Surface treatments of titanium dental implants for rapid osseointegration
Tóm tắt
Từ khóa
Tài liệu tham khảo
Albrektsson, 1981, Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man, Acta Orthop Scand, 52, 155, 10.3109/17453678108991776
Steinemann, 1998, Titanium-the material of choice?, Periodontology 2000, 17, 7, 10.1111/j.1600-0757.1998.tb00119.x
Buser, 2004, Enhanced bone apposition to a chemically modified SLA titanium surface, J Dent Res, 83, 529, 10.1177/154405910408300704
Zhao, 2005, High surface energy enhances cell response to titanium substrate microstructure, J Biomed Mater Res A, 74, 49, 10.1002/jbm.a.30320
Bagno, 2004, Surface treatments and roughness properties of Ti-based biomaterials, J Mater Sci Mater Med, 15, 935, 10.1023/B:JMSM.0000042679.28493.7f
Giavaresi, 2003, Mechanical and histomorphometric evaluations of titanium implants with different surface treatments inserted in sheep cortical bone, Biomaterials, 24, 1583, 10.1016/S0142-9612(02)00548-3
Carlsson, 1989, Bone response to plasma-cleaned titanium implants, Int J Oral Maxillofac Implants, 4, 199
Wennerberg, 1991, Glow discharge pre-treated implants combined with temporary bone ischaemia, Swed Dent J, 15, 95
Cochran, 1998, Bone response to unloaded and loaded titanium implants with a sandblasted and acid-etched surface: a histometric study in the canine mandible, J Biomed Mater Res, 40, 1, 10.1002/(SICI)1097-4636(199804)40:1<1::AID-JBM1>3.0.CO;2-Q
Wennerberg, 1998, A histomorphometric evaluation of screw-shaped implants each prepared with two surface roughnesses, Clin Oral Implants Res, 9, 11, 10.1034/j.1600-0501.1998.090102.x
Buser, 1991, Influence of surface characteristics on bone integration of titanium implants. A histomorphometric study in miniature pigs, J Biomed Mater Res, 25, 889, 10.1002/jbm.820250708
Gotfredsen, 1995, Anchorage of TiO2-blasted, HA-coated, and machined implants: an experimental study with rabbits, J Biomed Mater Res, 29, 1223, 10.1002/jbm.820291009
Wennerberg, 1996, Histomorphometric and removal torque study of screw-shaped titanium implants with three different surface topographies, Clin Oral Implant Res, 6, 24, 10.1034/j.1600-0501.1995.060103.x
Becker, 2000, A prospective multicenter clinical trial comparing one- and two-stage titanium screw-shaped fixtures with one-stage plasma-sprayed solid-screw fixtures, Clin Implant Dent Relat Res, 2, 159, 10.1111/j.1708-8208.2000.tb00007.x
Albrektsson, 2005, The impact of oral implants—past and future, 1966–2042, J Can Dent Assoc, 71, 327
Hansson, 1999, The relation between surface roughness and interfacial shear strength for bone-anchored implants. A mathematical model, J Biomech, 32, 829, 10.1016/S0021-9290(99)00058-5
Testori, 2001, A prospective multicenter clinical study of the Osseotite implant: four-year interim report, Int J Oral Maxillofac Implants, 16, 193
Conner, 2003, Guided bone regeneration around titanium plasma-sprayed, acid-etched and hydroxyapatite-coated implants in the canine model, J Periodontol, 74, 658, 10.1902/jop.2003.74.5.658
Esposito, 2005, Interventions for replacing missing teeth: different types of dental implants, Cochrane Database Syst Rev, 25, CD003815
Urban, 2000, Dissemination of wear particles to the liver, spleen and abdominal lymph nodes of patients with hip or knee replacement, J Bone Jt Surg Am, 82, 457, 10.2106/00004623-200004000-00002
Browne, 2000, Effect of mechanical surface pretreatment on metal ions release, Biomaterials, 21, 385, 10.1016/S0142-9612(99)00200-8
Martini, 2003, Detachment of titanium and fluorohydroxyapatite particles in unloaded endosseous implants, Biomaterials, 24, 1309, 10.1016/S0142-9612(02)00508-2
