Study on thermal performance improvement technology of latent heat thermal energy storage for building heating

Li, 2018, Optimal design of PCM thermal storage tank and its application for winter available open-air swimming pool, Appl Energy, 209, 224, 10.1016/j.apenergy.2017.10.095 Agyenim, 2010, The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation, Energy Build, 42, 1552, 10.1016/j.enbuild.2010.03.027 Park, 2020, A numerical study on the effect of the number and arrangement of tubes on the melting performance of phase change material in a multi-tube latent thermal energy storage system, J Storage Mater, 32, 101780 Ahmadi, 2018, Phase change in spiral coil heat storage systems, Sustainable Cities Soc, 38, 145, 10.1016/j.scs.2017.12.026 Deng, 2019, Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube, Energy Build, 183, 161, 10.1016/j.enbuild.2018.11.018 Pahamli, 2018, Inner pipe downward movement effect on melting of PCM in a double pipe heat exchanger, Appl Math Comput, 316, 30 Zheng, 2018, Eccentricity optimization of a horizontal shell-and-tube latent-heat thermal energy storage unit based on melting and melting-solidifying performance, Appl Energy, 220, 447, 10.1016/j.apenergy.2018.03.126 Kumar, 2021, Performance study of a novel funnel shaped shell and tube latent heat thermal energy storage system, Renewable Energy, 165, 731, 10.1016/j.renene.2020.11.023 Deng, 2019, Evaluation and optimization of thermal performance for a finned double tube latent heat thermal energy storage, Int J Heat Mass Transf, 130, 532, 10.1016/j.ijheatmasstransfer.2018.10.126 Tian, 2021, A dynamic analytical model to predict and parametrically analyze charging and discharging process of tube-in-tank PCM systems, Thermal Sci Eng Prog, 22, 100866, 10.1016/j.tsep.2021.100866 Duan, 2020, Thermal performance of structured packed bed with encapsulated phase change materials, Int J Heat Mass Transf, 158, 120066, 10.1016/j.ijheatmasstransfer.2020.120066 Raul, 2018, Modelling and experimental study of latent heat thermal energy storage with encapsulated PCMs for solar thermal applications, Appl Therm Eng, 143, 415, 10.1016/j.applthermaleng.2018.07.123 Shamsi, 2017, Performance evaluation and optimization of encapsulated cascade PCM thermal storage, J Storage Mater, 11, 64 Cheng, 2016, Thermal performance analysis of a packed bed cold storage unit using composite PCM capsules for high temperature solar cooling application, Appl Therm Eng, 100, 247, 10.1016/j.applthermaleng.2016.02.036 Veerakumar, 2016, Phase change material based cold thermal energy storage: Materials, techniques and applications – A review, Int J Refrig, 67, 271, 10.1016/j.ijrefrig.2015.12.005 Li, 2020, Investigation on the energy performance of using air-source heat pump to charge PCM storage tank, J Storage Mater, 28, 101270 Li, 2020, A multi-objective optimal design method for thermal energy storage systems with PCM: a case study for outdoor swimming pool heating application, J Storage Mater, 29, 101371 Khan, 2019, Thermodynamic performance of a novel shell-and-tube heat exchanger incorporating paraffin as thermal storage solution for domestic and commercial applications, Appl Therm Eng, 160, 114007, 10.1016/j.applthermaleng.2019.114007 Youssef, 2018, CFD modelling development and experimental validation of a phase change material (PCM) heat exchanger with spiral-wired tubes, Energy Convers Manage, 157, 498, 10.1016/j.enconman.2017.12.036 Mayilvelnathan, 2020, Experimental investigation on thermal behavior of graphene dispersed erythritol PCM in a shell and helical tube latent energy storage system, Int J Therm Sci, 155, 106446, 10.1016/j.ijthermalsci.2020.106446 Fornarelli, 2016, CFD analysis of melting process in a shell-and-tube latent heat storage for concentrated solar power plants, Appl Energy, 164, 711, 10.1016/j.apenergy.2015.11.106 Tehrani, 2016, Design and feasibility of high temperature shell and tube latent heat thermal energy storage system for solar thermal power plants, Renewable Energy, 96, 120, 10.1016/j.renene.2016.04.036 A review of phase change material and performance enhancement method for latent heat storage system - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S1364032118303666 (accessed January 18, 2022). Investigation of heat transfer of a building wall in the presence of phase change material (PCM) - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S2666123320300088 (accessed January 18, 2022). Liang, 2021, Experimental and numerical investigations of latent thermal energy storage using combined flat micro-heat pipe array–metal foam configuration: Simultaneous charging and discharging, Renewable Energy, 171, 416, 10.1016/j.renene.2021.02.022 Guo, 2021, Effect of fin-metal foam structure on thermal energy storage: An experimental study, Renewable Energy, 172, 57, 10.1016/j.renene.2021.03.018 Guo, 2022, Compression effect of metal foam on melting phase change in a shell-and-tube unit, Appl Therm Eng, 206, 118124, 10.1016/j.applthermaleng.2022.118124 Enhancing thermal conductivity of paraffin wax 53–57 °C using expanded graphite - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S0927024819303551 (accessed January 18, 2022). A newly designed paraffin@VO2 phase change material with the combination of high latent heat and large thermal conductivity - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S0021979719312111 (accessed January 18, 2022). Fang, 2019, Thermal properties enhancement and application of a novel sodium acetate trihydrate-formamide/expanded graphite shape-stabilized composite phase change material for electric radiant floor heating, Appl Therm Eng, 150, 1177, 10.1016/j.applthermaleng.2019.01.069 Xie, 2019, Improving the heat storage/release rate and photo-thermal conversion performance of an organic PCM/expanded graphite composite block, Sol Energy Mater Sol Cells, 201, 110081, 10.1016/j.solmat.2019.110081 Experimental investigations of a latent heat energy storage unit using finned tubes - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S1359431115014830 (accessed January 18, 2022). Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S0306261919317891 (accessed January 18, 2022). Xu, 2020, Optimization on the melting performance of triplex-layer PCMs in a horizontal finned shell and tube thermal energy storage unit, Appl Therm Eng, 176, 115409, 10.1016/j.applthermaleng.2020.115409 Mahdi, 2018, Accelerated melting of PCM in energy storage systems via novel configuration of fins in the triplex-tube heat exchanger, Int J Heat Mass Transf, 124, 663, 10.1016/j.ijheatmasstransfer.2018.03.095 Numerical analysis of latent heat thermal energy storage using encapsulated phase change material for solar thermal power plant - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S096014811630310X (accessed January 18, 2022). Consolidated microcapsules with double alginate shell containing paraffin for latent heat storage - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S0927024815003682 (accessed January 18, 2022). Praveen, 2019, Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink, Appl Therm Eng, 156, 237, 10.1016/j.applthermaleng.2019.04.072 Li, 2019, Preparation and characterization of PMMA/TiO2 hybrid shell microencapsulated PCMs for thermal energy storage, Energy, 167, 1031, 10.1016/j.energy.2018.11.038 Zhao, 2022, Review of analytical studies of melting rate enhancement with fin and/or foam inserts, Appl Therm Eng, 207, 118154, 10.1016/j.applthermaleng.2022.118154 Raul, 2020, Transient performance analysis of concentrating solar thermal power plant with finned latent heat thermal energy storage, Renewable Energy, 145, 1957, 10.1016/j.renene.2019.07.117 Yang, 2020, Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit, Appl Energy, 279, 115772, 10.1016/j.apenergy.2020.115772 Yang, 2017, Thermal performance of a shell-and-tube latent heat thermal energy storage unit: Role of annular fins, Appl Energy, 202, 558, 10.1016/j.apenergy.2017.05.007 Ge, 2022, Evaluation of different melting performance enhancement structures in a shell-and-tube latent heat thermal energy storage system, Renewable Energy, 187, 829, 10.1016/j.renene.2022.01.097 Guo, 2022, Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube, Renewable Energy, 183, 406, 10.1016/j.renene.2021.11.007 Guo, 2022, Thermal assessment on solid-liquid energy storage tube packed with non-uniform angled fins, Sol Energy Mater Sol Cells, 236, 111526, 10.1016/j.solmat.2021.111526 Parametric investigations to enhance thermal performance of paraffin through a novel geometrical configuration of shell and tube latent thermal storage system - ScienceDirect n.d. https://www.sciencedirect.com/science/article/pii/S0196890416308123 (accessed January 18, 2022). Yang, 2022, Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit, Sol Energy Mater Sol Cells, 236, 111527, 10.1016/j.solmat.2021.111527 Diao, 2019, Numerical investigation of the thermal performance enhancement of latent heat thermal energy storage using longitudinal rectangular fins and flat micro-heat pipe arrays, Appl Energy, 233–234, 894, 10.1016/j.apenergy.2018.10.024 Gürtürk, 2020, A new approach in the design of heat transfer fin for melting and solidification of PCM, Int J Heat Mass Transf, 153, 119671, 10.1016/j.ijheatmasstransfer.2020.119671 Aly, 2019, Enhancement of solidification rate of latent heat thermal energy storage using corrugated fins, J Storage Mater, 24, 100785 Nóbrega, 2020, Solidification around axial finned tube submersed in PCM: Modeling and experiments, J Storage Mater, 29, 101438 Zhao, 2015, Numerical analysis of a shell-and-tube latent heat storage unit with fins for air-conditioning application, Appl Energy, 138, 381, 10.1016/j.apenergy.2014.10.051 Rathod, 2015, Thermal performance enhancement of shell and tube Latent Heat Storage Unit using longitudinal fins, Appl Therm Eng, 75, 1084, 10.1016/j.applthermaleng.2014.10.074 Sciacovelli, 2015, Maximization of performance of a PCM latent heat storage system with innovative fins, Appl Energy, 137, 707, 10.1016/j.apenergy.2014.07.015 Jmal, 2015, Numerical study of PCM solidification in a finned tube thermal storage including natural convection, Appl Therm Eng, 84, 320, 10.1016/j.applthermaleng.2015.03.065 Zhao, 2020, Numerical study of melting performance enhancement for PCM in an annular enclosure with internal-external fins and metal foams, Int J Heat Mass Transf, 150, 119348, 10.1016/j.ijheatmasstransfer.2020.119348 Sharifi, 2011, Enhancement of PCM melting in enclosures with horizontally-finned internal surfaces, Int J Heat Mass Transf, 54, 4182, 10.1016/j.ijheatmasstransfer.2011.05.027 Lu, 2022, Performance optimization and experimental analysis of a novel low-temperature latent heat thermal energy storage device, Energy, 239, 122496, 10.1016/j.energy.2021.122496