Surface Properties of Liquid Al-Ni Alloys: Experiments Vs Theory
Tóm tắt
The present study is an overview of the surface properties of liquid Al-Ni alloys, which are of great importance for the design and development of new Al-Ni and Ni-based industrial alloys, widely used as functional and structural materials. The solidification and thus, the microstructural evolution are directly dependent on the interface/surface properties of metallic melts. Therefore, numerical simulation of microstructure evolution requires reliable property data as input to such models. Taking into account the experimental difficulties related to a high reactivity of liquid Al-Ni alloys and the effects of impurities on their surface properties, the surface tension over the whole concentration range has been determined in the frameworks of three international research projects. Namely, the surface tension measurements have been carried out by both traditional container-based and as an alternative, containerless methods within the ESA-MAP ThermoProp and ESA-MAP Thermolab Projects and also under the EU FP6-IMPRESS Project. The obtained datasets were analysed and subsequently compared with the model predicted values as well as with the literature data. A strong exothermic mixing characterises the Al-Ni system and the presence of a few intermetallic compounds in the solid state leads to the formation of short range ordered elements or complexes in the liquid phase, at least near the melting temperature, which significantly affects the surface properties of alloy melts. Aiming to estimate the effects of short range ordering on these properties, the Compound Formation Model (CFM) and the Quasi Chemical Approximation (QCA) for regular solution were applied.
Tài liệu tham khảo
Amore, S., Valenza, F., Giuranno, D., Novakovic, R., Dalla Fontana, G., Battezzati, L., Ricci, E.: Thermophysical properties of some Ni-based superalloys in the liquid state relevant for solidification processing. J. Mater. Sci. 51, 1680–1688 (2016)
Ansara, I., Dupin, N., Lukas, H.L., Sundman, B.: Thermodynamic assessment of the Al-Ni system. J. Alloys Compd. 247(1–2), 20–30 (1997)
Ashby, M.F., Bréchet, Y.J.M., Cebon, D., Salvo, L.: Selection strategies for materials and processes. Mater. Design. 25(1), 51–67 (2004)
Aune, R., Battezzati, L., Egry, I., Etay, J., Fecht, H.J., Giuranno, D., Novakovic, R., Passerone, A., Ricci, E., Schmidt-Hohagen, F., Seetharaman, S., Wunderlich, R.: Surface tension measurements of Al-Ni based alloys from ground-based and parabolic flight experiments: results from the thermolab projects. Microgravity Sci. Technol. XVIII(3/4), 73–76 (2006)
Ayushina, G.D., Levin, E.S., Gel’d, P.V.: The density and surface energy of liquid alloys of aluminium with cobalt and nickel. Russ. J. Phys. Chem. 43(11), 1548–1551 (1969)
Basaran, O.A.: Nonlinear oscillations of viscous liquid drops. J. Fluid Mech. 241, 169–198 (1992)
Bashforth, F., Adams, J.: An Attempt to Test the Theories of Capillary Action. Cambridge University Press, Cambridge (1883)
Bhatia, A.B., Hargrowe, W.H.: Concentration fluctuations and thermodynamic properties of some compound forming binary molten systems. Phys. Rev. B. 10, 3186–3196 (1974)
Brillo, J.: Thermophysical Properties of Multicomponent Liquid Alloys. deGruyter Oldenbourg, Berlin (2016)
