Surface modification of multi-directional forged biodegradable Mg-Zn alloy by ball burnishing process: Modeling and analysis using deep neural network

Farraro, 2014, Revolutionizing orthopaedic biomaterials: the potential of biodegradable and bioresorbable magnesium-based materials for functional tissue engineering, J Biomech, 47, 1979, 10.1016/j.jbiomech.2013.12.003

Murugan, 2005, Development of nanocomposites for bone grafting, Compos Sci Technol, 65, 2385, 10.1016/j.compscitech.2005.07.022

Ye, 2015, Mechanical properties and phase transition of biomedical titanium alloy strips with initial quasi-single phase state under highenergy electropulses, J Mech Behav Biomed Mater, 42, 100, 10.1016/j.jmbbm.2014.11.009

Staiger, 2006, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728, 10.1016/j.biomaterials.2005.10.003

Zreiqat, 2002, Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants, J Biomed Mater Res, 62, 175, 10.1002/jbm.10270

Tapiero, 2003, Trace elements in human physiology and pathology: zinc and metallothioneins, Biomed Pharmacother, 57, 399, 10.1016/S0753-3322(03)00081-7

Song, 2007, Control of biodegradation of biocompatible magnesium alloys, Corros Sci, 49, 1696, 10.1016/j.corsci.2007.01.001

Haferkamp, 2003, 226

Mordike, 2006, Physical metallurgy, 76

Gu, 2009, In vitro corrosion and biocompatibility of binary magnesium alloys, Biomaterials, 30, 484, 10.1016/j.biomaterials.2008.10.021

Boehlert, 2006, The microstructure, tensile properties, and creep behavior of Mg–Zn alloys containing 0–4.4 wt.% Zn, Mater Sci Eng A, 417, 315, 10.1016/j.msea.2005.11.006

Ramesh, 2019, Influence of multidirectional forging on microstructural, mechanical, and corrosion behavior of Mg-Zn alloy, J. Mater. Eng. Perform, 28, 2053, 10.1007/s11665-019-04007-0

Bakhsheshi-Rad, 2012, Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys, Mater Des, 33, 88, 10.1016/j.matdes.2011.06.057

Dong, 2021, Microstructure evolution and microhardness of Mg-13Gd-4Y–2Zn-0.5Zr alloy via pre-solution and multi-directional forging (MDF) process, J Alloys Compd, 853, 157066, 10.1016/j.jallcom.2020.157066

Ramesh, 2019, Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg–Zn–Ca alloy and investigation of corrosion behavior, Mater Res Express, 6, 1065, 10.1088/2053-1591/ab40f2

Xia, 2015, Microstructure, texture and mechanical properties of coarse-grained Mg–Gd–Y–Nd–Zr alloy processed by multidirectional forging, J Alloys Compd, 623, 62, 10.1016/j.jallcom.2014.10.084

Li, 2017, Nanoscale deformation of multiaxially forged ultrafine-grainedMg-2Zn-2Gd alloy with high strength-high ductility combination andcomparison with the coarse-grained counterpart, J Mater Sci Technol, 34, 311, 10.1016/j.jmst.2017.07.023

Guo, 2013, Enhanced microstructure homogeneity and mechanical properties of AZ31-Si composite by cyclic closed-die forging, J Alloys Compd, 552, 09, 10.1016/j.jallcom.2012.11.067

Nie, 2015, Multidirectional forging of AZ91 magnesium alloy and its effects on microstructures and mechanical properties, Mater Sci Eng A, 624, 157, 10.1016/j.msea.2014.11.076

Ramesh, 2019, Investigation of dry sliding wear properties of multi-directional forged Mg–Zn alloys, J Magnes Alloys, 7, 444, 10.1016/j.jma.2019.05.008

Cagan, 2020, Catalin Iulian Pruncu, Berat Baris Buldum, An investigation into ball burnishing process of magnesium alloy on CNC lathe using different environments, J Magnes Alloys, 10.1016/j.jma.2020.06.008

Uddina, 2021, Synergistic effect of deep ball burnishing and HA coating on surface integrity, corrosion and immune response of biodegradable AZ31B Mg alloys, Mater Sci Eng C, 118

