TPR–TPD–TPO studies on CGO/NiO and CGO/CuO ceramics obtained from freeze-dried precursors

Minh, 1993, Ceramic fuel cells, J. Am. Ceram. Soc., 76, 563, 10.1111/j.1151-2916.1993.tb03645.x Brown, 2000, Structure/performance relations for Ni/Yttria‐stabilized zirconia anodes for solid oxide fuel cells, J. Electrochem. Soc., 147, 475, 10.1149/1.1393220 Paz-Fiuza, 2010, Development of Fe–Ni/YSZ-GDC electrocatalysts for application as SOFC anodes: XRD and TPR characterization and evaluation in the ethanol steam reforming reaction, Int. J. Hydrog. Energy, 35, 11216, 10.1016/j.ijhydene.2010.07.026 Ding, 2012, A comparative study of NiO–Ce0.9Gd0.1O1.95 nanocomposite powders synthesized by hydroxide and oxalate co-precipitation methods, Ceram. Int., 38, 85, 10.1016/j.ceramint.2011.06.041 Mogensen, 2000, Physical, chemical and electrochemical properties of pure and doped ceria, Solid State Ion., 129, 63, 10.1016/S0167-2738(99)00318-5 Steele, 2001, Materials for fuel-cell technologies, Nature, 414, 345, 10.1038/35104620 Zec, 2009, Chemical reduction of nanocristalline CeO2, Ceram. Int., 35, 195, 10.1016/j.ceramint.2007.10.031 Yee, 2000, The reactions of ethanol over M/CeO2 catalysts. Evidence of carbon–carbon bond dissociation at low temperatures over Rh/CeO2, Catal. Today, 63, 327, 10.1016/S0920-5861(00)00476-4 Huang, 2005, Influence of the oxygen partial pressure on the reduction of CeO2 and CeO2–ZrO2 ceramics, Solid State Sci., 7, 539, 10.1016/j.solidstatesciences.2005.02.005 Jiang, 2001, Studies of pore structure, temperature-programmed reduction performance, and micro-structure of CuO/CeO2 catalysts, Appl. Surface Sci., 173, 208, 10.1016/S0169-4332(00)00897-7 Gil, 2007, Sinterability, microstructures and electrical properties of Ni/Gd-doped ceria cermets used as anode materials for SOFCs, J. Eur. Ceram. Soc., 27, 4205, 10.1016/j.jeurceramsoc.2007.02.119 Gorte, 2009, Nanostructured anodes for solid oxide fuel cells, Curr. Opin. Colloid Interface Sci., 14, 236, 10.1016/j.cocis.2009.04.006 Bieberle, 2001, The electrochemistry of Ni pattern anodes used as solid oxide fuel cell model electrodes, J. Electrochem. Soc., 148, A646, 10.1149/1.1372219 Okawa, 2005, Sinterability, microstructures and electrical properties of Ni/Sm-doped ceria cermet processed with nanometer-sized particles, J. Eur. Ceram. Soc., 25, 473, 10.1016/j.jeurceramsoc.2004.01.011 Gadow, 2008, Manufacturing technologies for nanocomposite ceramic structural materials and coatings, Mater. Sci. Eng. B, 148, 58, 10.1016/j.mseb.2007.09.066 Shao, 2012, Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells, Prog. Mater. Sci., 57, 804, 10.1016/j.pmatsci.2011.08.002 El-Himri, 2004, Pt2Mo3N and PdPtMo3N: new interstitial nitrides prepared from freeze-dried precursors, J. Solid State Chem., 177, 3219, 10.1016/j.jssc.2004.06.006 Pérez-Coll, 2007, Re-examination of bulk and grain boundary conductivities of Ce1−xGdxO2−δ ceramics, Electrochim. Acta, 52, 2001, 10.1016/j.electacta.2006.08.009 Amsif, 2009, Synthesis and characterization of BaCeO3-based proton conductors obtained from freeze-dried precursor, J. Eur. Ceram. Soc., 29, 131, 10.1016/j.jeurceramsoc.2008.06.001 Pérez-Coll, 2006, Grain boundary conductivity of Ce0.8Ln0.2O2−δ ceramics (Ln=Y, La, Gd, Sm) with and without Co-doping,, Electrochim. Acta, 51, 6463, 10.1016/j.electacta.2006.04.032 X׳Pert HighScore Plus, version 2.2d, PANalytical BV 2004. Wei, 2010, Preparation and characterization of Ce1−xNixO2 as oxygen carrier for selective oxidation methane to syngas in absence of gaseous oxygen, J. Rare Earths, 28, 357, 10.1016/S1002-0721(10)60358-4 Liu, 2013, Ni/Ce1−xMx catalyst generated from metallo-organic network for autothermal reforming of diesel surrogate, Appl. Catal. A: Gen., 459, 89, 10.1016/j.apcata.2013.04.012 Shan, 2003, Reduction property and catalytic activity of Ce1−xNixO2 mixed oxide catalysts for CH4 oxidation, Appl. Catal. A: Gen., 246, 1, 10.1016/S0926-860X(02)00659-2 Wandekar, 2006, Nanostructured Ni-based cathode materials for intermediate temperature SOFC, Mater. Chem. Phys., 99, 289, 10.1016/j.matchemphys.2005.10.025 Hari Prasad, 2011, Effect of nickel nano-particle sintering on methane reforming activity of Ni-CGO cermet anodes for internal steam reforming SOFC׳s, Appl. Catal. B: Environ., 101, 531, 10.1016/j.apcatb.2010.10.026 Pintar, 2005, TPR, TPO, and TPD examinations of Cu0.15Ce0.85O2−y mixed oxides prepared by co-precipitation, by the sol–gel peroxide route, and by citric acid-assisted synthesis, J. Colloid Interface Sci., 285, 218, 10.1016/j.jcis.2004.11.049 Zhang, 2012, Cu-doped CeO2 spheres: synthesis, characterization, and catalytic activity, Catal. Commun., 26, 164, 10.1016/j.catcom.2012.05.001 Guimarães-Maciel, 2012, Effect of nature of ceria support in CuO/CeO2 catalyst for PROX-CO reaction, Fuel, 97, 245, 10.1016/j.fuel.2012.02.004 Jia, 2012, CO oxidation over CuO/Ce1−xCuxO2−δ and Ce1−xCuxO2−δ catalysts: synergetic effects and kinetic study, J. Catal., 289, 199, 10.1016/j.jcat.2012.02.010 Mai, 2011, Highly active Ce1−xCuxO2 nanocomposite catalysts for the low temperature oxidation of CO, Appl. Surface Sci., 257, 7551, 10.1016/j.apsusc.2011.03.124 Araujo, 2012, CuO–CeO2 catalysts synthesized in one-step: characterization and PROX performance, Int. J. Hydrog. Energy, 37, 5498, 10.1016/j.ijhydene.2011.12.143