Synergistic enhanced thermal conductivity of polydimethylsiloxane composites via introducing SCF and hetero-structured GB@rGO hybrid fillers
Tóm tắt
With the fast development of high integration of electronic devices, the problem of heat accumulation has become increasingly prominent. The demand for thermal interface materials (TIMs) with high thermal conductivity (λ) is increasing for effectively solving the problem of heat transfer between heat source and heat sink. In this work, we report a short carbon fiber/glass bubble coated reduced graphite oxide/polydimethylsiloxane (SCF/GB@rGO/PDMS) composite with outstanding comprehensive performances fabricated by spatial confining forced network assembly method (SCFNA). Based on our earlier experience, we select a constant content of 30 wt% SCFS, while the GB@rGO contents altered from 0 to 6 wt% to investigate its effect on thermal conductivity enhancement. The λ of SCF(30 wt%)/GB@rGO(1 wt%)/PDMS composite with 0.1-mm thickness can reach 23.415 W/m·K, which is 85.72 times higher than pure PDMS. In addition, the PDMS composites also have superior electrical conductivity (1330 S/m) and excellent mechanical properties (~ 90% elongation at break, and bend, twist, fold available). In the TIM tests, compared with commercial thermal grease, our composite sample presented obviously higher heat transfer capacity. Overall, our PDMS composites are of great prospect as a flexible TIM with ultrahigh thermal conductivity for the highly efficient elimination of heat from electronic equipment. SCF/GB@rGO/PDMS composites with excellent thermal conductivity and superior mechanical flexibility were prepared by spatial confining forced network assembly.
Tài liệu tham khảo
Zhang X et al (2021) Highly thermally conductive and electrically insulating polydimethylsiloxane composites prepared by ultrasonic-assisted forced infiltration for thermal management applications. Compos Part B Eng 224
Zhang X et al (2021) Influence of rigid particles on thermal conductivity enhancement of polydimethylsiloxane composite during spatial confining forced network assembly. J Appl Polym Sci
Sun J et al (2021) The contribution of conductive network conversion in thermal conductivity enhancement of polymer composite: a theoretical and experimental study. ES Mater Manuf
Zhuang J et al (2021) Multi-factor analysis on thermal conductive property of metal-polymer composite microstructure heat exchanger. Adv Compos Hybrid Mater 4(1):27–35
Zhang S et al (2018) Improving the flame resistance and thermal conductivity of ethylene-vinyl acetate composites by incorporating hexachlorocyclotriphosphazene-modified graphite and carbon nanotubes. Polym Compos 39(S2):E891–E901
Zhang H et al (2020) Thermal conductivity enhancement via conductive network conversion from “sand-like” to “stone-like” in the polydimethylsiloxane composites. Compos Commun 100509
Liu H et al (2021) Water management simulation of proton exchange membrane fuel cells with micro-ribs based on volume of fluid model. ES Energy Environ
Yang X et al (2018) Self-healing, recoverable epoxy elastomers and their composites with desirable thermal conductivities by incorporating BN fillers via in-situ polymerization. Compos Sci Technol 164:59–64
Zhou Y et al (2020) Recent advances in thermal interface materials. ES Mater Manuf 7:4–24
Xu Y, Wang X, Hao Q (2021) A mini review on thermally conductive polymers and polymer-based composites. Compos Commun 24:100617
Dai W et al (2019) A paper-like inorganic thermal interface material composed of hierarchically structured graphene/silicon carbide nanorods. ACS Nano
Du Y et al (2021) Efficient construction and online evaluation of conductive networks within polydimethylsiloxane composites via continuous SCFNA method. Compos Commun 24:100673
Wang S et al (2020) Optimal analysis for thermal conductivity variation of EVA/SCF composites prepared by spatial confining forced network assembly. Mater Today Commun 25:101206
Zhang X (2020) Applications of kinetic methods in thermal analysis: a review. Eng Sci
Kashfipour MA et al (2020) Regulating intermolecular chain interaction of biopolymer with natural polyol for flexible, optically transparent and thermally conductive hybrids. Eng Sci