Saldana-Robles, 2018, Influence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel, Surf Coat Technol, 339, 191, 10.1016/j.surfcoat.2018.02.013

Cao, 2020, Investigation of corrosion resistance enhancement for biodegradable magnesium alloy by ball burnishing process, Int J Automot Technol, 14, 175, 10.20965/ijat.2020.p0175

Denkena, 2007, Biocompatible magnesium alloys as absorbable implant materials-adjusted surface and subsurface properties by machining processes, Ann CIRP, 56, 113, 10.1016/j.cirp.2007.05.029

Pu, 2012, Grain refined and basal textured surface produced by burnishing for improved corrosion performance of AZ31B Mg alloy, Corros Sci, 57, 192, 10.1016/j.corsci.2011.12.018

Maren, 2014

Cun, 2015, Deep learning, Nature, 521, 436, 10.1038/nature14539

Shettigar, 2019, Deep learning techniques using data science, Int J Recent Technol Eng, 8, 2277

Taghavifar, 2014, Diesel engine spray characteristics prediction with hybridized artificial neural network optimized by genetic algorithm, Energy, 71, 656, 10.1016/j.energy.2014.05.006

Hayajneh, 2009, Prediction of tribological behavior of aluminum–copper based composite using artificial neural network, J Alloys Compd, 470, 584, 10.1016/j.jallcom.2008.03.035

Devadiga, 2019, Artificial neural network technique to predict the properties of multiwall carbon nanotube-fly ash reinforced aluminium composite, J Mater Res Technol, 8, 3970, 10.1016/j.jmrt.2019.07.005

Taskin, 2008, Artificial neural network (ANN) approach to prediction of diffusion bonding behavior(shear strength) of Ni–Ti alloys manufactured by powder metalurgy method, Math Comput Appl, 13, 183

Jalham, 2003, Modeling capability of the artificial neuralnetwork (ANN) to predict the effect of the hot deformationparameters on the strength of Al-base metal matrixcomposites, Compos Sci Technol, 63, 63, 10.1016/S0266-3538(02)00176-8

Liu, 2019

Durmus, 2006, The use of neural networksfor the prediction of wear loss and surface roughness of AA6351 aluminum alloy, Mater Des, 27, 156, 10.1016/j.matdes.2004.09.011

Ramesh, 2020

Lee, 2017, Lognet: energy-efficient neural networks using logrithmic computations

Hou, 2010, Nanocrystalline structure of magnesium alloys subjected to high energy shot peening, J Alloys Compd, 492, 347, 10.1016/j.jallcom.2009.11.090

Mordyuk, 2008, Characterization of ultrasonically peened and lasershock peened surface layers of AISI 321 stainless steel, Surf. Coat. Technol., 202, 4875, 10.1016/j.surfcoat.2008.04.080

Guo, 2011, Effects of grain size, texture and twinning on mechanical properties and work-hardening behavior of AZ31 magnesium alloys, Mater Sci Eng A, 528, 8537, 10.1016/j.msea.2011.07.076

Huang, 2016, Microstructure and mechanical properties of AZ31 magnesium alloy processed by multi-directional forging at different temperatures, Mater Sci Eng A, 674, 52, 10.1016/j.msea.2016.07.052

Kim, 2003, Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing, Acta Mater, 51, 3293, 10.1016/S1359-6454(03)00161-7

Li, 2007, Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy, Mater Sci Eng A, 466, 134, 10.1016/j.msea.2007.02.029

G.L. Song, Z.Q. Xu, The surface, microstructure and corrosion of magnesium alloy AZ31 sh.

Salahshoor, 2011, Surface integrity of biodegradable magnesium- calcium orthopedic implant by burnishing, J Mech Behav Biomed Mater, 4, 1888, 10.1016/j.jmbbm.2011.06.006

Song, 2010, Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution, Corros Sci, 52, 481, 10.1016/j.corsci.2009.10.004

Rondellia, 2005, In vitro corrosion study by EIS of a nickel-free stainless steel for orthopaedic applications, Biomaterials, 26, 739, 10.1016/j.biomaterials.2004.03.012