Surface texture evaluation of additively manufactured metallic cellular scaffolds for acetabular implants using X-ray computed tomography
Tóm tắt
The surface topography of acetabular implants plays a key role in providing cell attachment and proliferation. The measurement and characterisation of the surface texture of the cellular scaffold layer on the acetabular cup are very difficult due to the 3D nature of scaffold geometry. It is proposed to use X-ray computed tomography (XCT) to measure the surface texture of an electron beam melting-produced titanium acetabular cup. The surface texture of its cellular scaffold is evaluated using the newly developed 3D surface texture parameters, which allows surface characterisation on 3D triangular mesh surfaces. Four commonly used height parameters, i.e. the arithmetical mean height Sa, the root mean square height Sq, the skewness Ssk and the kurtosis Sku, are calculated from surface patches extracted from the XCT scanned triangular mesh surface. In addition, the surface peak density and pit density, which are more related to cell communication and proliferation, are estimated based on the 3D watershed segmentation. The Wolf pruning with an empirical threshold 12 µm is used to control the over-segmentation.
Tài liệu tham khảo
Tan XP, Tan YJ, Chow CSL, Tor SB, Yeong WY (2017) Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: a state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. Mater Sci Eng C 76:1328–1343
de Vasconcellos LM, Cairo CA, de Vasconcellos LG, de Alencastro Graça ML, do Prado RF, Carvalho YR (2012) Porous titanium, by powder metallurgy for biomedical application: characterization, cell citotoxity and in vivo tests of osseointegration. INTECH Open Access Publisher, Thousand Oaks
Biemond JE, Eufrasio TS, Hannink G, Verdonschot N, Buma P (2011) Assessment of bone in-growth potential of biomimetic hydroxyapatite and brushite coated porous E-beam structures. J Mater Sci Mater Med 22(4):917–925
Li X, Feng YF, Wang CT, Li GC, Lei W, Zhang ZY, Wang L (2012) Evaluation of biological properties of electron beam melted Ti6Al4V implant with biomimetic coating in vitro and in vivo. PLoS ONE 7(12):e52049
Singh R, Singh S, Kapoor P (2016) Investigating the surface roughness of implant prepared by combining fused deposition modeling and investment casting. J Process Mech Eng 230(5):403–410
Hutmacher DW (2000) Scaffolds in tissue engineering bone and cartilage. Biomaterials 21:2529–2543
Harrysson OLA, Cansizoglu O, Marcellin-Little DJ, Cormier DR, West HA (2008) Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. Mater Sci Eng C 28:366–373
Novaes AB Jr, Souza SL, Barros RR, Pereira KK, Iezzi G, Piattelli A (2010) Influence of implant surfaces on osseointegration. Braz Dent J 21(6):471–481
Hansson S, Norton M (1999) The relation between surface roughness and interfacial shear strength for bone-anchored implants. A mathematical model. J Biomech 32:829–836
Biemond JE, Hannink G, Verdonschot N, Buma PJ (2013) Bone ingrowth potential of electron beam and selective laser melting produced trabecular-like implant surfaces with and without a biomimetic coating. Mater Sci Mater Med 24:745–753
de Wild M, Schumacher R, Mayer K, Schkommodau E, Thoma D, Bredell M, Kruse Gujer A, Grätz KW, Weber FE (2013) Bone regeneration by the osteoconductivity of porous titanium implants manufactured by selective laser melting: a histological and micro computed tomography study in the rabbit. Tissue Eng 19:2645–2654
Jalota S, Bhaduriand SB, Tas AC (2007) Osteoblast proliferation on neat and apatite-like calcium phosphate-coated titanium foam scaffolds. Mater Sci Eng C 27:432–440
Sing SL, An J, Yeong WY, Wiria FE (2015) Laser and electron-beam powder-bed additive manufacturing of metallic implants: a review on processes, materials and designs. J Orthop Res 34:369–385
Ponader S, Vairaktaris E, Heinl P, Wilmowsky CV, Rottmair A, Körner C, Singer RF, Holst S, Schlegel KA, Neukam FW, Nkenke E (2008) Effects of topographical surface modifications of electron beam melted Ti–6Al–4V titanium on human fetal osteoblasts. J Biomed Mater Res Part A 84:1111–1119
