Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn

Kahles, 1978, High speed machining possibilities and needs, Ann. CIRP, 27, 551

Schulz, 1992, High speed machining, Ann. CIRP, 41, 637, 10.1016/S0007-8506(07)63250-8

Shaw, 1984, Metal Cutting Principles, 284

Usui, 1978, Analytical prediction of three dimensional cutting process (part 3): Cutting temperature and crater wear of carbide tool, Trans. ASME, J. Eng. Ind., 100, 236, 10.1115/1.3439415

Rabinowicz, 1961, A study of abrasive wear under three body conditions, Wear, 4, 345, 10.1016/0043-1648(61)90002-3

Mackawa, 1989, Analytical prediction of flank wear of carbide tools in turning plain carbon steels (part 2), Bull. Jpn. Soc. Prec. Eng., 23, 126

Brandt, 1987, An electron microscopy and cathode-luminescence study of chemical reaction between tool and workpiece when turning steel with alumina based ceramics, Wear, 115, 243, 10.1016/0043-1648(87)90215-8

Hartung, 1982, Theoretical considerations in the machining of nickel-based alloys, Ann. CIRP, 31, 72

Komanduri, 1986, Status of high speed machining, Carbide Tool J., 18, 29

Vigneau, 1982, Behaviour of ceramic tools during the machining of nickel base alloys, Ann. CIRP, 31, 35, 10.1016/S0007-8506(07)63264-8

Bhattacharyya, 1983, Wear mechanisms of Sialon ceramic tools when machining nickel-based materials, Met. Technol., 10, 482, 10.1179/030716983803291415

Narutaki, 1993, High-speed machining of Inconel 718 with ceramic tools, Ann. CIRP, 42, 103, 10.1016/S0007-8506(07)62402-0

Vigneau, 1987, Influence of the microstructure of the composite ceramic tools on their performance when machining nickel alloys, Ann. CIRP, 36, 13, 10.1016/S0007-8506(07)62543-8

El-Bestawi, 1993, Performance of whisker-reinforced ceramic tools in milling nickel-based superalloy, Ann. CIRP, 42, 99, 10.1016/S0007-8506(07)62401-9

Turkovich, 1979, Influence of very high cutting speed on the chip formation mechanics, 241

Komanduri, 1981, New observations on the mechanism of chip formation when machining titanium alloys, Wear, 69, 179, 10.1016/0043-1648(81)90242-8

Schulz, 1989, Aspects in cutting mechanism in high speed cutting, Ann. CIRP, 38, 51, 10.1016/S0007-8506(07)62650-X

Maekawa, 1994, High-speed end milling of Ti6Al6V2Sn titanium alloy, 431

Maekawa, 1994, The effects of cutting speed and feed on chip flow and tool wear in the machining of titanium alloy, 152

Pálmai, 1987, Cutting temperature in intermittent cutting, Int. J. Mach. Tools Manufact., 27, 261, 10.1016/S0890-6955(87)80055-X

Stephenson, 1992, Tool temperatures in interrupted metal cutting, Trans. ASME J. Eng. Ind., 114, 127, 10.1115/1.2899765

Bishop, 1956, An approximate method for determining the temperature reached in steady motion problems of plane plastic strain, Q. J. Mech. Appl. Math., 9, 236, 10.1093/qjmam/9.2.236