the specimens after combustion was observed and the frame retardant mechanisms of the composites were discussed.
Tài liệu tham khảo
Wang X, Sporer Y, Leuteritz A, Kuehnert I, Wagenknecht U, Heinrich G, Wang DY (2015) Comparative study of the synergistic effect of binary and ternary LDH with intumescent flame retardant on the properties of polypropylene composites. RSC Adv 5(96):78979–78985
Liang JZ, Zhang YJ (2010) A study on flame retardant properties of PP/Al(OH)3/Mg(OH)2 composites. Polym Int 59:539–542
Liang JZ, Chen Y, Jiang XH (2012) Flame retardant properties of PP/Al(OH)3/Mg(OH)2/POE/ZB nanocomposites. Polym Plast Technol Eng 51:439–445
Lai XJ, Zeng XR, Li HQ, Zhang HL (2014) Effect of polyborosiloxane on the flame retardancy and thermal degradation of intumescent flame retardant polypropylene. J Macromol Sci Part B 53(4):721–734
Xie HL, Lai XJ, Zhou RM, Li HQ, Zhang YJ, Zeng XR, Guo JH (2015) Effect and mechanism of N-alkoxy hindered amine on the flame retardancy, UV aging resistance and thermal degradation of intumescent flame retardant polypropylene. Polym Degrad Stab 118:167–177
Su XQ, Li DY, Tao J, Dai QW (2015) Synergistic effect of allophane with intumescent flame retardants on thermal behavior and fire retardancy of polypropylene. Polym Bull 72(8):2089–2104
Chen W, Liu G (2015) Flame-retardancy properties of tris(2-hydroxyethyl) isocyanurate based charring agents on polypropylene. J Appl Polym Sci 132(16):41810
Camino G, Costa L, Trossarelli L (1984) Study of the mechanism of intumescence in fire retardant polymers: part II-mechanism of action in polypropylene ammonium polyphosphate pentaerythritol mixtures. Polym Degrad Stab 7:25–31
Qian Y, Wei P, Jiang P, Zhao X, Yu H (2011) Synthesis of a novel hybrid synergistic flame retardant and its application in PP/IFR. Polym Degrad Stab 96:1134–1140
Du B, Guo Z, Song P, Liu H, Fang Z, Wu Y (2009) Flame retardant mechanism of organo-bentonite in polypropylene. Appl Clay Sci 45:178–184
Du B, Guo Z, Fang Z (2009) Effects of organo-clay and sodium dodecyl sulfonate intercalated layered double hydroxide on thermal and flame behaviour of intumescent flame retarded polypropylene. Polym Degrad Stab 94:1979–1985
Doğan Mehmet, Yılmaz Aysen, Bayramlı Erdal (2010) Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites. Polym Degrad Stab 95:2584–2588
Liang JZ, Li FJ, Feng JQ (2014) Mechanical properties and morphology of intumescent flame retardant filled polypropylene composites. Polym Adv Technol 25:638–643
Liang JZ, Feng JQ, Zou SY, Liu DF, Zhang SD (2015) Flame-retardant properties and flexural properties of polypropylene/intumescent composites. Adv Polym Technol 34:320–324
Liang JZ, Feng JQ, Liu DF, Li FJ, Jiang XH, Zhang SD, Flame-retardant properties and impact toughness of PP/IFR/POE nanocomposites. Adv Polym Technol. doi:10.1002/adv.21551
Nicolais L, Narkis M (1971) Stress–strain behavior of styrene-acrylonitrile/glass bead composites in the glassy region. Polym Eng Sci 11:194–199
Liang JZ, Li RKY (1999) Tensile properties and morphology of PP/EPDM/glass bead ternary composites. Polym Compos 20:413–422
Liang JZ, Li RKY (1998) Mechanical properties and morphology of glass bead filled polypropylene composites. Polym Compos 19:698–703
Liang JZ, Li RKY (2001) Measurement of dispersion of glass beads in PP matrix. J Reinf Plast Compos 20:630–638