Synthesis of fine-crystalline tetragonal barium titanate in low-density water fluid

Duran, 2002, Densification behavior, microstructure development and dielectric properties of pure BaTiO3 prepared by thermal decomposition of (Ba, Ti)-citrate polyester resins, Ceram. Int., 28, 283, 10.1016/S0272-8842(01)00092-X Maison, 2003, Phase content, tetragonality and crystallite size of nanoscaled barium titanate synthesized by catecholate process: Effect of calcinations temperature, J. Eur. Ceram. Soc., 23, 127, 10.1016/S0955-2219(02)00071-7 Yoon, 2004, Processing of barium titanate tapes with different binders for MLCC applications –Part I: Optimization using design of experiments, J. Eur. Ceram. Soc., 24, 739, 10.1016/S0955-2219(03)00333-9 Joshi, 2006, Surfactant-free hydrothermal synthesis of highly tetragonal barium titanate nanowires: a structural investigation, J. Phys. Chem. B, 110, 12249, 10.1021/jp0600110 Hsieh, 1990, The effect of powder processing on the sintering behavior of high-purity stoichiometric BaTiO3, Ceram. Int., 16, 39, 10.1016/0272-8842(90)90061-J Parish, 1984, Narrow size distribution powders from commercial powders, Ceram. Int., 10, 75, 10.1016/0272-8842(84)90029-4 Chen, 2003, Preparation and properties of barium titanate nanopowder by conventional and high-gravity reactive precipitation methods, Scr. Mater., 49, 509, 10.1016/S1359-6462(03)00361-0 Medvedev, 1998, Technological methods for barium titanate synthesis, Glass Ceram., 55, 311, 10.1007/BF02694776 Ch. Pithan, 2005, Progress in synthesis of nanocrystalline BaTiO3 powders for MLCC, Int. J. Appl. Ceram. Technol., 2, 1, 10.1111/j.1744-7402.2005.02008.x Mohammadi, 2011, Sol–gel derived nanocrystalline and mesoporous barium strontium titanate prepared at room temperature, Particuology, 9, 235, 10.1016/j.partic.2010.08.012 Kwon, 2006, Solvothermal synthesis of nano-sized barium titanate powders, Mater. Lett., 60, 979, 10.1016/j.matlet.2005.10.089 Vinitini, 2006, Synthesis of barium titanate nanopowder using polymeric precursor method, Ceram. Int., 32, 99, 10.1016/j.ceramint.2004.12.012 Khollam, 2002, A self-sustaining acid-base reaction in semi-aqueous media for synthesis of barium titanyl oxalate leading to BaTiO3 powders, Mater. Lett., 55, 175, 10.1016/S0167-577X(01)00642-5 Kumazawa, 1996, Preparation of barium titanate ultrafine particles from amorphous titania by a hydrothermal method and specific dielectric constants of sintered discs of the prepared particles, J. Mater. Sci., 31, 2599, 10.1007/BF00687288 Begg, 1994, Effect of particle size on the room-temperature crystal structure of barium titanate, J. Am. Ceram. Soc., 77, 3186, 10.1111/j.1151-2916.1994.tb04568.x Sun, 2006, Microwave-hydrothermal synthesis of tetragonal BaTiO3 under various conditions, Mater. Chem. Physics, 97, 481, 10.1016/j.matchemphys.2005.08.051 Hakuta, 2005, Effect of water density on polymorph of BaTiO3 nanoparticles synthesized under sub and super critical water conditions, Mater. Lett., 59, 1387, 10.1016/j.matlet.2004.11.063 Hakuta, 2005, Continuous production of BaTiO3 nanoparticles by hydrothermal synthesis, Ind. Eng. Chem. Res., 44, 840, 10.1021/ie049424i Matsui, 2008, Rapid synthesis of BaTiO3 nanoparticles in super critical water by continuous hydrothermal flow reactor system, J. Crys. Growth, 310, 2584, 10.1016/j.jcrysgro.2008.01.017 Hayashi, 2010, Hydrothermal synthesis of BaTiO3 nanoparticles using a super critical continuous flow reaction system, J. Crys. Growth, 312, 1968, 10.1016/j.jcrysgro.2010.03.034 Kozawa, 2009, Accelerated formation of barium titanate by solid-state