Synthesis of sodium silicate using industrial by-products glauber’s salt and microsilica: Effective reuse of the waste

Alam, 2019, Novel low temperature synthesis of sodium silicate and ordered mesoporous silica from incineration bottom ash, J. Clean. Prod., 211, 874, 10.1016/j.jclepro.2018.11.173 Chen, 2013, Preparation and characterization of foam ceramics from red mud and fly ash using sodium silicate as foaming agent, Ceram. Int., 39, 1923, 10.1016/j.ceramint.2012.08.042 Cristelo, 2020, Recycling municipal solid waste incineration slag and fly ash as precursors in low-range alkaline cements, Waste Manage., 104, 60, 10.1016/j.wasman.2020.01.013 García-Romero, 2009, Corrosion behaviour of several aluminium alloys in contact with a thermal storage phase change material based on Glauber’s salt, Corrosion Sci., 51, 1263, 10.1016/j.corsci.2009.03.006 Gobinath, 2020, Banana fibre-reinforcement of a soil stabilized with sodium silicate, Silicon, 12, 357, 10.1007/s12633-019-00124-6 Hendi, 2017, Simultaneous effects of microsilica and nanosilica on self-consolidating concrete in a sulfuric acid medium, Constr. Build. Mater., 152, 192, 10.1016/j.conbuildmat.2017.06.165 Hu, 2020, Preparation of SiC nanowires on graphite paper with silicon powder, Mater. Lett., 269, 10.1016/j.matlet.2020.127444 Jamshidi, 2016, Potency of different carbon sources in reduction of microsilica to synthesize SiC from mechanically activated powder mixtures, Int. J. Appl. Ceram. Technol., 13, 937, 10.1111/ijac.12567 Kamseu, 2017, Substitution of sodium silicate with rice husk ash-NaOH solution in metakaolin based geopolymer cement concerning reduction in global warming, J. Clean. Prod., 142, 3050, 10.1016/j.jclepro.2016.10.164 Karthick, 2018, Performance enhancement of a building-integrated photovoltaic module using phase change material, Energy, 142, 803, 10.1016/j.energy.2017.10.090 Khedkar, 2019, Surface modified sodium silicate based superhydrophobic silica aerogels prepared via ambient pressure drying process, J. Non-Cryst. Solids, 511, 140, 10.1016/j.jnoncrysol.2019.02.004 Kuz'min, 2019, Obtaining of Al-Si foundry alloys using amorphous microsilica - Crystalline silicon production waste, J. Alloy. Compd., 806, 806, 10.1016/j.jallcom.2019.07.312 Li, 2020, The waste treatment and recycling efficiency of industrial waste processing based on two-stage data envelopment analysis with undesirable inputs, J. Clean. Prod., 242, 10.1016/j.jclepro.2019.118279 Li, 2018, Bibliometric analysis of research trends on solid waste reuse and recycling during 1992–2016, Resour. Conserv. Recycl., 130, 109, 10.1016/j.resconrec.2017.11.008 Li, 2020, Preparation and characterization of sodium silicate impregnated Chinese fir wood with high strength, water resistance, flame retardant and smoke suppression, J. Mater. Res. Technol., 9, 1043, 10.1016/j.jmrt.2019.10.035 Li, 2019, Preparation of red mud-based geopolymer materials from MSWI fly ash and red mud by mechanical activation, Waste Manage., 83, 202, 10.1016/j.wasman.2018.11.019 Luukkonen, 2020, Influence of sodium silicate powder silica modulus for mechanical and chemical properties of dry-mix alkali-activated slag mortar, Constr. Build. Mater., 233, 10.1016/j.conbuildmat.2019.117354 Mao, 2020, Development and application of novel sodium silicate microcapsule-based self-healing oil well cement, Materials, 13, 456, 10.3390/ma13020456 Mohamed Ismail, 2020, Synthesis and characterisation of sodium silicate from spent foundry sand: Effective route for waste utilisation, J. Clean. Prod., 264, 10.1016/j.jclepro.2020.121689 