Synthesis and electrochemical properties of Li (Ni0.56Co0.19Mn0.24Al0.01)1-yAlyO2 as cathode material for lithium-ion batteries

Sun X, Si W, Liu X et al (2014) Multifunctional Ni/NiO hybrid nano membranes as anode materials for high-rate Li-ion batteries. Nano Energy 9:168–175

Sun X, Wang X, Qiao L et al (2012) Electrochemical behaviors of porous SnO2-Sn/C composites derived from pyrolysis of SnO2/poly (vinylidene fluoride). Electrochim Acta 66:204–209

Li X, Cheng F, Guo B, Chen J (2005) Template-synthesized LiCoO2, LiMn2O4, and LiNi0.8Co0.2O2 nanotubes as the cathode materials of lithium ion batteries. J Phys Chem B 109:14017–14024

Meng X, Han B, Wang Y, Nan J (2016) Effects of samarium doping on the electrochemical performance of LiFePO4/C cathode material for lithium-ion batteries. Ceram Int 42:2599–2604

Dahn JR, Sacken U, Michal CA (1990) Structure and electrochemistry of Li1±yNiO2 and a new Li2NiO2 phase with the Ni(OH)2 structure. Solid State Ionics 44:87–97

Sekizawa O, Hasegawa T, Kitamura N, Idemoto Y (2011) Crystal and electronic structure change determined by various method for delithiation process of Lix(Ni,Mn)O2-based cathode material. J Power Sources 196:6651–6656

Mukai K, Sugiyama J, Ikedo Y et al (2007) Microscopic magnetism in lithium insertion materials of LiNi1-xCoxO2 (x=0, 1/4, 1/2, 3/4, and 1). J Power Sources 174:843–846

Xiao L, Yang Y, Zhao Y, Ai X, Yang H, Cao Y (2008) Synthesis and electrochemical properties of submicron LiNi0.8Co0.2O2 by a polymer-pyrolysis method. Electrochim Acta 53:3007–3012

Liu Z, Zhen H, Kim Y, Liang C (2011) Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level. J Power Sources 196:10201–10206

Kim JM, Chung HT (2004) Role of transition metals in layered Li[Ni,Co,Mn]O2 under electrochemical operation. Electrochim Acta 49:3573–3580

Tsai YW, Lee JF, Liu DG, Hwang BJ (2004) In-situ X-ray absorption spectroscopy investigations of a layered LiNi0.65Co0.25Mn0.1O2 cathode material for rechargeable lithium batteries. J Mater Chem 14:958–965

Ngala JK, Chernova NA, Ma M, Mamak M, Zavalij PY, Whittingham MS (2004) The synthesis, characterization and electrochemical behavior of the layered LiNi0.4Mn0.4Co0.2O2 compound. J Mater Chem 14:214–220

Park BC, Bang HJ, Yoon CS, Myung ST, Prakash J, Sun YK (2007) Structural transformation of Li[Ni0.5−x Co2x Mn0.5−x ]O2 (2x≤0.1) charged in high-voltage range (4.5 V). J Electrochem Soc 154:520–526

Sun YK, Kang HB, Myung ST, Prakash J (2010) Effect of manganese content on the electrochemical and thermal stabilities of Li[Ni0.58Co0.28−x Mn0.14+x ]O2 cathode materials for lithium-ion batteries. J Electrochem Soc 157:1335–1340

Hwang BJ, Tsai YW, Chen CH, Santhanam R (2003) Influence of Mn content on the morphology and electrochemical performance of LiNi1−x−yCoxMnyO2 cathode materials. J Mater Chem 13:1962–1968

Lee SW, Kim H, Kim MS et al (2016) Improved electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode material synthesized by citric acid assisted sol-gel method for lithium ion batteries. J Power Sources 315:261–268

Liu XH, Kou LQ, Shi T, Liu K, Chen L (2014) Excellent high rate capability and high voltage cycling stability of Y2O3-coated LiNi0.5Co0.2Mn0.3O2. J Power Sources 267:874–880

Ruan Z, Zhu Y, Teng X (2016) Effect of pre-thermal treatment on the lithium storage performance of LiNi0.8Co0.15Al0.05O2. J Mater Sci 51:1400–1408

Zhou F, Qiu K, Peng G, Li X (2015) Silver/carbon nanotube hybrids: a novel conductive network for high-rate lithium ion batteries. Electrochim Acta 151:16–20

Liu T, Zhao SX, Wang K, Nan CW (2012a) CuO-coated Li[Ni0.5Co0.2Mn0.3]O2 cathode material with improved cycling performance at high rates. Electrochim Acta 85:605–611

