Technoeconomic analysis of thermoelectric power plant condensers with nonwetting surfaces

Energy - Tập 227 - Trang 120450 - 2021
K. Nithyanandam1, P. Shoaei1, R. Pitchumani1
1Advanced Materials and Technologies Laboratory, Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA, 24061-0238, USA

Tài liệu tham khảo

Pan, 2018, Cooling water use in thermoelectric power generation and its associated challenges for addressing water-energy nexus, Water-Energy Nexus, 1, 26, 10.1016/j.wen.2018.04.002 Nowling, 2015, Best practices for maximizing condenser efficiency, Power, 159, 56 Zhang, 2015, A review of the recent advances in superhydrophobic surfaces and the emerging energy-related applications, Energy, 82, 1068, 10.1016/j.energy.2015.01.061 Miljkovic, 2013, Condensation heat transfer on superhydrophobic surfaces, MRS Bull, 38, 397, 10.1557/mrs.2013.103 Anand, 2012, Enhanced condensation on lubricant-impregnated nanotextured surfaces, ACS Nano, 6, 10122, 10.1021/nn303867y Sparrow, 1964 Ma, 2012, Wetting mode evolution of steam dropwise condensation on superhydrophobic surface in the presence of noncondensable gas, J Heat Tran, 134 Walker, 2012, Economic impact of condenser fouling in existing thermoelectric power plants, Energy, 44, 429, 10.1016/j.energy.2012.06.010 Zhang, 2005, Engineering nanoscale roughness on hydrophobic surface—preliminary assessment of fouling behaviour, Sci Technol Adv Mater, 6, 236, 10.1016/j.stam.2005.03.003 Tesler, 2015, Extremely durable biofouling-resistant metallic surfaces based on electrodeposited nanoporous tungstite films on steel, Nat Commun, 6, 1, 10.1038/ncomms9649 Feng, 2016, Copper-based superhydrophobic materials with long-term durability, stability, regenerability, and self-cleaning property, Colloid Surface Physicochem Eng Aspect, 508, 39, 10.1016/j.colsurfa.2016.08.017 Lv, 2016, Drag reduction and heat transfer characteristics of water flow through the tubes with superhydrophobic surfaces, Energy Convers Manag, 113, 165, 10.1016/j.enconman.2016.01.034 Daniello, 2009, Drag reduction in turbulent flows over superhydrophobic surfaces, Phys Fluids, 21, 851, 10.1063/1.3207885 Enright, 2006, January. Friction factors and Nusselt numbers in microchannels with superhydrophobic walls, 47608, 599 Hatte, 2021, Analysis of laminar convective heat transfer over structured nonwetting surfaces, Int J Heat Mass Tran, 167, 120810, 10.1016/j.ijheatmasstransfer.2020.120810 Haghdoost, 2014, Fabricating superhydrophobic surfaces via a two-step electrodeposition technique, Langmuir, 30, 4183, 10.1021/la403509d Teshima, 2005, Transparent ultra water-repellent poly (ethylene terephthalate) substrates fabricated by oxygen plasma treatment and subsequent hydrophobic coating, Appl Surf Sci, 244, 619, 10.1016/j.apsusc.2004.10.143 Ebert, 2012, Durable Lotus-effect surfaces with hierarchical structure using micro-and nanosized hydrophobic silica particles, J Colloid Interface Sci, 368, 584, 10.1016/j.jcis.2011.09.049 Li, 2008, Stable superhydrophobic surface: fabrication of interstitial cotton-like structure of copper nanocrystals by magnetron sputtering, Sci Technol Adv Mater, 9, 10.1088/1468-6996/9/2/025006 Jain, 2017, Facile fabrication of durable copper-based superhydrophobic surfaces via electrodeposition, Langmuir, 34, 3159, 10.1021/acs.langmuir.7b02227 Jain, 2017, Fractal model for wettability of rough surfaces, Langmuir, 33, 7181, 10.1021/acs.langmuir.7b01524 Anozie, 2011, The search for optimum condenser cooling water flow rate in a thermal power plant, Appl Therm Eng, 31, 4083, 10.1016/j.applthermaleng.2011.08.014 Wang, 2014, Feasibility analysis of changing turbine load in power plants using continuous condenser pressure adjustment, Energy, 64, 533, 10.1016/j.energy.2013.11.001 Saari, 2014, Comparison of power plant steam condenser heat transfer models for on-line condition monitoring, Appl Therm Eng, 62, 37, 10.1016/j.applthermaleng.2013.09.005 Li, 2016, On-line fouling monitoring model of condenser in coal-fired power plants, Appl Therm Eng, 104, 628, 10.1016/j.applthermaleng.2016.04.131 Medica-Viola, 2018, Numerical model for on-condition monitoring of condenser in coal-fired power plants, Int J Heat Mass Tran, 117, 912, 10.1016/j.ijheatmasstransfer.2017.10.047 Laskowski, 2016, Relations for steam power plant condenser performance in off-design conditions in the function of inlet parameters and those relevant in reference conditions, Appl Therm Eng, 103, 528, 10.1016/j.applthermaleng.2016.04.127 Laskowski, 2020, 117910 Laskowski, 2016, Selecting the cooling water mass flow rate for a power plant under variable load with entropy generation rate minimization, Energy, 107, 725, 10.1016/j.energy.2016.04.074 Pattanayak, 2019, Thermal performance assessment of steam surface condenser, Case Stud Therm Eng, 14, 100484, 10.1016/j.csite.2019.100484 Bergman, 2011 Dittus, 1930, vol. 2, 371 Coulson, 1983, vol. 6 Griffith, 1983, 2, 5 Nebot, 2007, Model for fouling deposition on power plant steam condensers cooled with seawater: effect of water velocity and tube material, Int J Heat Mass Tran, 50, 3351, 10.1016/j.ijheatmasstransfer.2007.01.022 Webb, 2011, Enhanced condenser tubes in a nuclear power plant for heat rate improvement, Heat Tran Eng, 32, 905, 10.1080/01457632.2011.562756 Clamond, 2009, Efficient resolution of the Colebrook equation, Ind Eng Chem Res, 48, 3665, 10.1021/ie801626g Feng, 2011, Evaluating capital cost estimation programs, Chem Eng, 118, 22 Sieder, 2004 Mazzilli Van Rossum, 1995 Thulukkanam, 2013 Nelder, 1965, A simplex method for function minimization, Comput J, 7, 308, 10.1093/comjnl/7.4.308 Enright, 2014, Dropwise condensation on micro-and nanostructured surfaces, Nanoscale Microscale Thermophys Eng, 18, 223, 10.1080/15567265.2013.862889