reaction in water vapour atmosphere, J. Eur. Ceram. Soc., 29, 3259, 10.1016/j.jeurceramsoc.2009.05.031 Boulos, 2007, Hydrothermal synthesis of nanosized BaTiO3 powders and dielectric properties of corresponding ceramics, Solid State Ionics, 176, 1301, 10.1016/j.ssi.2005.02.024 Ciftci, 2001, Hydrothermal precipitation and characterization of nanocrystalline BaTiO3 particles, J. Mater. Sci., 36, 4875, 10.1023/A:1011828018247 Chen, 2004, Preparation of barium titanate ultrafine particles from rutile titania by a hydrothermal conversion, Powder Technol., 141, 69, 10.1016/j.powtec.2004.03.002 Kumazawa, 1996, Preparation of barium titanate ultrafine particles from amorphous titania by hydrothermal method and specific dielectric constants of sintered discs of the prepared particles, J. Mater. Sci., 31, 2599, 10.1007/BF00687288 Xu, 2002, Preparation and characterizations of tetragonal barium titanate powders by hydrothermal method, J. Eur. Ceram. Soc., 22, 1163, 10.1016/S0955-2219(01)00425-3 Danchevskaya, 2006, Thermovaporous synthesis of complicated oxides, J. Mater. Sci., 41, 1385, 10.1007/s10853-006-7411-0 Kholodkova, 2013, Study of nanocrystalline barium titanate formation in water vapour conditions, 66 Kholodkova, 2012, Investigation of fine-crystalline barium titanate synthesized in water fluid media, 547 K. Abe, M. Aoki, H. Rikimaru, T. Ito, K. Hidaka, K. Segawa, Process for producing a composition which includes perovskite compounds, US Patent #4,643,984 (1987). Eckert, 1996, Kinetics and mechanism of hydrothermal synthesis of barium titanate, J. Am. Ceram. Soc., 79, 2929, 10.1111/j.1151-2916.1996.tb08728.x Pinceloup, 1999, Hydrothermal synthesis of nanometer-sized barium titanate powders: control of barium/titanium ratio, sintering, and dielectric properties, J. Am. Ceram. Soc., 82, 3049, 10.1111/j.1151-2916.1999.tb02201.x Chen, 2008, Hydrothermal synthesis of BaTiO3: chrystal phase and Ba2+ ions leaching behavior in aqueous medium, Mater. Chem. Phys ., 110, 186, 10.1016/j.matchemphys.2008.01.031 Zhu, 2009, Effect of washing of barium titanate powders synthesized by hydrothermal method on their sinterability and piezoelectric properties, Ceram. Int., 35, 1947, 10.1016/j.ceramint.2008.10.018 Li, 2002, Dissolution and dispersion behavior of barium carbonate in aqueous suspensions, J. Am. Ceram. Soc., 85, 2977, 10.1111/j.1151-2916.2002.tb00566.x Zhu, 2009, Morphology and atomic-scale surface structure of barium titanatenanocrystals formed at hydrothermal conditions, J. Crys. Growth, 311, 2437, 10.1016/j.jcrysgro.2009.02.016 Pinceloup, 1999, Evidence of dissolution-precipitation mechanism in hydrothermal synthesis of barium titanate powders, J. Eur. Ceram. Soc., 19, 973, 10.1016/S0955-2219(98)00356-2 Yan, 2006, Size dependence on the ferroelectric transition of nanosized BaTiO3 particles, Maters. Chem. Phys., 98, 450, 10.1016/j.matchemphys.2005.09.058 Buscaglia, 2006, Grain size and grain boundary-related effects on the properties of nanocrystalline barium titanate ceramics, J. Euro. Ceram. Soc., 26, 2889, 10.1016/j.jeurceramsoc.2006.02.005 Zhao, 2004, Grain-size effect on the ferroelectric behavior of dencenanocrystalline BaTiO3 ceramics, Phys. Rev. B, 70, 024107, 10.1103/PhysRevB.70.024107 Luan, 2004, Fabrication and characteristics of fine-grained BaTiO3 ceramics by spark plasma sintering, Ceram. Int., 30, 405, 10.1016/S0272-8842(03)00124-X Yoon, 2011, Spark plasma sintering of nanocrystalline BaTiO3-powders: consolidation behavior and dielectric characteristics, J. Eur. Ceram. Soc., 31, 1723, 10.1016/j.jeurceramsoc.2011.03.035