Surgical Techniques for Total Knee Arthroplasty: Measured Resection, Gap Balancing, and Hybrid

Journal of the American Academy of Orthopaedic Surgeons, The - Tập 25 Số 7 - Trang 499-508 - 2017
Neil P. Sheth1, Adeel Husain1, Charles L. Nelson1
1the Department of Orthopaedic Surgery, University of Pennsylvania, Perelman School of Medicine, Philadelphia, PA (Dr. Sheth and Dr. Nelson), and the Department of Orthopedics, Kaiser Permanente-Southern California, Fontana, CA (Dr. Husain).

Tóm tắt

Total knee arthroplasty (TKA) is effective in managing end-stage degenerative joint disease. Achieving favorable clinical outcomes is predicated on proper implant alignment, sizing, and rotation as well as adequate soft-tissue balancing. Modern TKA implants are designed to address the fundamental needs of attaining stability in both flexion and extension and of optimizing patellar tracking. Measured resection and gap balancing are the two different techniques used to implant the TKA components used today. Both techniques have been validated as durable and successful, and each has unique advantages and disadvantages. A hybrid technique has been developed that combines the benefits of measured resection and gap balancing and minimizes the limitations associated with both techniques. This hybrid approach has the potential for achieving improved TKA kinematics and refined surgical technique.

Từ khóa


Tài liệu tham khảo

Daines, 2014, Gap balancing vs. measured resection technique in total knee arthroplasty, Clin Orthop Surg, 6, 1, 10.4055/cios.2014.6.1.1

Springer, 2014, Measured resection versus gap balancing for total knee arthroplasty, Clin Orthop Relat Res, 472, 2016, 10.1007/s11999-014-3524-y

Babazadeh, 2014, Gap balancing sacrifices joint-line maintenance to improve gap symmetry: A randomized controlled trial comparing gap balancing and measured resection, J Arthroplasty, 29, 950, 10.1016/j.arth.2013.09.036

Luyckx, 2012, Is adapted measured resection superior to gap-balancing in determining femoral component rotation in total knee replacement?, J Bone Joint Surg Br, 94, 1271, 10.1302/0301-620X.94B9.28670

Bourne, 2010, Patient satisfaction after total knee arthroplasty: Who is satisfied and who is not?, Clin Orthop Relat Res, 468, 57, 10.1007/s11999-009-1119-9

Hsu, 1990, Normal axial alignment of the lower extremity and load-bearing distribution at the knee, Clin Orthop Relat Res, 255, 215, 10.1097/00003086-199006000-00029

Insall, 1981, Technique of total knee replacement, Instr Course Lect, 30, 324

Hungerford, 2008, Measured resection: A valuable tool in TKA, Orthopedics, 31, 941, 10.3928/0147-7447-20050901-17

Hungerford, 1985, Total joint arthroplasty of the knee, Clin Orthop Relat Res, 192, 23, 10.1097/00003086-198501000-00004

Dorr, 1986, Technical considerations in total knee arthroplasty, Clin Orthop Relat Res, 205, 5, 10.1097/00003086-198604000-00003

Dennis, 2010, Gap balancing versus measured resection technique for total knee arthroplasty, Clin Orthop Relat Res, 468, 102, 10.1007/s11999-009-1112-3

Le, 2014, Current modes of failure in TKA: Infection, instability, and stiffness predominate, Clin Orthop Relat Res, 472, 2197, 10.1007/s11999-014-3540-y

Insall, 2002, Correlation between condylar lift-off and femoral component alignment, Clin Orthop Relat Res, 403, 143, 10.1097/00003086-200210000-00022

Figgie, 1989, The effect of alignment of the implant on fractures of the patella after condylar total knee arthroplasty, J Bone Joint Surg Am, 71, 1031, 10.2106/00004623-198971070-00009

Berger, 1993, Determining the rotational alignment of the femoral component in total knee arthroplasty using the epicondylar axis, Clin Orthop Relat Res, 286, 40, 10.1097/00003086-199301000-00008

Berger, 1998, Malrotation causing patellofemoral complications after total knee arthroplasty, Clin Orthop Relat Res, 356, 144, 10.1097/00003086-199811000-00021