Nematollahi, 2015, Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate, Ceram. Int., 41, 5696, 10.1016/j.ceramint.2014.12.154 Owoeye, 2020, Preparation and characterization of nano-sized silica xerogel particles using sodium silicate solution extracted from waste container glasses, Mater Chem Phys, 248, 10.1016/j.matchemphys.2020.122915 Pham, 2019, Oxidative and Frictional Behavior of a Binary Sodium Borate-Silicate Composite in High-Temperature Lubricant Applications, Ind. Eng. Chem. Res., 59, 2921, 10.1021/acs.iecr.9b05767 Pundienė, 2020, The synergistic effect of adding a blend of deflocculants and microsilica on the properties of high temperature resistant lightweight concrete with cenospheres, Constr. Build. Mater., 230, 10.1016/j.conbuildmat.2019.116961 Quanli, 2018, Effect of microsilica addition on the properties of colloidal silica bonded bauxite-andalusite based castables, Ceram. Int., 44, 3064, 10.1016/j.ceramint.2017.11.067 Shan, 2019, One-pot synthesis of mesoporous chitosan-silica composite from sodium silicate for application in Rhenium(VII) adsorption, Microporous Mesoporous Mat., 278, 44, 10.1016/j.micromeso.2018.10.030 Szelag, 2018, Development of cracking patterns in modified cement matrix with microsilica, Materials, 11, 1928, 10.3390/ma11101928 Tang, 2017, Integral recycling of municipal solid waste incineration (MSWI) bottom ash fines (0–2mm) and industrial powder wastes by cold-bonding pelletization, Waste Manage., 62, 125, 10.1016/j.wasman.2017.02.028 Tang, 2017, Optimization of sulfate removal from brackish water by membrane capacitive deionization (MCDI), Water Res., 121, 302, 10.1016/j.watres.2017.05.046 Tong, 2018, Use of Vietnamese rice husk ash for the production of sodium silicate as the activator for alkali-activated binders, J. Clean. Prod., 201, 272, 10.1016/j.jclepro.2018.08.025 Vaisman, 2015, The scientific and technological aspects of foam glass production, Glass Phys. Chem., 41, 157, 10.1134/S1087659615020133 Vinai, 2019, Production of sodium silicate powder from waste glass cullet for alkali activation of alternative binders, Cem. Concr. Res., 116, 45, 10.1016/j.cemconres.2018.11.008 Wang, 2020, Investigation of silica fume as foam cell stabilizer for foamed concrete, Constr. Build. Mater., 237, 10.1016/j.conbuildmat.2019.117514 Xiao, 2018, An overview of China’s recyclable waste recycling and recommendations for integrated solutions, Resour. Conserv. Recycl., 134, 112, 10.1016/j.resconrec.2018.02.032 Xu, 2019, Hydration mechanism and sintering characteristics of hydratable alumina with microsilica addition, Ceram. Int., 45, 13780, 10.1016/j.ceramint.2019.04.074 Yang, 2015, Phosphate-assisted one-pot synthesis of silver phosphate-mesoporous silica composite from sodium silicate and silver nitrate, Microporous Mesoporous Mat., 204, 58, 10.1016/j.micromeso.2014.11.006 Yeo, 2018, Sintering and optical properties of transparent ZnS ceramics by pre-heating treatment temperature, J Electroceram, 41, 1, 10.1007/s10832-018-0137-y Yuan, 2016, A homogeneous polysulfone nanofiltration membrane with excellent chlorine resistance for removal of Na2SO4 from brine in chloralkali process, Desalination, 379, 16, 10.1016/j.desal.2015.10.006 Zhi, 2013, Study on the Preparing of Nanowhite Carbon Black by Silica Fume, Appl. Mech. Mater., 423–426, 554, 10.4028/www.scientific.net/AMM.423-426.554 Zhou, 2020, Estimating the feasibility of using industrial solid wastes as raw material for polyurethane composites with low fire hazards, J. Clean. Prod., 257, 10.1016/j.jclepro.2020.120606