Roccuzzo, 2001, Early loading of sandblasted and acid-etched (SLA) implants: a prospective split-mouth comparative study, Clin Oral Implants Res, 12, 572, 10.1034/j.1600-0501.2001.120604.x
Taba Junior, 2003, Radiographic evaluation of dental implants with different surface treatments: an experimental study in dogs, Implant Dent, 12, 252, 10.1097/01.ID.0000075580.55380.E5
Ong, 2004, Evaluation of titanium plasma-sprayed and plasma-sprayed hydroxyapatite implants in vivo, Biomaterials, 25, 4601, 10.1016/j.biomaterials.2003.11.053
Aparicio, 2003, Corrosion behavior of commercially pure titanium shot blasted with different materials and size of shot particles for dental implant applications, Biomaterials, 24, 263, 10.1016/S0142-9612(02)00314-9
Ivanoff, 2001, Histologic evaluation of the bone integration of TiO(2) blasted and turned titanium microimplants in humans, Clin Oral Implants Res, 12, 128, 10.1034/j.1600-0501.2001.012002128.x
Rasmusson, 2001, Effects of implant design and surface on bone regeneration and implant stability: an experimental study in the dog mandible, Clin Implant Dent Relat Res, 3, 2, 10.1111/j.1708-8208.2001.tb00123.x
Gotfredsen, 2001, A prospective 5-year study of fixed partial prostheses supported by implants with machined and TiO2-blasted surface, J Prosthodont, 10, 2, 10.1111/j.1532-849X.2001.00002.x
Rasmusson, 2005, A 10-year follow-up study of titanium dioxide-blasted implants, Clin Implant Dent Relat Res, 7, 36, 10.1111/j.1708-8208.2005.tb00045.x
van Steenberghe, 2000, A prospective split-mouth comparative study of two screw-shaped self-tapping pure titanium implant systems, Clin Oral Implants Res, 11, 202, 10.1034/j.1600-0501.2000.011003202.x
Astrand, 1999, Astra Tech and Branemark System implants: a prospective 5-year comparative study. Results after one year, Clin Implant Dent Relat Res, 1, 17, 10.1111/j.1708-8208.1999.tb00087.x
Abron, 2001, Evaluation of a predictive model for implant surface topography effects on early osseointegration in the rat tibia model, J Prosth Dent, 85, 40, 10.1067/mpr.2001.112415
Novaes, 2002, Histomorphometric analysis of the bone-implant contact obtained with 4 different implant surface treatments placed side by side in the dog mandible, Int J Oral Maxillofac Implants, 17, 377
Piatelli, 2002, Bone response to machined and resorbable blast material titanium implants: an experimental study in rabbits, J Oral Implantol, 28, 2, 10.1563/1548-1336(2002)028<0002:BRTMAR>2.3.CO;2
Mueller, 2003, Evaluation of the interface between bone and titanium surfaces being blasted by aluminium oxide or bioceramic particles, Clin Oral Implants Res, 3, 349, 10.1034/j.1600-0501.2003.00791.x
Massaro, 2002, Comparative investigation of the surface of commercial titanium dental implants. Part 1: chemical composition, J Mater Sci Mater Med, 13, 535, 10.1023/A:1015170625506
Zinger, 2004, Time-dependent morphology and adhesion of osteoblastic cells on titanium model surfaces featuring scale-resolved topography, Biomaterials, 25, 2695, 10.1016/j.biomaterials.2003.09.111
Wong, 1995, Effect of surface topology on the osseointegration of implant materials in trabecular bone, J Biomed Mater Res, 29, 1567, 10.1002/jbm.820291213
Cho, 2003, The removal torque of titanium screw inserted in rabbit tibia treated by dual acid etching, Biomaterials, 24, 3611, 10.1016/S0142-9612(03)00218-7
Park, 2000, Red blood cell and platelet interactions with titanium implant surfaces, Clin Oral Implants Res, 11, 530, 10.1034/j.1600-0501.2000.011006530.x