Kang S, Qin H, Fang Y, Li X, Wang Y (2014) Preparation and electrochemical performance of yttrium-doped Li[Li0.20Mn0.534Ni0.133Co0.133]O2 as cathode material for lithium-ion batteries. Electrochim Acta 144:22–30

Valanarasu S, Chandramohan R, Somasundaram RM, Srikumar RS (2011) Structural and electrochemical properties of Eu-doped LiCoO2. J Mater Sci Mater Electron 22:151–157

Park CW, Kim SH, Nahm KS, Chung HT, Lee YS, Lee JH, Boo S, Kim J (2008) Structural and electrochemical study of Li[CrxLi(1-x)/3Mn2(1-x)/3]O2 (0≤x≤0.328) cathode materials. J Alloy Compd 449:343–348

Huang YH, Chou HL, Wang FM et al (2013) Synergy between experiment and simulation in describing the electrochemical performance of Mg-dopedLiNixCoyMnzO2 cathode material of lithium ion battery. J Electrochem Sci 8:8005–8009

Woo SW, Myung ST, Bang H, Kim DW, Sun YK (2009) Improvement of electro chemical and thermal properties of Li[Ni0.8Co0.1Mn0.1]O2 positive electrode materials by multiple metal(Al, Mg) substitution. Electrochim Acta 54:3851–3856

Ding Y, Zhang P, Long Z et al (2009) Morphology and electrochemical properties of Al doped LiNi1/3Co1/3Mn1/3O2 nanofibers prepared by electrospinning. J Alloy Compd 487:507–510

Gao Y, Yakovleva M, Ebner W (1998) Novel LiNi1-xTix/2Mgx/2O2 compounds as cathode materials for safer lithium-ion batteries. Electrochem Solid-State Lett 1:117–119

Zhang L, Jin K, Wang L, Zhang Y, Li X, Song Y (2015a) High capacity Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials synthesized using mesocrystal precursors for lithium-ion batteries. J Alloy Compd 638:298–304

Liu Q, Du K, Guo H, Peng ZD, Cao YB, Hu GR (2013) Structural and electrochemical properties of Co-Mn-Mg multi-doped nickel based cathode materials LiNi0.9Co0.1-x[Mn1/2Mg1/2]xO2 for secondary lithium ion batteries. Electrochim Acta 90:350–357

Ohzuku T, Ueda A, Nagayama M (1993) Electrochemistry and structural chemistry of LiNiO2 (R3m) for 4 volt secondary lithium cells. J Electrochem Soc 140:1862–1870

Chen Y, Zhang Y, Chen B, Wang Z, Lu C (2014) An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating. J Power Sources 256:20–27

Hu S, Cheng G, Cheng M et al (2009) Cycle life improvement of ZrO2-coated spherical LiNi1/3Co1/3Mn1/3O2 cathode material for lithium ion batteries. J Power Sources 188:564–569

Liu W, Wang M, Gao XI, Zhang W, Chen J, Zhou H, Zhang X (2012b) Improvement of the high-temperature, high-voltage cycling performance of LiNi0.5Co0.2Mn0.3O2 cathode with TiO2 coating. J Alloy Compd 543:181–188

Yabuuchi N, Ohzuku T (2003) Novel lithium insertion material of LiCo1/3Ni1/3Mn1/302 for advanced lithium-ion batteries. J Power Sources 119-121:171–174

Wang M, Chen Y, Wu F et al (2010) Characterization of yttrium substituted LiNi0.33Mn0.33Co0.33O2 cathode material for lithium secondary cells. Electrochim Acta 55:8815–8820

Zheng J, Zhu D, Yang Y et al (2012) The effects of N-methyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide-based electrolyte on the electrochemical performance of high capacity cathode material Li[Li0.2Mn0.54Ni0.13Co0.13]O2. Electrochim Acta 59:14–22

Piskin B, Aydinol MK (2016) Development and characterization of layered Li(NixMnyCo1-x-y)O2 cathode materials for lithium ion batteries. Int J Hydrogen Energ 41:9852–9859

Zhang Z, Zhu SR, Huang JD, Yan CM (2015b) Acacia gum-assisted co-precipitating synthesis of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium ion batteries. Ionics 22:621–627

Jeong-Hun J, Ryu K-S (2011) Synthesis and electrochemical performance of Li(Ni0.8Co0.15Al0.05)0.8(Ni0.5Mn0.5)0.2O2 with core–shell structure as cathode material for Li-ion batteries. J Alloy Compd 509:7985–7992