Brillo, J., Egry, I.: Surface tension of nickel, copper, iron and their binary alloys. J. Mater. Sci. 40, 2213–2216 (2005)
Brillo, J., Kolland, G.: Surface tension of liquid Al-Au binary alloys. J. Mater. Sci. 51, 4888–4901 (2016)
Brillo, J1., Lohöfer, G., Schmid-Hohagen, F., Schneider, S., Egry, I.: Thermophysical property measurements of liquid metals by electromagnetic levitation. Int. J. Mater. Prod. Tec. 26, 247–273 (2006a)
Brillo, J2., Egry, I., Ho, I.: Density and thermal expansion of liquid Ag-Cu and Ag-Au alloys. Int. J. Thermophys. 27, 494–506 (2006b)
Brillo, J3., Bytchkov, A., Egry, I., Hennet, L., Mathiak, G., Pozdnyakova, I., Price, D.L., Thiaudiere, D., Zanghi, D.; Local structure in liquid binary Al-Cu and Al-Ni alloys. J. Non-Cryst. Solids 352, 4008–4012 (2006c)
Busse, F.H.: Oscillations of a rotating liquid drop. J. Fluid Mech. 142, 1–8 (1984)
Chandrasekhar, S.: Hydrodynamic and Hydromagnetic Stability. Dover Publications, New York (1981)
Chrifi-Alaoui, F.Z., Nassik, M., Mahdouk, K., Gachon, J.C.: Enthalpies of formation of the Al-Ni intermetallic compounds. J. Alloy. Compd. 364, 121–126 (2004)
Cormier, J.: Ni- and Co-based superalloys and their coatings. Metals. 8(1055), 1–3 (2018)
Costa, C., Delsante, S., Borzone, G., Zivkovic, D., Novakovic, R.: Thermodynamic and surface properties of liquid Co-Cr-Ni alloys. J. Chem. Thermodyn. 69, 73–84 (2014)
Cummings, D.L., Blackburn, D.A.: Oscillations of magnetically levitated aspherical droplets. J. Fluid Mech. 224, 395–416 (1991)
De, S., Zhang, J., Luque, R., Yan, N.: Ni-based bimetallic heterogeneous catalysts for energy and environmental applications. Energy Environ. Sci. 9, 3314–3347 (2016)
Defay, R.: Thermodynamique de la Tension Superficielle. Gauthier-Villars, Paris (1971)
Duan, S.-C., Guo, H.-J.: Determination of viscosity and surface tension of liquid Ni-Al-Ti system using the evaluated thermodynamic properties by AMCT. J. Mater. Sci. 55, 11071–11085 (2020)
Dupin, N., Ansara, I., Sundman, B.: Thermodynamic re-assessment of the ternary system Al-Cr-Ni. Calphad. 25(2), 279–298 (2001)
Egry, I.: Surface tension measurements of liquid metals by the oscillating drop technique. J. Mater. Sci. 26, 2997–3003 (1991)
Egry, I., Giffard, H., Schneider, S.: The oscillating drop technique revisited. Meas. Sci. Technol. 16, 426–431 (2005)
Egry, I., Brillo, J., Holland-Moritz, D., Plevachuk, Y.: The surface tension of liquid aluminium-based alloys. Mater. Sci. Eng. A. 495, 14–18 (2008)
Egry, I1., Brooks, R., Holland-Moritz, D., Novakovic, R., Matsushita, T., Plevachuk, Yu., Ricci, E., Seetharaman, S., Sklyarchuk, V., Wunderlich, R., Thermophysical properties of liquid Al-Ni alloys, High Temp.-High Press. 38(4), 343–351 (2010a)
Egry, I2., Ricci, E., Novakovic, R., Ozawa, S.: Surface tension of liquid metals and alloys-recent developments. Adv. Colloid. Interface Sci. 159, 198–212 (2010b)
Egry, I3., Holland-Moritz D., Novakovic R., Ricci E., Wunderlich R., Sobczak N.: Thermophysical properties of liquid AlTi-based alloys. Int. J. Thermophys. 31, 949–965 (2010c)
Eremenko, V.N., Nizhenko, V.I., Naidich, Y.V.: Izv. Akad. Nauk SSSR. Metallurgiya i Topivo. 3, 150–154 (1961) (in Russian)