Tu J et al (2019) Latent heat and thermal conductivity enhancements in polyethylene glycol/polyethylene glycol-grafted graphene oxide composites. Adv Compos Hybrid Mater 2(3):471–480
Pan D et al (2021) Ice template method assists in obtaining carbonized cellulose/boron nitride aerogel with 3D spatial network structure to enhance the thermal conductivity and flame retardancy of epoxy-based composites. Adv Compos Hybrid Mater
Song N et al (2017) Highly anisotropic thermal conductivity of layer-by-layer assembled nanofibrillated cellulose/graphene nanosheets hybrid films for thermal management. ACS Appl Mater Interfaces 9(3):2924–2932
He X et al (2021) A mini review on factors affecting network in thermally enhanced polymer composites: filler content, shape, size, and tailoring methods. Adv Compos Hybrid Mater
Fu H et al (2020) Overview of injection molding technology for processing polymers and their composites. ES Mater Manuf
Li L et al (2020) Sub-picosecond optical response of metals due to non-thermalized electron dynamics. ES Energy Environ
Wang J et al (2021) Preparation of flexible and elastic thermal conductive nanocomposites via ultrasonic-assisted forced infiltration. Compos Sci Technol 202:108582
Sun J et al (2019) Development and application of hot embossing in polymer processing: a review. ES Mater Manuf
Su F et al (2019) Efficient preparation of PDMS-based conductive composites using self-designed automatic equipment and an application example. J Polym Eng 39(10):892–901
Kan A et al (2020) Numerical simulation and experimental investigation on thermal bridge effect of vacuum insulation panel with cavities. ES Energy Environ
Si WY et al (2020) Enhancing thermal conductivity via conductive network conversion from high to low thermal dissipation in polydimethylsiloxane composites. J Mater Chem C 8(10):3463–3475
Zhuang Y et al (2020) Flexible graphene nanocomposites with simultaneous highly anisotropic thermal and electrical conductivities prepared by engineered graphene with flat morphology. ACS Nano 14(9):11733–11742
Hao Q, Garg J (2021) A review on phonon transport within polycrystalline materials. ES Mater Manuf
Hou X et al (2021) Aluminum borate/boron nitride nanosheet fibers for enhancing the thermal conductivity of polymer composites. ACS Appl Nano Mater 4(2):2136–2142
Zou R et al (2020) Graphene/graphitized polydopamine/carbon nanotube all-carbon ternary composite films with improved mechanical properties and through-plane thermal conductivity. ACS Appl Mater Interfaces 12(51):57391–57400
Xia Y et al (2020) Multielement synergetic effect of boron nitride and multiwalled carbon nanotubes for the fabrication of novel shape-stabilized phase-change composites with enhanced thermal conductivity. ACS Appl Mater Interfaces 12(37):41398–41409
Gai C et al (2021) Scalable fabrication of flexible single-layer strain and double-layer pressure sensors by inkjet printing for subtle vibration detection. Adv Mater Interfaces 8(13):2100632
Gao X et al (2021) Spatial pattern analysis reveals multiple sources of organophosphorus flame retardants in coastal waters. J Hazard Mater 417:125882
Chang-Jian C-W et al (2018) Thermally conductive polymeric composites incorporating 3D MWCNT/PEDOT:PSS scaffolds. Compos B Eng 136:46–54
Yang TT et al (2021) Welding dopamine modified graphene nanosheets onto graphene foam for high thermal conductive composites. Compos Part B Eng 205
Ma T et al (2020) Highly thermal conductivities, excellent mechanical robustness and flexibility, and outstanding thermal stabilities of aramid nanofiber composite papers with nacre-mimetic layered structures. ACS Appl Mater Interfaces 12(1):1677–1686
Lu X et al (2020) Polyethylene glycol/carbon black shape-stable phase change composites for peak load regulating of electric power system and corresponding thermal energy storage. Eng Sci
Xu T et al (2019) Three-dimensional carbon fiber-graphene network for improved thermal conductive properties of polyamide-imide composites. Compos Part B Eng 178
Wei JM et al (2020) Enhanced thermal conductivity of polydimethylsiloxane composites with carbon fiber. Compos Commun 17:141–146
