Study on the mechanical behaviors of grey iron mould by simulation and experiment

Sharma, 1984, Chemistry, microstructure and tensile strength of ingot mould, Ironmaking Steelmaking, 11, 214 Fash, 1982, Fatigue behavior and mean effects in grey cast iron, Int J Fatigue, 4, 137, 10.1016/0142-1123(82)90040-8 Downing, 1982, Stress/strain simulation model for grey cast iron, Int J Fatigue, 4, 143, 10.1016/0142-1123(82)90041-X Weinacht, 1987, Fatigue damage accumulation in grey cast iron, Int J Fatigue, 9, 79, 10.1016/0142-1123(87)90048-X Haenny, 1983, Strain mechanisms in grey cast iron, Eng Fract Mech, 18, 377, 10.1016/0013-7944(83)90147-9 Haenny, 1984, The role of the matrix graphite interaction in the tensile behavior of grey cast iron, Eng Fract Mech, 19, 113, 10.1016/0013-7944(84)90073-0 Haenny, 1985, Crack growth resistance of a gray cast iron, Eng Fract Mech, 21, 529, 10.1016/S0013-7944(85)80045-X Sjogren, 2004, Comparison of mechanical properties in flake graphite and compacted graphite cast irons for piston rings, Int J Cast Met Res, 17, 65, 10.1179/136404604225017474 Sjogren, 2004, Modelling the effect of graphite morphology on the modulus of elasticity in cast irons, Int J Cast Met Res, 17, 271, 10.1179/136404604225022694 Collini, 2008, Microstructure and mechanical properties of pearlitic gray cast iron, Mater Sci Eng A, 488, 529, 10.1016/j.msea.2007.11.070 Guo, 1989, Thermal fatigue and fracture mechanism analysis of grey cast iron, Acta Metall Sin, 2, 194 Vadiraj, 2009, Effect of misch metal inoculation on microstructure, mechanical and wear properties of hypoeutectic gray cast irons, Mater Des, 30, 4488, 10.1016/j.matdes.2009.05.032 Vadiraj, 2010, Studies on mechanical and wear properties of alloyed hypereutectic gray cast irons in the as-cast pearlitic and austempered conditions, Mater Des, 31, 951, 10.1016/j.matdes.2009.07.030 Vadiraj, 2011, Mechanical and wear behavior of quenched and tempered alloyed hypereutectic gray cast iron, Mater Des, 32, 2438, 10.1016/j.matdes.2010.11.052 Balachandran, 2011, Mechanical and wear behavior of alloyed gray cast iron in the quenched and tempered and austempered conditions, Mater Des, 32, 4042, 10.1016/j.matdes.2011.03.054 Hejazi, 2009, Effect of copper insert on the microstructure of gray iron produced via lost foam casting, Mater Des, 30, 1085, 10.1016/j.matdes.2008.06.032 Taşgin, 2009, Investigation of effects of boron additives and heat treatment on carbides and phase transition of highly alloyed duplex cast iron, Mater Des, 30, 3174, 10.1016/j.matdes.2008.11.015 Ruiz, 1996, Effect of surface laser treatment on the microstructure and wear behaviour of grey iron, Mater Des, 17, 267, 10.1016/S0261-3069(97)00020-4 Yao, 1996, Crack analysis and optimum design of the large flat ingot mould, J Iron Steel Res Int, 8, 22 ProCAST 2011. ProCAST user’s manual. ESI Group. The Virtual Try-Out Space; 2010. Lan P, Li Y, Zhang J, et al. Effect of mould taper and wall thickness on steel ingots soundness by 3-D solidification simulation. In: Materials processing fundamentals, TMS 2012, Florida, 2012: 71–78. Koric, 2008, Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws, J Mater Process Technol, 197, 408, 10.1016/j.jmatprotec.2007.06.060 Heeres, 2002, A comparison between the Perzyna viscoplastic model and the consistency viscoplastic model, Eur J Mech A – Solids, 21, 1, 10.1016/S0997-7538(01)01188-3 Simo, 1998 Sheng, 1982, Temperature measurement of 4.5t ingot mold of vermicular graphite cast iron during teeming, Iron Steel, 17, 61 Yu, 1993, Analysis of the failure behavior of cast iron ingot mould, Angang Technol, 11, 31 GB/T228.1-2010, 2007 GB/T228.1-2010, 2011 GB/T 4339-2008, 2009 Roehrig, 1978, Thermal fatigue of gray and ductile irons, AFS Trans, 86, 75 Drapkin, 1971, Elastic and relaxation characteristics grey cast iron during thermal cycling, Met Sci Heat Treat, 13, 953, 10.1007/BF00650555 Tkalcec, 2004, Internal friction in martensitic, ferritic and bainitic carbon steel; cold work effects, Mater Sci Eng A, 370, 213, 10.1016/j.msea.2003.04.004 Li, 2010, The mechanism investigation of deep cryogenic treatment on high alloy martensitic steel by low frequency internal friction, Cryogenics, 50, 433, 10.1016/j.cryogenics.2010.04.003