Fecht, H.J.: The thermoLab project: high-precision thermophysical property data of liquid metals for modelling of industrial solidification processes. High Temp. Mater. Proc. Spec. Issue. 27(6), 385–388 (2008)
Fecht, H.-J., Wunderlich, R.K.: Fundamentals of liquid processing in low earth orbit: from thermophysical properties to microstructure formation in metallic alloys. JOM. 69(8), 1261–1268 (2017)
Fecht, H.-J., Schneider, S., Wunderlich, R.K., Battezzati, L., Papandrea, C., Palumbo, M., Egry, I., Mills, K., Quested, P., Brooks, R., Giuranno, D., Novakovic, R., Passerone, A., Ricci, E., Seetharaman, S., Aune, R., Vinet, B., Garandet, J.-P.: Measurement of thermophysical properties of liquid metallic alloys in a ground- and microgravity based research program. The thermolab project. Metallurgia Italiana. 97(3), 47–53 (2005)
Ferreira, I.L., Garcia, A.: The application of numerical and analytical approaches for the determination of thermophysical properties of Al-Si-Cu-Mg alloys. Contin. Mech. Thermodyn. 32, 1231–1244 (2020)
Fowler, R.H., Guggenheim, E.A.: Statistical Thermodynamics. Cambridge University Press, Cambridge (1960)
Furrer, D., Fecht, H.: Ni-based superalloys for turbine discs. JOM. 51(1), 14–17 (1999)
Giuranno, D., Tuissi, A., Novakovic, R., Ricci, E.: Surface tension and density of Al-Ni alloys. J. Chem. Eng. Data. 55(9), 3024–3028 (2010)
Giuranno, D., Amore, S., Novakovic, R., Ricci, E.: Surface tension and density of RENE N5 and RENE 90 Ni-based superalloys. J. Mater. Sci. 50, 3763–3771 (2015)
Guggenheim, E.A.: Mixtures, p. 271. Oxford University Press, London (1952)
Iida, T., Guthrie, R.I.L.: The Physical Properties of Liquid Metals. Clarendon Press, Oxford (1993)
IMPRESS-Intermetallic Materials Processing in Relation to Earth and Space Solidification. Integrated Project, NMP3-CT-2004-500635, Final Activity Report. 2004–2009 October 31 2009
Jarvis, D.J., Voss, D.: IMPRESS integrated project-an overview paper. Mater. Sci. Eng. A. 413–414, 583–591 (2005)
Johnson, G.R., Palmer, L.D.: Quad-cell mass spectrometry: thermodynamic properties of liquid aluminium-nickel alloys. High Temp. High Press. 12(3), 261–266 (1980)
Keller, T., Lindwall, G., Ghosh, S., Ma, L., Lane, B.M., Zhang, F., Kattner, U.R., Lass, E.A., Heigel, J.C., Idell, Y., Williams, M.E., Allen, A.J., Guyer, J.E., Levine, L.E.: Application of finite element, phase-field, and CALPHAD-based methods to additive manufacturing of Ni-based superalloys. Acta Mater. 139(15), 244–253 (2017)
Kobatake, H., Brillo, J., Schmitz, J., Pichon, P.-Y.: Surface tension of binary Al-Si liquid alloys. J. Mater. Sci. 50, 3351–3360 (2015)
Korozs, J., Kaptay, G.: Derivation of the Butler equation from the requirement of the minimum Gibbs energy of a solution phase, taking into account its surface area. Colloids Surf. A Physicochem. Eng. Asp. 533, 296–301 (2017)
Kozakevitch, P., Urbain, G.: Mém. Sci. Rev. Metall. 58, 401, p. 517, p. 931 (1961)
Lee, J.-J., Sommer, F.: Determination of partial enthalpies of mixing of aluminum-rich alloy melts by solution calorimetry. Z. Metallkd. 76(11), 750–754 (1985)
Levin, E.S., Ayushina, G.D.: Density and surface properties of liquid Al-alloys with chromium, iron, cobalt and nickel. Izv. Ural. Polytechn. Inst. 231, 93–96 (1974) (in Russian)
Lohöfer, G.: Viscosity measurement by the “oscillating drop method”: the case of strongly damped oscillations. Int. J. Thermophys. 41, 30 (2020)
