Temperature influence in different orthopaedic saw blades

Bruun, 1987, Heat generation during drilling in cancellous bone, Acta Orthop Scand, 58, 705 Eriksson, 1984, Heat induced bone tissue injury, Thesis Eriksson, 1984, Heat caused by drilling cortical bone, Acta Orthop Scand, 55, 629, 10.3109/17453678408992410 Fonden, 1977, Sågning i ben Haddad, 1987, Biological fixation of porous-coated implants, J Bone Joint Surg, 69A, 1459 Holm, 1980, The formation of stress by acrylic bone cements during fixation of the acetabular prosthesis, Acta Orthop Scand, 51, 719, 10.3109/17453678008990866 Huiskes, 1980, Some fundamental aspects of human joint replacement: analyses of stresses and heat conduction in bone-prosthesis structures, Acta Orthop Scand Suppl, 51, 185, 10.3109/ort.1980.51.suppl-185.01 Klip, 1976, Sawing in bone Krause, 1982, Temperature clevation in orthopaedic cutting operations, J Biomech, 15, 267, 10.1016/0021-9290(82)90173-7 Labitzke, 1974, Intraoperative temperaturmessungen in der hüftchirurgie während der polymerisation des knochenzementes Palacos, Arch Orthop Unfall-Chir, 79, 341, 10.1007/BF00418804 Lidgren, 1987, Bone cement improved by vacuum mixing and chilling, Acta Orthop Scand, 57, 27, 10.3109/17453678709146338 Ludewig, 1971, Temperaturmessungen Beim Knochensägen Matthews, 1972, Temperature measured in human cortical bone when drilling, J Bone Joint Surg, 54A, 297, 10.2106/00004623-197254020-00008 Matthews, 1984, The thermal effects of skeletal fixation-pin insertion in bone, J Bone Joint Surg, 66A, 1077, 10.2106/00004623-198466070-00015 Mjöberg, 1986, Loosening of the cemented hip prosthesis: the importance of heat injury, Acta Orthop Scand Suppl, 57, 221, 10.3109/17453678609157925 Pallan, 1960, Histological changes in bone after insertion of skeletal fixation pins, J Oral Surg Anesth Hosp D Serv, 18, 400 Reckling, 1977, The bone-cement interface temperature during total joint replacement, J Bone Joint Surg, 59A, 80, 10.2106/00004623-197759010-00014 Ryd, 1986, Micromotion in knee arthroplasty: a roentgen stereophotogrammetric analysis of tibial component fixation, Acta Orthop Scand Suppl, 220 Ryd, 1990, Porous coated anatomic tricompartmental tibial component fixation: relation between prosthetic position and micromotion, Clin Orthop, 251, 189, 10.1097/00003086-199002000-00032 Seidel, 1977, Intraoperative Temperturmessungen and der Zementknochengrenze bei TEP-Implantation, Arch Orthop Unfall-Chir, 90, 251, 10.1007/BF00415478 Schmidt, 1950, Heat in metal cutting, 218 Tetsch, 1974, Development of raised temperature after osteotomies, J Oral Maxillofac Surg, 2, 141 Toksvig-Larsen, 1989, Temperature elevation during knee arthroplasty, Acta Orthop Scand, 60, 439, 10.3109/17453678909149314 Wevers, 1989, Orthopedic sawblades: a case study, J Arthroplasty, 2, 43, 10.1016/S0883-5403(87)80030-X Wiggins, 1989, Orthogonal machining of bone, ASME, 100, 122