Sustainable Practice in Pavement Engineering through Value-Added Collective Recycling of Waste Plastic and Waste Tyre Rubber

Gigli, 2019, Cost-benefit analysis of a circular economy project: a study on a recycling system for end-of-life tyres, J Cleaner Prod, 229, 680, 10.1016/j.jclepro.2019.03.223

Muise, 2016, Attitudes to the recovery and recycling of agricultural plastics waste: a case study of Nova Scotia, Canada, Resour Conserv Recycl, 109, 137, 10.1016/j.resconrec.2016.02.011

Sharma, 2016, Sustainable bis-benzoxazines from cardanol and PET-derived terephthalamides, ACS Sustainable Chem Eng, 4, 1085, 10.1021/acssuschemeng.5b01153

Zhao, 2020, Recent applications of waste solid materials in pavement engineering, Waste Manag, 108, 78, 10.1016/j.wasman.2020.04.024

Li, 2019, Life cycle assessment and life cycle cost analysis of recycled solid waste materials in highway pavement: a review, J Cleaner Prod, 233, 1182, 10.1016/j.jclepro.2019.06.061

Mohammadinia, 2018, Mechanical behaviour and load bearing mechanism of high porosity permeable pavements utilizing recycled tire aggregates, Constr Build Mater, 168, 794, 10.1016/j.conbuildmat.2018.02.179

Cholake, 2017, Composite panels obtained from automotive waste plastics and agricultural macadamia shell waste, J Cleaner Prod, 151, 163, 10.1016/j.jclepro.2017.03.074

Xiao, 2018, An overview of China’s recyclable waste recycling and recommendations for integrated solutions, Resour Conserv Recycl, 134, 112, 10.1016/j.resconrec.2018.02.032

Sienkiewicz, 2017, Environmentally friendly polymer–rubber composites obtained from waste tyres: a review, J Cleaner Prod, 147, 560, 10.1016/j.jclepro.2017.01.121

Kawecki, 2018, Probabilistic material flow analysis of seven commodity plastics in Europe, Environ Sci Technol, 52, 9874, 10.1021/acs.est.8b01513

Kahlen, 2010, Aging behavior of polymeric solar absorber materials—part 1: engineering plastics, Sol Energy, 84, 1567, 10.1016/j.solener.2010.03.021

Padsalgikar, 2017, 3-Speciality plastics in cardiovascular applications, 53

Dahlbo, 2018, Recycling potential of post-consumer plastic packaging waste in Finland, Waste Manag, 71, 52, 10.1016/j.wasman.2017.10.033

Park, 2015, Evaluating localism in the management of post-consumer plastic bottles in Honolulu, Hawaii: perspectives from industrial ecology and political ecology, J Environ Manage, 154, 299, 10.1016/j.jenvman.2015.02.042

Geyer, 2017, Production, use, and fate of all plastics ever made, Sci Adv, 3, e1700782, 10.1126/sciadv.1700782

Association of Plastic Recyclers, the American Chemistry Council. United States national post-consumer plastic bottle recycling report. Washington, DC: Plastics Division of the Association of Plastic Recyclers and the American Chemistry Council; 2017.

Hosseinnezhad, 2019, Surface functionalization of rubber particles to reduce phase separation in rubberized asphalt for sustainable construction, J Cleaner Prod, 225, 82, 10.1016/j.jclepro.2019.03.219

Chen, 2019, Low temperature and fatigue characteristics of treated crumb rubber modified asphalt after a long term aging procedure, J Cleaner Prod, 234, 1262, 10.1016/j.jclepro.2019.06.147

Asgharzadeh, 2018, Fatigue properties of crumb rubber asphalt mixtures used in railways, Constr Build Mater, 184, 248, 10.1016/j.conbuildmat.2018.06.189

Paje, 2013, Road pavement rehabilitation using a binder with a high content of crumb rubber: influence on noise reduction, Constr Build Mater, 47, 789, 10.1016/j.conbuildmat.2013.05.008

Wang, 2012, Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber, Constr Build Mater, 26, 583, 10.1016/j.conbuildmat.2011.06.061

Baghaee Moghaddam, 2015, Stiffness modulus of polyethylene terephthalate modified asphalt mixture: a statistical analysis of the laboratory testing results, Mater Des, 68, 88, 10.1016/j.matdes.2014.11.044

Modarres, 2014, Effect of waste plastic bottles on the stiffness and fatigue properties of modified asphalt mixes, Mater Des, 61, 8, 10.1016/j.matdes.2014.04.046

Hassani, 2005, Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement, Waste Manag Res, 23, 322, 10.1177/0734242X05056739