Boyan BD, Dean DD, Lohmann CH, Cochran DL, Sylvia VL, Schwartz Z (2001) The titanium-bone cell interface in vitro: the role of the surface in promoting osteointegration. In: Brunette DM, Tengvall P, Textor M, Thomsen P (eds) Titanium in medicine. Springer, Berlin, pp 561–586
Lou S, Sun W, Brown B, Pagani L, Zeng W, Jiang X, Scott PJ (2018) Simulation for XCT and CMM measurements of additively manufactured surfaces, ASPE and euspen summer topical meeting advancing precision in additive manufacturing, Lawrence Berkeley National Laboratory, Berkeley, California, USA
Kruth JP, Bartscher M, Carmignato S, Schmitt R, De Chiffre L, Weckenmann A (2011) Computed tomography for dimensional metrology. CIRP Ann Manuf Technol 60:821–842
Weckenmann A, Kramer P (2013) Computed tomography in quality control: chances and challenges. Proc Inst Mech Eng B J Eng 227:634–642
Borges de Oliveira F, Stolfi A, Bartscher M, De Chiffre L, Neuschaefer-Rube U (2016) Experimental investigation of surface determination process on multi-material components for dimensional computed tomography. Case Stud Nondestr Test Eval B 6:93–103
Lifton JJ, Malcolm AA, McBride JW (2015) On the uncertainty of surface determination in X-ray computed tomography for dimensional metrology. Meas Sci Technol 26:035003
Reinhart C (2011) Industrial CT & precision, conference in “Application of CT Scanning in Industry”, Heidelberg, Germany
Lorensen WE, Cline HE (1987) Marching cubes: a high resolution 3D surface construction algorithm. Comput Gr 21(4):163–169
Kerckhofs G, Pyka G, Moesen M, van Bael S, Schrooten J, Wevers M (2012) High-resolution microfocus X-ray computed tomography for 3D surface roughness measurements of additive manufactured porous materials. Adv Eng Mater 15:153–158
Townsend A, Pagani L, Scott P, Blunt L (2017) Areal surface texture data, extraction from X-ray computed tomography reconstructions of metal additively manufactured parts. Precis Eng 48:254–264
Thompson A, Senin N, Giusca C, Leach R (2017) Topography of selectively laser melted surfaces: a comparison of different measurement methods. Ann CIRP 66:543–546
Volume Graphics GmbH, VGStudio MAX
Centin M, Signoroni A (2015) RameshCleaner: conservative fixing of triangular meshes. Smart tools and apps for graphics—Eurographics Italian chapter conference, The Eurographics Association
Botsch M, Kobbelt L, Pauly M, Alliez P, Levy B (2010) Polygon mesh processing. Taylor & Francis, Thames
ISO 25178-2 (2012) Geometrical product specifications (GPS)—surface texture: areal—part 2: terms, definitions and surface texture parameters
Pagani L, Qi QF, Jiang X, Scott PJ (2017) Towards a new definition of areal surface texture parameters on freeform surface. Measurement 109:281–291
Lou S, Jiang X, Sun W, Zeng W, Pagani L, Scott PJ (2018) Characterisation methods for powder bed fusion processed surface topography. Precis Eng. https://doi.org/10.1016/j.precisioneng.2018.09.007
Museth K, Lait J, Johanson J, Budsberg J, Henderson R, Alden M, Cucka P, Hill D, Pearce A (2013) OpenVDB: an open-source data structure and toolkit for high-resolution volumes. Proc ACM SIGGRAPH Courses 20(10):1405–1417
Jacobson A, Panozzo D et al (2016) LIBIGL: a simple C++ geometry processing library. http://libigl.github.io/libigl/. Accessed 5 Apr 2019
Scott PJ (2009) Feature parameters. Wear 266:548–551
Mesmoudi M, De Floriani L (2007) Morphology-based representations of discrete scalar fields. In: GRAPP 2007, Barcelona, Spain, pp 137–144
Scott PJ (2004) Pattern analysis and metrology: the extraction of stable features from observable measurements. Proc R Soc A 460:2845–2864
Townsend A, Racasan R, Leach R, Senin N, Thompson A, Ramsey A, Bate D, Woolliams P, Brown S, Blunt L (2018) An interlaboratory comparison of X-ray computed tomography measurement for texture and dimensional characterisation of additively manufactured parts. Addit Manuf 23:422–432
Abdul-Rahman H, Lou S, Zeng W, Jiang X, Scott PJ (2016) Freeform texture representation and characterisation based on triangular mesh parameterisation techniques. Measurement 92:172–182