Trisi, 2003, Bone-implant contact on machined and dual acid-etched surfaces after 2 months of healing in the human maxilla, J Periodontol, 74, 945, 10.1902/jop.2003.74.7.945
Davies, 1998, Mechanisms of endosseous integration, Int J Prosthodont, 11, 391
Trisi, 2002, Bone-implant contact and bone quality: evaluation of expected and actual bone contact on machined and osseotite implant surfaces, Int J Periodontics Restorative Dent, 22, 535
Trisi, 2003, Bone-to-implant apposition with machined and MTX microtextured implant surfaces in human sinus grafts, Int J Periodontics Restorative Dent, 23, 427
Cochran, 2002, The use of reduced healing times on ITI implants with a sandblasted and acid-etched (SLA) surface: early results from clinical trials on ITI SLA implants, Clin Oral Implants Res, 13, 144, 10.1034/j.1600-0501.2002.130204.x
Novaes, 2004, Influence of implant microstructure on the osseointegration of immediate implants placed in periodontally infected sites. A histomorphometric study in dogs, Clin Oral Implants Res, 15, 34, 10.1046/j.1600-0501.2003.00968.x
Papalexiou, 2004, Influence of implant microstructure on the dynamics of bone healing around immediate implants placed into periodontally infected sites. A confocal laser scanning microscopic study, Clin Oral Implants Res, 15, 44, 10.1111/j.1600-0501.2004.00995.x
Ellingsen, 1995, Pre-treatment of titanium implants with fluoride improves their retention in bone, J Mater Sci Mater Med, 6, 749, 10.1007/BF00134312
Ellingsen, 2004, Improved retention and bone-to-implant contact with fluoride-modified titanium implants, Int J Oral Maxillofac Implants, 19, 659
Cooper, 2006, Fluoride modification effects on osteoblast behavior and bone formation at TiO(2) grit-blasted c.p. titanium endosseous implants, Biomaterials, 27, 926, 10.1016/j.biomaterials.2005.07.009
Yokoyama, 2002, Fracture mechanisms of retrieved titanium screw thread in dental implants, Biomaterials, 23, 2459, 10.1016/S0142-9612(01)00380-5
Sul, 2001, Oxidized implants and their influence on the bone response, J Mater Sci Mater Med, 12, 1025, 10.1023/A:1012837905910
Sul, 2005, Optimum surface properties of oxidized implants for reinforcement of osseointegration: surface chemistry, oxide thickness, porosity, roughness, and crystal structure, Int J Oral Maxillofac Implants, 20, 349
Xiropaidis, 2005, Bone-implant contact at calcium phosphate-coated and porous titanium oxide (TiUnite)-modified oral implants, Clin Oral Implants Res, 16, 532, 10.1111/j.1600-0501.2005.01126.x
Huang, 2005, Bone formation at titanium porous oxide (TiUnite) oral implants in type IV bone, Clin Oral Implants Res, 16, 105, 10.1111/j.1600-0501.2004.01086.x
Sul, 2002, Qualitative and quantitative observations of bone tissue reactions to anodised implants, Biomaterials, 23, 1809, 10.1016/S0142-9612(01)00307-6
Sul, 2002, Resonance frequency and removal torque analysis of implants with turned and anodized surface oxides, Clin Oral Implants Res, 13, 252, 10.1034/j.1600-0501.2002.130304.x
Rocci, 2003, Immediate loading of Branemark System TiUnite and machined-surface implants in the posterior mandible: a randomized open-ended clinical trial, Clin Implant Dent Relat Res, 5, S57, 10.1111/j.1708-8208.2003.tb00016.x
Jungner, 2005, Oxidized titanium implants (Nobel Biocare TiUnite) compared with turned titanium implants (Nobel Biocare mark III) with respect to implant failure in a group of consecutive patients treated with early functional loading and two-stage protocol, Clin Oral Implants Res, 16, 308, 10.1111/j.1600-0501.2005.01101.x
