Surface roughness modelling in finish face milling under MQL and dry cutting conditions

A.E. Diniz, J.R. Ferreira and F.T. Filho, Influence of refrigeration/lubrication condition on SAE 52100 hardened steel turning at several cutting speeds. International Journal of Machine Tools and Manufacture 43 (2003) 317–326.

K. Weinert, I. Inasaki, J.W. Sutherland and Wakabayashi, Dry machining and minimum quantity lubrication. Annals of the CIRP. 53/2 (2004) 1–27.

J.M. Vieira, A.R. Machado and E.O. Ezugwu, Performance of cutting fluids during face milling of steels, Journal of Material Processing Technology, 116 (2001) 244–251.

N. Liu, C. Han, H. Yang, Y. Xu, M. Shi, S. Chao, F. Xie, The milling performances of TiC-based cermet tools with TiN nanopowders addition against normalized medium carbon steel AISI1045, Wear, 258 (2005) 1688–1695.

M. Rahman, A. S. Kumar, M.U. Salam, Experimental evaluation on the effect of minimal quantities of lubricant in milling, International Journal of Machine Tools & Manufacture, 42 (2002) 539–547.

Y.S. Liao, H.M. Lin, Y.C. Chen, Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool. International Journal of Machine Tools & Manufacture, 47 (2007) 1667–1676.

C. Bruni, L. d’Apolito, A. Forcellese, F. Gabrielli, L.Gobbi, M. Simoncini, Finish milling operations of AISI 420 B stainless steel under dry and wet conditions, In: Proc. of the 10th CIRP International Workshop on Modelling of Machining Operations, Eds, F. Micari and L. Filice, Reggio Calabria, Italy (2007) 275–279.

B. Ozcelik and M. Bayramoglu, The statistical modelling of surface roughness in high-speed flat end milling. International Journal of Machine Tools & Manufacture, 46 (2006) 1395–1402.

P.G. Bernardos, G.-C. Vosniakos, Predicting surface roughness in machining: a review. International Journal of Machine Tools & Manufacture, 43 (2003) 833–844.

M.-Y. Wang, H.-Y. Chang, Experimental study of surface roughness in slot end milling AL2014-T6. International Journal of Machine Tools & Manufacture, 44 (2004) 51–57.

Sandvik Coromant, 2007, Insert Technical Data ( http://www.coromant.sandvik.com ).