Synthesis and high-temperature oxidation of a polymer-derived Mo-SiN based ceramic composite

Iizuka, 2002, Microstructures and properties of Mo5Si3 particle reinforced Si3N4 matrix composites, J. Am. Ceram. Soc., 85, 954, 10.1111/j.1151-2916.2002.tb00198.x Klemm, 2001, Silicon nitride/molybdenum disilicide composite with superior long-term oxidation resistance at 1500°C, J. Am. Ceram. Soc., 84, 2430, 10.1111/j.1151-2916.2001.tb01027.x Klemm, 2010, Silicon nitride for high-temperature applications, J. Am. Ceram. Soc., 93, 1501, 10.1111/j.1551-2916.2010.03839.x Petrovic, 1999, Key developments in high temperature structural silicides, Mater. Sci. Eng. A, 261, 1, 10.1016/S0921-5093(98)01043-0 Schneibel, 2004, Controlling the thermal expansion anisotropy of Mo5Si3 and Ti5Si3 silicides, Intermetallics, 12, 845, 10.1016/j.intermet.2004.02.035 Natesan, 2000, Oxidation behavior of molybdenum silicides and their composites, Intermetallics, 8, 1147, 10.1016/S0966-9795(00)00060-1 Iizuka, 2004, Oxidation mechanism of Mo5Si3 particle in Si3N4 matrix composite at 750°C, Mater. Sci. Eng., A366, 10, 10.1016/j.msea.2003.09.056 Meyer, 1996, Oxidation behavior of boron-modified Mo5Si3 at 800–1300°C, J. Am. Ceram. Soc., 79, 938, 10.1111/j.1151-2916.1996.tb08528.x Klemm, 1996, Influence of molybdenum silicide additions on high-temperature oxidation resistance of silicon nitride materials, J. Am. Ceram. Soc., 79, 2429, 10.1111/j.1151-2916.1996.tb08993.x Bartlett, 1998, Elevated temperature mechanical properties of MoSi2/Si3N4, MoSi2/SiC composites produced by self-propagating high temperature synthesis, Mater. Sci., 33, 1653, 10.1023/A:1017536408913 Suryanarayana, 2011, Synthesis of nanocomposites by mechanical alloying, J. Alloys Compd., 509S, S229, 10.1016/j.jallcom.2010.09.063 Colombo, 2010, Polymer-derived ceramics: 40 years of research and innovation in advanced ceramics, J. Am. Ceram. Soc., 93, 1805 Greil, 1995, Active-filler-controlled pyrolysis of preceramic polymers, J. Am. Ceram. Soc., 78, 835, 10.1111/j.1151-2916.1995.tb08404.x Riedel, 2006, Silicon-based polymer-derived ceramics: synthesis properties and applications—a review, J. Ceram. Soc. Jpn., 114, 425, 10.2109/jcersj.114.425 Seifert, 2014, Multiphase ceramic composites derived by reaction of Nb with SiCN precursors, J. Eur. Ceram. Soc., 34, 1913, 10.1016/j.jeurceramsoc.2014.01.036 Seifert, 2015, Nb(Si,C,N) composite materials densified by spark plasma sintering, J. Eur. Ceram. Soc., 35, 3319, 10.1016/j.jeurceramsoc.2015.02.005 Günthner, 2009, Advanced coatings on the basis of Si(C)N precursors for protection of steel against oxidation, J. Europ. Ceram. Soc., 29, 2061, 10.1016/j.jeurceramsoc.2008.11.013 Bauer, 2005, Preparation of moisture curable polysilazane coatings: part I. Elucidation of low temperature curing kinetics by FT-IR spectroscopy, Prog. Org. Coat., 53, 183, 10.1016/j.porgcoat.2005.02.006 Günthner, 2012, Conversion behaviour and resulting mechanical properties of polysilazane-based coatings, J. Eur. Ceram. Soc., 32, 1883, 10.1016/j.jeurceramsoc.2011.09.005 Schuster, 1988, Silicon nitride-metal joints: phase equilibria in the systems Si3N4-Cr, Mo, W and Re, J. Mater. Sci., 23, 2792, 10.1007/BF00547452