Raheem, 2019, Current developments in chemical recycling of post-consumer polyethylene terephthalate wastes for new materials production: a review, J Cleaner Prod, 225, 1052, 10.1016/j.jclepro.2019.04.019

Liu, 2013, Isooctanol alcoholysis of waste polyethylene terephthalate in acidic ionic liquid, J Polym Res, 20, 310, 10.1007/s10965-013-0310-6

Sinha, 2010, PET waste management by chemical recycling: a review, J Polym Environ, 18, 8, 10.1007/s10924-008-0106-7

Khoonkari, 2015, Chemical recycling of PET wastes with different catalysts, Int J Polym Sci, 2015, 1, 10.1155/2015/124524

Carta, 2003, Chemical recycling of poly(ethylene terephthalate) (PET) by hydrolysis and glycolysis, Environ Sci Pollut Res Int, 10, 390, 10.1065/espr2001.12.104.8

Leng, 2018, Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt, J Cleaner Prod, 180, 682, 10.1016/j.jclepro.2018.01.171

Leng, 2018, Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP), J Cleaner Prod, 196, 615, 10.1016/j.jclepro.2018.06.119

Sreeram, 2018, Eco-friendly paving materials using waste PET and reclaimed asphalt pavement, HKIE Trans, 25, 237, 10.1080/1023697X.2018.1534617

Jin, 2020, Rheological properties and micro-characteristics of polyurethane composite modified asphalt, Construct Build Mater, 234, 10.1016/j.conbuildmat.2019.117395

Singh, 2019, Effect of polymer modification on the ageing properties of asphalt binders: chemical and morphological investigation, Constr Build Mater, 205, 633, 10.1016/j.conbuildmat.2019.02.050

Yu, 2016, Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives, Constr Build Mater, 125, 168, 10.1016/j.conbuildmat.2016.08.032

ASTM D4402-02. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM standard. West Conshohocken: ASTM International; 2015.

Hong Kong Special Administrative Region Government. Hong Kong observatory 2018 [Internet]. Hong Kong: Hong Kong Special Administrative Region Government; 2019 [cited 2020 May 10]. Available from: https://www.hko.gov.hk/en/abouthko/files/hko2018e.pdf.

Li, 2019, Preparation and characterization of waterborne epoxy modified bitumen emulsion as a potential high-performance cold binder, J Cleaner Prod, 235, 1265, 10.1016/j.jclepro.2019.06.267

ASTM D7175-15. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. ASTM standard. West Conshohocken: ASTM International; 2015.

ASTM D6521-19a. Standard practice for accelerated aging of asphalt binder using a pressurized aging vessel (PAV). ASTM standard. West Conshohocken: ASTM International; 2019.

Behnood, 2017, Stress-dependent behavior and rutting resistance of modified asphalt binders: an MSCR approach, Constr Build Mater, 157, 635, 10.1016/j.conbuildmat.2017.09.138

Dong, 2019, Chemical characteristics of bio-asphalt and its rheological properties after CR/SBS composite modification, Constr Build Mater, 200, 46, 10.1016/j.conbuildmat.2018.12.092

ASTM D2872-19. Standard test method for effect of heat and air on a moving film of asphalt (rolling thin-film oven test). ASTM standard. West Conshohocken: ASTM International; 2019.

Phiri, 2019, Effect of free foaming and pre-curing on the thermal, morphological and physical properties of reclaimed tyre rubber foam composites, J Cleaner Prod, 218, 665, 10.1016/j.jclepro.2019.02.051

Wang, 2018, Energy consumption and environmental impact of rubberized asphalt pavement, J Cleaner Prod, 180, 139, 10.1016/j.jclepro.2018.01.086

Yu, 2017, Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber, J Cleaner Prod, 141, 336, 10.1016/j.jclepro.2016.09.043

Zhou, 2019, Structure and thermal properties of various alcoholysis products from waste poly(ethylene terephthalate), Waste Manag, 85, 164, 10.1016/j.wasman.2018.12.032

Deleu, 2016, Waste PET (bottles) as a resource or substrate for MOF synthesis, J Mater Chem A Mater Energy Sustain, 4, 9519, 10.1039/C6TA02381A

AASHTO M 320. Standard specification for performance-graded asphalt binder. AASHTO standard. Washington, DC: American Association of State Highway and Transportation Officials; 2017.

AASHTO M 332. Standard specification for performance-graded asphalt binder using multiple stress creep recovery (MSCR) test. AASHTO standard. Washington, DC: American Association of State Highway and Transportation Officials; 2019.