Taber vibration isolator for vacuum and cryogenic applications

Review of Scientific Instruments - Tập 70 Số 6 - Trang 2742-2750 - 1999
Hardy Chan1, J. Long1, John C. Price1
1Department of Physics, CML, University of Colorado, Boulder, Colorado 80309

Tóm tắt

We present a procedure for the design and construction of a passive, multipole, mechanical high-stop vibration isolator. The isolator, consisting of a stack of metal disks connected by thin wires, attenuates frequencies in the kilohertz range, and is suited to both vacuum and cryogenic environments. We derive an approximate analytical model and compare its predictions for the frequencies of the normal modes to those of a finite element analysis. The analytical model is exact for the modes involving only motion along and rotation about the longitudinal axis, and it gives a good approximate description of the transverse modes. These results show that the high-frequency behavior of a multistage isolator is well characterized by the natural frequencies of a single stage. From the single-stage frequency formulas, we derive relationships among the various geometrical parameters of the isolator to guarantee equal attenuation in all degrees of freedom. We then derive expressions for the attenuation attainable with a given isolator length, and find that the most important limiting factor is the elastic limit of the spring wire material. For our application, which requires attenuations of 250 dB at 1 kHz, our model specifies a six-stage design using brass disks of approximately 2 cm in both radius and thickness, connected by 3 cm steel wires of diameters ranging from 25 to 75 μm. We describe the construction of this isolator in detail, and compare measurements of the natural frequencies of a single stage with calculations from the analytical model and the finite element package. For translations along and rotations about the longitudinal axes, all three results are in agreement to within 10% accuracy.

Từ khóa


Tài liệu tham khảo

1987, Science, 237, 150, 10.1126/science.237.4811.150

1999, Nucl. Phys. B, 539, 23, 10.1016/S0550-3213(98)00711-1

1987, Phys. Rev. Lett., 59, 2079, 10.1103/PhysRevLett.59.2079

1992, Rev. Sci. Instrum., 63, 3815, 10.1063/1.1143277

1991, Meas. Sci. Technol., 2, 846, 10.1088/0957-0233/2/9/003

1996, Rev. Sci. Instrum., 67, 208, 10.1063/1.1146573

Thông tin
Thông tin xuất bản

Review of Scientific Instruments

Tập 70 Số 6

2742-2750

Thông tin tác giả