Lohöfer, G., Neuhaus, P., Egry, I.: TEMPUS – a facility for measuring thermophysical properties of undercooled liquid metals. High. Temp. High. Press. 23, 333–342 (1991)
Mashayek, F., Ashgriz, N.: Nonlinear oscillations of drops with internal circulation. Phys. Fluids. 10, 1071–1082 (1998)
Maze, C., Burnet, G.: A non-linear regression method for calculating surface tension and contact angle from the shape of a sessile drop. Surf. Sci. 13(2), 451–470 (1969)
Maze, C., Burnet, G.: Modification of a non-linear regression technique used to calculate surface tension from sessile drops. Surf. Sci. 24, 335–342 (1971)
Mills, K.C., Su, Y.C.: Review of surface tension data for metallic elements and alloys: part 1-pure metals. Int. Mater. Rev. 51(6), 329–351 (2006)
Mohr, M1., Wunderlich, R.K., Koch, S., Galenko, P.K., Gangopadhyay, A.K., Kelton, K.F., Jiang, J.Z., Fecht, H.-J.: Surface tension and viscosity of Cu50Zr50 measured by the oscillating drop technique on board the international space station. Microgravity Sci. Technol. 31, 177–184 (2019a)
Mohr, M2., Wunderlich, R., Dong, Y., Furrer, D., Fecht, H.-J.: Thermophysical properties of advanced Ni-based superalloys in the liquid state measured on board the international space station, Adv. Eng. Mater. 22 1901228, 1–10 (2019b)
Molina, J.M., Voytovych, R., Louis, E., Eustathopoulos, N.: The surface tension of liquid aluminium in high vacuum: the role of surface condition. Int. J. Adh. Adhes. 27, 394–401 (2007)
Naidich, Y.V.: The wettability of solids by liquid metals. In: Cadenhead, D.A., Danielli, J.F. (eds.) Progress in Surface and Membrane Science, pp. 353–484. Academic Press, New York (1981)
Nandwana, P., Elliott, A.M., Siddel, D., Merriman, A., Peter, W.H., Babu, S.S.: Powder bed binder jet 3D printing of Inconel 718: densification, microstructural evolution and challenges. Curr. Opin. Solid State Mater. Sci. 21(4), 207–218 (2017)
Nash, P., Kleppa, O.: Composition dependence of the enthalpies of formation of NiAl. J. Alloy. Compd. 321, 228–231 (2001)
Novakovic, R., Tanaka, T.: Bulk and surface properties of Al-Co and Co-Ni liquid alloys. Physica B. Condens. Matter. 371, 223–231 (2006)
Novakovic, R., Zivkovic, D.: Thermodynamics and surface properties of liquid Ga-X (X = Sn, Zn) alloys. J. Mater. Sci. 40, 2251–2257 (2005)
Novakovic, R., Ricci, E., Gnecco, F., Giuranno, D., Borzone, G.: Surface properties of Au-Sn liquid alloys. Surf. Sci. 599(1–3), 230–247 (2005)
Nowak, R., Lanata, T., Sobczak, N., Ricci, E., Giuranno, D., Novakovic, R., Holland-Moritz, D., Egry, I.: Surface tension of γ-TiAl-based alloys. J. Mater. Sci. 45, 1993–2001 (2010)
Padday, F.: Surface and Colloid Science. Wiley-Interscience, New York (1969)
Park, S.-J., Seo, S.-M., Yoo, Y.-S., Jeong, H.-W., Jang, H.J.: Effects of Al and Ta on the high temperature oxidation of Ni-based superalloys. Corros. Sci. 90, 305–312 (2015)
Pollock, T.M., Tin, S.: Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties. J. Propuls. Power. 22(2), 361–374 (2006)
Quested, P.N., Brooks, R.F., Chapman, L., Morrell, R., Youssef, Y., Mills, K.C.: Measurement and estimation of thermophysical properties of nickel based superalloys. Mater. Sci. Technol. 25, 154–162 (2009)
Rayleigh, L.: On the capillary phenomena of jets. Proc. Royal. Soc. 29, 71–97 (1879)
