Sustainable design guidelines for detached housing in the Lebanese inland region

Altan, 2009, An internal assessment of the thermal comfort and daylighting conditions of a naturally ventilated building with an active glazed facade in a temperate climate, Energy and Buildings, 41, 36, 10.1016/j.enbuild.2008.07.009 Autodesk, Inc. 2010. Autodesk® Ecotect™ Analysis. Online. Awwad, E., Hamad, B., Mabsout, M., Khatib, H., 2010. Sustainable construction material using hemp fibers – preliminary study. In: Proceedings of Second International Conference on Sustainable Construction Materials and Technologies, Ancona. Bostancioglu, 2010, Effect of building shape on a residential building’s construction, energy and life cycle costs, Architectural Science Review, 53, 441, 10.3763/asre.2009.0040 Bakker, 2005, Performance and costs of a roof-sized PV/thermal array combined with a ground coupled heat pump, Solar Energy, 78, 331, 10.1016/j.solener.2004.09.019 Chedid, 2001, Policy analysis of greenhouse gas emissions: the case of the lebanese electricity sector, Energy Conversion and Management, 42, 373, 10.1016/S0196-8904(00)00060-1 Chedid, 2004, Assessment of Energy Efficiency Options in the Building Sector of Lebanon, Energy Policy, 32, 647, 10.1016/S0301-4215(02)00328-2 Dixit, 2010, Identification of parameters for embodied energy measurement: a literature review, Energy and Buildings, 42, 1238, 10.1016/j.enbuild.2010.02.016 Ghaddar, 1998, Energy conservation of residential buildings in Beirut, Fuel and Energy Abstracts, 39, 402, 10.1016/S0140-6701(98)94333-8 Hamad, 2000, Geology and location of major coarse aggregate resources in Lebanon, Eastern Mediterranean, Bulletin of Engineering Geology and the Environment, 58, 183, 10.1007/s100640050074 Hammond, 2011 Hatamipour, 2007, Evaluation of existing cooling systems for reducing cooling power consumption, Energy and Buildings, 39, 105, 10.1016/j.enbuild.2006.05.007 Hirano, 2006, A study on a porous residential building model in hot and humid regions part 2—reducing the cooling load by component-scale voids and the CO2 emission reduction effect of the building model, Building and Environment, 41, 33, 10.1016/j.buildenv.2005.01.016 Houri, 2005, Residential energy consumption patterns: the case of Lebanon, International Journal of Energy Research, 29, 755, 10.1002/er.1086 Huberman, 2008, A life-cycle energy analysis of building materials in the Negev Desert, Energy and Buildings, 40, 837, 10.1016/j.enbuild.2007.06.002 Karaki, S., Chaaban, F., Chedid, R., Mezher, T., Harb, A., Abdulla, A., Hamzeh, A., Yahia, A., 2005. Electric energy access in Jordan, Lebanon and Syria. In: Proceedings of International Conference on Energy Research and Development (ICERD-3), Kuwait. Kubota, 2009, The effects of night ventilation technique on indoor thermal environment for residential buildings in hot-humid climate of Malaysia, Energy and Buildings, 41, 829, 10.1016/j.enbuild.2009.03.008 Leckner, 2011, Life cycle cost and energy analysis of a net zero energy house with solar combisystem, Applied Energy, 88, 232, 10.1016/j.apenergy.2010.07.031 Li, 2006, Properties of hemp fibre reinforced concrete composites, Composites Part A: Applied Science and Manufacturing, 37, 497, 10.1016/j.compositesa.2005.01.032 Morel, 2001, Building houses with local materials: means to drastically reduce the environmental impact of construction, Building and Environment, 36, 1119, 10.1016/S0360-1323(00)00054-8 Nowamooz, 2011, Finite element modelling of a rammed earth wall, Construction and Building Materials, 25, 2112, 10.1016/j.conbuildmat.2010.11.021 Rees, 2000, Qualitative comparison of North American and U.K. cooling load calculation methods, HVAC&R Research, 6, 77, 10.1080/10789669.2000.10391251 Republic of Lebanon Ministry of Public Works and Transport, 2005a. Energy Analysis and Economic Feasibility. UNDP/GEF, MPWT/DGU, pp. 63–65. Republic of Lebanon Ministry of Public Works and Transport, 2005b. Thermal Standard for Buildings in Lebanon. UNDP/GEF, MPWT/DGU, pp. 6. Sadafia, 2011, Evaluating thermal effects of internal courtyard in a tropical terrace house by computational simulation, Energy and Buildings, 43, 887, 10.1016/j.enbuild.2010.12.009 Shaviv, 2001, Thermal mass and night ventilation as passive cooling design strategy, Renewable Energy, 24, 445, 10.1016/S0960-1481(01)00027-1 Sukamongkol, 2010, Condenser heat recovery with a PV/T air heating collector to regenerate desiccant for reducing energy use of an air conditioning room, Energy and Buildings, 42, 315, 10.1016/j.enbuild.2009.09.009 Szalay, 2007, What is missing from the concept of the new European building directive?, Building and Environment, 42, 1761, 10.1016/j.buildenv.2005.12.003 Thormark, 2006, The effect of material choice on the total energy need and recycling potential of a building, Building and Environment, 41, 1019, 10.1016/j.buildenv.2005.04.026 Tripanagnostopoulosl, 2006, Performance, cost and life-cycle assessment study of hybrid PVT/AIR solar systems, Progress in Photovoltaics: Research and Applications, 14, 65, 10.1002/pip.634 Tuhus-Dubrow, 2010, Genetic-algorithm based approach to optimize building envelope design for residential buildings, Building and Environment, 45, 1574, 10.1016/j.buildenv.2010.01.005 Zhang, X., Zhao, X., Smith, S., 2012. Review of R&D progress and practical application of the solar photovoltaic/thermal (PV/T) technologies. Renewable and Sustainable Energy Reviews (0). Zondag, 2006