Aglietti, 2008, Rotational position of femoral and tibial components in TKA using the femoral transepicondylar axis, Clin Orthop Relat Res, 466, 2751, 10.1007/s11999-008-0452-8

Lützner, 2010, Rotational alignment of the tibial component in total knee arthroplasty is better at the medial third of tibial tuberosity than at the medial border, BMC Musculoskelet Disord, 11, 57, 10.1186/1471-2474-11-57

Seah, 2012, Evaluation of the relationship between anteroposterior translation of a posterior cruciate ligament-retaining total knee replacement and functional outcome, J Bone Joint Surg Br, 94, 1362, 10.1302/0301-620X.94B10.28774

Whiteside, 1995, The anteroposterior axis for femoral rotational alignment in valgus total knee arthroplasty, Clin Orthop Relat Res, 321, 168

Schnurr, 2009, Is referencing the posterior condyles sufficient to achieve a rectangular flexion gap in total knee arthroplasty?, Int Orthop, 33, 1561, 10.1007/s00264-008-0656-2

Yau, 2007, How precise is the determination of rotational alignment of the femoral prosthesis in total knee arthroplasty: An in vivo study, J Arthroplasty, 22, 1042, 10.1016/j.arth.2006.12.043

Christensen, 2013, Soft tissue releases affect the femoral component rotation necessary to create a balanced flexion gap during total knee arthroplasty, J Arthroplasty, 28, 1528, 10.1016/j.arth.2013.01.008

Fehring, 2000, Rotational malalignment of the femoral component in total knee arthroplasty, Clin Orthop Relat Res, 380, 72, 10.1097/00003086-200011000-00010

Matsumoto, 2009, The intra-operative joint gap in cruciate-retaining compared with posterior-stabilised total knee replacement, J Bone Joint Surg Br, 91, 475, 10.1302/0301-620X.91B4.21862

Nagai, 2014, Soft tissue balance changes depending on joint distraction force in total knee arthroplasty, J Arthroplasty, 29, 520, 10.1016/j.arth.2013.07.025

Attfield, 1996, Soft-tissue balance and recovery of proprioception after total knee replacement, J Bone Joint Surg Br, 78, 540, 10.1302/0301-620X.78B4.0780540

Tigani, 2010, Comparison between two computer-assisted total knee arthroplasty: Gap-balancing versus measured resection technique, Knee Surg Sports Traumatol Arthrosc, 18, 1304, 10.1007/s00167-010-1124-2

Lee, 2010, Accuracy of soft tissue balancing in TKA: Comparison between navigation-assisted gap balancing and conventional measured resection, Knee Surg Sports Traumatol Arthrosc, 18, 381, 10.1007/s00167-009-0983-x

Martin, 1990, The influence of joint line position on knee stability after condylar knee arthroplasty, Clin Orthop Relat Res, 259, 146, 10.1097/00003086-199010000-00021

König, 2010, Joint line elevation in revision TKA leads to increased patellofemoral contact forces, J Orthop Res, 28, 1, 10.1002/jor.20952

Snider, 2009, The influence of the posterior cruciate ligament and component design on joint line position after primary total knee arthroplasty, J Arthroplasty, 24, 1093, 10.1016/j.arth.2008.08.009

Whiteside, 1999, Selective ligament release in total knee arthroplasty of the knee in valgus, Clin Orthop Relat Res, 367, 130, 10.1097/00003086-199910000-00016

Baldini, 2004, Flexion-extension gap changes during total knee arthroplasty: Effect of posterior cruciate ligament and posterior osteophytes removal, J Knee Surg, 17, 69, 10.1055/s-0030-1248201

Higuchi, 2009, Relationship between joint gap difference and range of motion in total knee arthroplasty: A prospective randomised study between different platforms, Int Orthop, 33, 997, 10.1007/s00264-009-0772-7

Peters, 2013, Lessons learned from selective soft-tissue release for gap balancing in primary total knee arthroplasty: An analysis of 1216 consecutive total knee arthroplasties. AAOS exhibit selection, J Bone Joint Surg Am, 95, e152, 10.2106/JBJS.L.01686

Thông tin
Thông tin xuất bản

Journal of the American Academy of Orthopaedic Surgeons, The

Tập 25 Số 7

499-508

Thông tin tác giả