Zhang H et al (2020) Recent advances in preparation, mechanisms, and applications of thermally conductive polymer composites: a review. J Compos Sci 4(4):180
Guo Y et al (2020) Factors affecting thermal conductivities of the polymers and polymer composites: a review. Compos Sci Technol 193
Alshehri H et al (2020) High-temperature solar thermal energy conversion enhanced by spectrally-selective metafilm absorber under concentrated solar irradiation. ES Energy Environ
Hou X et al (2019) High-thermal-transport-channel construction within flexible composites via the welding of boron nitride nanosheets. ACS Appl Nano Mater 2(1):360–368
Chen X et al (2020) Salt template assisted BN scaffold fabrication toward highly thermally conductive epoxy composites. ACS Appl Mater Interfaces 12(14):16987–16996
Zhao Y et al (2018) Ultrasonic processing of MWCNT nanopaper reinforced polymeric nanocomposites. Polymer 156:85–94
Sun J et al (2018) Highly stretchable and ultrathin nanopaper composites for epidermal strain sensors. Nanotechnology 29(35)
Zhang D et al (2020) Overview of ultrasonic assisted manufacturing multifunctional carbon nanotube nanopaper based polymer nanocomposites. Eng Sci 10:35–50
Sun J et al (2019) Highly elastic and ultrathin nanopaper-based nanocomposites with superior electric and thermal characteristics. J Mater Sci 54(11):8436–8449
Weng Z et al (2018) Fabrication of high thermal conductive shape-stabilized polyethylene glycol/silica phase change composite by two-step sol gel method. Compos A Appl Sci Manuf 110:106–112
He X et al (2018) Improved thermal conductivity of polydimethylsiloxane/short carbon fiber composites prepared by spatial confining forced network assembly. J Mater Sci 53(20):14299–14310
Wu D et al (2017) Spatial Confining Forced Network Assembly for preparation of high-performance conductive polymeric composites. Compos A Appl Sci Manuf 102:88–95
He X et al (2019) Enhancing thermal conductivity of polydimethylsiloxane composites through spatially confined network of hybrid fillers. Compos Sci Technol 172:163–171
Zhao J et al (2017) Synthesis of thermally reduced graphite oxide in sulfuric acid and its application as an efficient lubrication additive. Tribol Int 116:303–309
Huang T et al (2019) Improvement in dielectric constant of carbon black/epoxy composites with separated structure by surface-modified hollow glass beads with reduced graphene oxide. Compos Sci Technol 176:46–53
Shi X et al (2021) Improvement of thermal conductivities and simulation model for glass fabrics reinforced epoxy laminated composites via introducing hetero-structured BNN-30@BNNS fillers. J Mater Sci Technol 82:239–249
Khan M et al (2014) Pulicaria glutinosa plant extract: a green and eco-friendly reducing agent for the preparation of highly reduced graphene oxide. RSC Adv 4(46):24119–24125
Oliveira AEF et al (2018) Thermally reduced graphene oxide: synthesis, studies and characterization. J Mater Sci 53(17):12005–12015
Tang C et al (2018) Phonon thermal transport properties of graphene periodically embedded with four- and eight-membered rings: a molecular dynamics study. ES Mater Manuf
Konios D et al (2014) Dispersion behaviour of graphene oxide and reduced graphene oxide. J Colloid Interface Sci 430:108–112
Liang C et al (2019) Superior electromagnetic interference shielding 3D graphene nanoplatelets/reduced graphene oxide foam/epoxy nanocomposites with high thermal conductivity. J Mater Chem C 7(9):2725–2733
Li Y et al (2020) Incorporating Ag nanowires into graphene nanosheets for enhanced thermal conductivity: implications for thermal management. ACS Appl Nano Mater 3(6):6061–6070
Shi PC et al (2018) Large-scale production of high-quality graphene sheets by a non-electrified electrochemical exfoliation method. Carbon 126:507–513
Hsieh CT et al (2015) Thermal conductivity from hierarchical heat sinks using carbon nanotubes and graphene nanosheets. Nanoscale 7(44):18663–18670
Chen Q et al (2021) Small-nanostructure-size-limited phonon transport within composite films made of single-wall carbon nanotubes and reduced graphene oxides. ACS Appl Mater Interfaces 13(4):5435–5444