Schupbach, 2005, The human bone-oxidized titanium implant interface: a light microscopic, scanning electron microscopic, back-scatter scanning electron microscopic, and energy-dispersive X-ray study of clinically retrieved dental implants, Clin Implant Dent Relat Res, 7, S36, 10.1111/j.1708-8208.2005.tb00073.x
Sul, 2002, Oxidized titanium screws coated with calcium ions and their performance in rabbit bone, Int J Oral Maxillofac Implants, 17, 625
Sul, 2004, Biomechanical measurements of calcium-incorporated oxidized implants in rabbit bone: effect of calcium surface chemistry of a novel implant, Clin Implant Dent Relat Res, 6, 101, 10.1111/j.1708-8208.2004.tb00032.x
de Groot, 1998, Calcium phosphate coatings for medical implants, Proc Inst Mech Eng, 212, 137, 10.1243/0954411981533917
Daculsi, 2003, Current state of the art of biphasic calcium phosphate bioceramics, J Mater Sci Mater Med, 14, 195, 10.1023/A:1022842404495
Davies, 2003, Understanding peri-implant endosseous healing, J Dent Educ, 67, 932, 10.1002/j.0022-0337.2003.67.8.tb03681.x
Morris, 2000, Periodontal-type measurements associated with hydroxyapatite-coated and non-HA-coated implants: uncovering to 36 months, Ann Periodontol, 5, 56, 10.1902/annals.2000.5.1.56
Barrere, 2003, Osteointegration of biomimetic apatite coating applied onto dense and porous metal implants in femurs of goats, J Biomed Mater Res, 67, 655, 10.1002/jbm.b.10057
Geurs, 2002, Influence of implant geometry and surface characteristics on progressive osseointegration, Int J Oral Maxillofac Implants, 17, 811
Filiaggi, 1991, Characterization of the interface in the plasma-sprayed HA coating/Ti-Al6-4V implant system, J Biomed Mater Res, 25, 1211, 10.1002/jbm.820251004
Radin, 1992, Plasma spraying induced changes of calcium phosphate ceramic characteristics and the effect on in vitro stability, Mater Med, 3, 33, 10.1007/BF00702942
De Groot, 1994, State of the art: hydroxylapatite coatings for dental implants, J Oral Implant, 20, 232
Kim, 1994, Characterization of commercial HA-coated implants, J Dent Res, 73, 137
LeGeros, 1995, Calcium phosphates in plasma-sprayed HA coatings, Ceram Trans, 48, 173
Wheeler, 1996, Eight-year clinical retrospective study of titanium plasma-sprayed and hydroxyapatite-coated cylinder implants, Int J Oral Maxillofac Implants, 11, 340
Chang, 1999, Biomechanical and morphometric analysis of hydroxyapatite-coated implants with varying cristallinity, J Oral Maxillofac Surg, 57, 1096, 10.1016/S0278-2391(99)90333-6
Lee, 2000, Survival of hydroxypatite-coated implants: a meta-analytic review, J Oral Maxillofac Surg, 58, 1372, 10.1053/joms.2000.18269
Tinsley, 2001, A comparison of hydroxyapatite coated implant retained fixed and removable mandibular prostheses over 4 to 6 years, Clin Oral Implant Res, 12, 159, 10.1034/j.1600-0501.2001.012002159.x
Anselme, 2002, Effect of grooved titanium substratum on human osteoblastic cell growth, J Biomed Mater Res, 60, 529, 10.1002/jbm.10101
Bigerelle, 2002, Improvement in the morphology of Ti-based surfaces: a new process to increase in vitro human osteoblast response, Biomaterials, 23, 1563, 10.1016/S0142-9612(01)00271-X
Zhu, 2004, Cellular reactions of osteoblasts to micron- and submicron-scale porous structures of titanium surfaces, Cells Tissues Organs, 178, 13, 10.1159/000081089
Wang, 2003, Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid, Biomaterials, 24, 4631, 10.1016/S0142-9612(03)00357-0
Yang, 2004, Preparation of bioactive titanium metal via anodic oxidation treatment, Biomaterials, 25, 1003, 10.1016/S0142-9612(03)00626-4
Wang, 2004, Preparation and characterization of electrodeposited calcium phosphate/chitosan coating on Ti6Al4V plates, J Dent Res, 83, 296, 10.1177/154405910408300405
