Syngas to higher alcohols synthesis over 3D printed KMoCo/ZSM5 monolith

Subramani, 2008, A review of recent literature to search for an efficient catalytic process for the conversion of syngas to ethanol, Energy Fuels, 22, 814, 10.1021/ef700411x P.L. Spath, and Dayton, D C. Mon, Preliminary Screening – Technical and Economic Assessment of Synthesis Gas to Fuels and Chemicals with Emphasis on the Potential for Biomass-Derived Syngas, in, 2003. Moulijn, 2013, Monolithic reactors in catalysis: excellent control, Curr. Opin. Chem. Eng., 2, 346, 10.1016/j.coche.2013.05.003 W. Liu, Ministructured Catalyst Bed for Gas–Liquid–Solid Multiphase Catalytic Reaction, 48 (2002) 1519-1532. Kreutzer, 2006, Shouldn't catalysts shape up? Structured reactors in general and gas–liquid monolith reactors in particular, Catal. Today, 111, 111, 10.1016/j.cattod.2005.10.014 Pangarkar, 2008, Structured packings for multiphase catalytic reactors, Ind. Eng. Chem. Res., 47, 3720, 10.1021/ie800067r Couck, 2017, CO2, CH4 and N2 separation with a 3DFD-printed ZSM-5 monolith, Chem. Eng. J., 308, 719, 10.1016/j.cej.2016.09.046 M. Konarova, W. Aslam, L. Ge, Q. Ma, F. Tang, V. Rudolph, J.N. Beltramini, Enabling Process Intensification by 3D Printing of Catalytic Structures, 9 (2017) 4132-4138. Parra-Cabrera, 2018, 3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors, Chem. Soc. Rev., 47, 209, 10.1039/C7CS00631D E.B. Duoss, M. Twardowski, J.A. Lewis, Sol-Gel Inks for Direct-Write Assembly of Functional Oxides, 19 (2007) 3485-3489. Pérez-Ramírez, 2008, Hierarchical zeolites: enhanced utilisation of microporous crystals in catalysis by advances in materials design, Chem. Soc. Rev., 37, 2530, 10.1039/b809030k Phung, 2015, Tuning of product selectivity in the conversion of ethanol to hydrocarbons over H-ZSM-5 based zeolite catalysts, Fuel Process. Technol., 137, 290, 10.1016/j.fuproc.2015.03.012 Corma, 2003, A zeolite with interconnected 8-, 10- and 12-ring pores and its unique catalytic selectivity, Nat. Mater., 2, 493, 10.1038/nmat921 Burkett, 1995, Mechanisms of structure direction in the synthesis of pure-silica zeolites. 1. Synthesis of TPA/Si-ZSM-5, Chem. Mater., 7, 920, 10.1021/cm00053a017 Zhang, 2016, Innovations in hierarchical zeolite synthesis, Catal. Today, 264, 3, 10.1016/j.cattod.2015.08.012 Slaa, 1992, The synthesis of higher alcohols using modified Cu/ZnO/Al2O3 catalysts, Catal. Today, 15, 129, 10.1016/0920-5861(92)80125-7 Zhang, 2010, Plasma-assisted preparation of Fe–Cu bimetal catalyst for higher alcohols synthesis from carbon monoxide hydrogenation, Fuel, 89, 3127, 10.1016/j.fuel.2010.04.014 Konarova, 2014, Nano- and microscale engineering of the molybdenum disulfide-based catalysts for syngas to ethanol conversion, ChemCatChem, 6, 2394, 10.1002/cctc.201402067 Luk, 2017, Status and prospects in higher alcohols synthesis from syngas, Chem. Soc. Rev., 46, 1358, 10.1039/C6CS00324A Xiang, 2008, Synthesis of higher alcohols from syngas over Fischer–Tropsch elements modified K/β-Mo2C catalysts, Fuel, 87, 599, 10.1016/j.fuel.2007.01.041 Xiang, 2007, K/Fe/β-Mo2C: a novel catalyst for mixed alcohols synthesis from carbon monoxide hydrogenation, Catal. Commun., 8, 88, 10.1016/j.catcom.2006.05.036 Zhu, 2018, Toward digitally controlled catalyst architectures: hierarchical nanoporous gold via 3D printing, Sci. Adv., 4, eaas9459, 10.1126/sciadv.aas9459 Manzano, 2017, Direct 3D printing of catalytically active structures, ACS Catal., 7, 7567, 10.1021/acscatal.7b02111 Michorczyk, 2016, Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane, J. Mater.Chem. A, 4, 18753, 10.1039/C6TA08629B Zhang, 2019, Hierarchical nanoporous copper architectures via 3D printing technique for highly efficient catalysts, Small, 15 Nash, 2016, Mixed alcohol dehydration over Brønsted and Lewis acidic catalysts, Appl. Catal. A, 510, 110, 10.1016/j.apcata.2015.11.019 Konarova, 2020, Enabling compact GTL by 3D-printing of structured catalysts, Results Eng., 6, 10.1016/j.rineng.2020.100127 Konarova, 2017, Enabling process intensification by 3D printing of catalytic structures, ChemCatChem, 9, 4132, 10.1002/cctc.201700829 Fogler, 1999