Surface quality and microstructure of Al-Mg alloy strips fabricated by vertical-type high-speed twin-roll casting

Romhanji, 2004, On the Al-Mg alloy sheets for automotive application: problems and solutions, Metalurgija-J Metall, 10, 205 Phillion, 2006, X-ray micro-tomographic observations of hot tear damage in an Al-Mg commercial alloy, Scr Mater, 55, 489, 10.1016/j.scriptamat.2006.03.035 Bayat, 2014, Surface structure formation in direct chill (DC) casting of Al alloys, JOM, 66, 700, 10.1007/s11837-014-0950-y Haga, 2003, Study on high-speed twin-roll caster for aluminum alloys, J Mater Process Technol, 143-144, 895, 10.1016/S0924-0136(03)00400-X Haga, 2003, Strip casting of A5182 alloy using a melt drag twin-roll caster, J Mater Process Technol, 133, 103, 10.1016/S0924-0136(02)00251-0 Forbord, 2006, The formation of surface segregates during twin roll casting of aluminum alloys, Mater Sci Eng A, 415, 12, 10.1016/j.msea.2005.08.224 Harada, 2015, Fabrication of high-quality wrought product-grade cast aluminum alloys by high-speed twin-roll casting, J Japan Found Eng Soc, 87, 772 Kim, 2011, Effect of Si content on strip thickness and solidified structure in high-speed twin-roll cast Al-Si alloy strips, Mater Trans, 52, 856, 10.2320/matertrans.L-MZ201116 Xu, 2016, Numerical simulation of the fluid flow, heat transfer, and solidification during the twin-roll continuous casting of steel and aluminum, Metall Mater Trans B, 47, 740, 10.1007/s11663-015-0486-8