Ban, 1993, Deposition of calcium phosphate on titanium by electrochemical process in simulated body fluid, Jpn J Appl Phys, 32, 1577, 10.1143/JJAP.32.L1577
Sena, 2002, Hydroxyapatite deposition by electrophoresis on titanium sheets with different surface finishing, J Biomed Mater Res, 60, 1, 10.1002/jbm.10003
Kokubo, 1989, Apatite coating on various substrates in simulated body fluids, Bioceramics, 2, 235
Habibovic, 2002, Biomimetic hydroxyapatite coating on metal implants, J Am Ceram Soc, 85, 517, 10.1111/j.1151-2916.2002.tb00126.x
Barrere, 2004, Nano-scale study of the nucleation and growth of calcium phosphate coating on titanium implants, Biomaterials, 25, 2901, 10.1016/j.biomaterials.2003.09.063
Barrere, 2003, In vitro and in vivo degradation of biomimetic octacalcium phosphate and carbonate apatite coatings on titanium implants, J Biomed Mater Res, 64, 378, 10.1002/jbm.a.10291
Leeuwenburgh, 2001, Osteoclastic resorption of biomimetic calcium phosphate coatings in vitro, J Biomed Mater Res, 56, 208, 10.1002/1097-4636(200108)56:2<208::AID-JBM1085>3.0.CO;2-R
Habibovic, 2005, Biological performance of uncoated and octacalcium phosphate-coated Ti6Al4V, Biomaterials, 26, 23, 10.1016/j.biomaterials.2004.02.026
Bessho, 1999, BMP stimulation of bone response adjacent to titanium implants in vivo, Clin Oral Implants Res, 10, 212, 10.1034/j.1600-0501.1999.100304.x
Wikesjo, 2002, RhBMP-2/alphaBSM induces significant vertical alveolar ridge augmentation and dental implant osseointegration, Clin Implant Dent Relat Res, 4, 174, 10.1111/j.1708-8208.2002.tb00169.x
Tatakis, 2002, Peri-implant bone regeneration using recombinant human bone morphogenetic protein-2 in a canine model: a dose-response study, J Periodontal Res, 37, 93, 10.1034/j.1600-0765.2002.00021.x
Stenport, 2003, Failure to induce supracrestal bone growth between and around partially inserted titanium implants using bone morphogenetic protein (BMP): an experimental study in dogs, Clin Oral Implants Res, 14, 219, 10.1034/j.1600-0501.2003.00861.x
Boyne, 2004, Demonstration of the osseoinductive effect of bone morphogenetic protein within endosseous dental implants, Implant Dent, 13, 180, 10.1097/01.ID.0000127520.06443.42
Liu, 2005, BMP-2 liberated from biomimetic implant coatings induces and sustains direct ossification in an ectopic rat model, Bone, 36, 745, 10.1016/j.bone.2005.02.005
Huang, 2005, Bone regeneration in a rat cranial defect with delivery of PEI-condensed plasmid DNA encoding for bone morphogenetic protein-4 (BMP-4), Gene Ther, 12, 418, 10.1038/sj.gt.3302439
Josse, 2004, Chemically modified calcium phosphates as novel materials for bisphosphonate delivery, Adv Mater, 16, 1423, 10.1002/adma.200306340
Meraw, 1999, Qualitative analysis of peripheral peri-implant bone and influence of alendronate sodium on early bone regeneration, J Periodontol, 70, 1228, 10.1902/jop.1999.70.10.1228
Meraw, 1999, Use of alendronate in peri-implant defect regeneration, J Periodontol, 70, 151, 10.1902/jop.1999.70.2.151
Yoshinari, 2001, Immobilization of bisphosphonates on surface modified titanium, Biomaterials, 22, 709, 10.1016/S0142-9612(00)00234-9
Kajiwara, 2005, The bisphosphonate pamidronate on the surface of titanium stimulates bone formation around tibial implants in rats, Biomaterials, 26, 581, 10.1016/j.biomaterials.2004.02.072
Peter, 2005, Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration, Bone, 36, 52, 10.1016/j.bone.2004.10.004
Mabboux, 2004, Surface free energy and bacterial retention to saliva-coated dental implant materials—an in vitro study, Colloids Surf B Biointerfaces, 39, 199, 10.1016/j.colsurfb.2004.08.002