Reid, W.H.: The oscillation of a viscous liquid drop. Q. Appl. Math. 18, 86–89 (1960)
Ricci, E., Giuranno, D., Novakovic, R., Matsushita, T., Seetharaman, S., Brooks, R., Chapman, L., Quested, P.: Density, surface tension, and viscosity of CMSX-4 superalloy. Int. J. Thermophys. 28(4), 1304–1321 (2007)
Rösler, J., Näth, O., Jäger, S., Schmitz, F., Mukherji, D.: Fabrication of nanoporous Ni-based superalloy membranes. Acta Mater. 53, 1397–1406 (2005)
Sandakov, V.M., Esin, Y.O., Geld, P.V.: Enthalpies of formation of molten nickel-aluminum alloys at 1650°C. Zh. Fiz. Chim. 45, 1798 (1971) (in Russian)
Singh, R.N., March, N.H.: Liquid and vapour species. In: Westbrook, J.H., Fleischer, R.L. (eds.) Intermetallic Compounds, Principles and Practice, vol. 1, pp. 661–686. Wiley, Chichester (1995)
Steeb, S., Falch, S., Lamparter, P.: Struktur und thermisches Verhalten rasch abgeschreckter Legierungen. Z. Metallkd. 75(8), 599–613 (1984) (in German)
Sudavtsova, V.S., Shuvalov, A.V., Sharkina, N.O.: Thermodynamic properties of liquid binary Al-Cr (Ni) alloys. Rasplavy. 4, 97–99 (1990)
Thermolab Final Report. ESA MAP Contract Number AO-99-022. 2003
Thermolab Final Report. ESA MAP AO-99-022. 2006
Thermolab Report. ESA MAP AO-99-022. September 2007
Tsamopoulos, J.A., Brown, R.A.: Nonlinear oscillations of inviscid drops and bubbles. J. Fluid Mech. 127, 519–537 (1983)
Wang, Y., Liu, Z.-K., Chen, L.-Q.: Thermodynamic properties of Al, Ni, NiAl, and Ni3Al from first-principles calculations. Acta Mater. 52, 2665–2671 (2004)
Wang, J.C., Osawa, M., Yokokawa, T., Harada, H., Enomoto, M.: Modeling the microstructural evolution of Ni-base superalloys by phase field method combined with CALPHAD and CVM. Comput. Mater. Sci. 39(4), 871–879 (2007)
Weber, J.H., Khalfalla, Y.E., Benyounis K.Y.: Nickel-based superalloys: alloying methods and thermomechanical processing. In: BT – Reference Module in Materials Science and Materials Engineering. Elsevier BV, (Amsterdam) Web 2016. doi: https://doi.org/10.1016/B978-0-12-803581-8.03383-X)
Werkovits, A., Leitner, T., Pottlacher, G.R.: Surface tension of liquid nickel: re-evaluated and revised data. High Temp.- High Press. 49, 107–124 (2020)
Wunderlich, R.K., Fecht, H.-J.: Surface tension and viscosity of NiAl catalytic precursor alloys from microgravity experiments. Int. J. Mat. Res. 102(9), 1164–1173 (2011)
Wunderlich, R.K., Fecht, H.-J., Lohöfer, G.: Surface tension and viscosity of the Ni-based superalloys LEK94 and CMSX-10 measured by the oscillating drop method on board a parabolic flight. Metall. Mater. Trans. B Process Metall. Mater. Process. Sci. 48, 237–246 (2017)
Wunderlich, R.K., Hecht, U., Hediger, F., Fecht, H.-J.: Surface tension, viscosity, and selected thermophysical properties of Ti48Al48Nb2Cr2, Ti46Al46Nb8, and Ti46Al46Ta8 from microgravity experiments. Adv. Eng. Mater. 20(1–9), 1800346 (2018)
Xiao, X., Hyers, R.W., Wunderlich, R.K., Fecht, H.-J., Matson, D.M.: Deformation induced frequency shifts of oscillating droplets during molten metal surface tension measurement. Appl. Phys. Lett. 113, 011903 (2018)
Zeifert, B., Salmones Blasquez, J., Cabanas Moreno, J.G., Caldero, H.A.: Raney-nickel catalysts produced by mechanical alloying. Rev. Adv. Mater. Sci. 18, 632–638 (2008)