Nghiên cứu về việc cải thiện tính chất sol-gel thông qua công nghệ hợp chất nhị phân cho việc đánh bóng khô các vật liệu cứng và giòn

Wang Y, Guangheng D, Zhao J et al. (2019) Study on key factors influencing the surface generation in rotary ultrasonic grinding for hard and brittle materials. J Manuf Process 38:549–555. https://doi.org/10.1016/j.jmapro.2019.01.046

Guo L, Zhang X, Chen S, Hui J (2019) An experimental study on the precision abrasive machining process of hard and brittle materials with ultraviolet-resin bond diamond abrasive tools. Materials 12:1–11. https://doi.org/10.3390/ma12010125

Guo B, Zhao Q (2019) Ultra-precision machining of hard and brittle materials with coarse-grained grinding wheels. Springer Tracts Mech Eng 201–236. https://doi.org/10.1007/978-981-13-3335-4_8

Huang S, Lu J, Chen S et al. (2019) Study on the surface quality of marble tiles polished with Sol-Gel derived pads. J Sol-Gel Sci Technol 91:485–495. https://doi.org/10.1007/s10971-019-05041-z

Hashimoto F, Yamaguchi H, Krajnik P et al. (2016) Abrasive fine-finishing technology. CIRP Ann Manuf Technol 65:597–620. https://doi.org/10.1016/j.cirp.2016.06.003

lu J, li Y, Xu X (2015) The effects of abrasive yielding on the polishing of SiC wafers using a semi-fixed flexible pad. Proc Inst Mech Eng, Part B: J Eng Manuf 229:170–177. https://doi.org/10.1177/0954405414563556

Yuan J, Zhang F, Dai Y et al. (2010) Development research of science and technologies in ultra-precision machining field. Jixie Gongcheng Xuebao/J Mech Eng 46:161–177. https://doi.org/10.3901/JME.2010.15.161

Nakamura H, Yan J, Syoji K, Wakamatsu Y (2003) Development of a polishing disc containing granulated fine abrasives. Key Eng Mater 238–239:257–262. https://doi.org/10.4028/www.scientific.net/kem.238-239.257

Yamamoto Y, Maeda H, Shibutani H et al. (2004) A study on constant-pressure grinding with EPD pellets. Key Eng Mater 257–258:135–138. https://doi.org/10.4028/www.scientific.net/kem.257-258.135

Shimada K, Akagami Y, Fujita T et al. (2002) Characteristics of magnetic compound fluid (MCF) in a rotating rheometer. J Magn Magn Mater 252:235–237. https://doi.org/10.1016/S0304-8853(02)00646-7

Deng QF, Yuan JL, Lü BH et al. (2012) Influences of semi-fixed abrasive tool characteristics on tool wear and material removal in processing. Nami Jishu yu Jingmi Gongcheng/Nanotechnol Precis Eng 10:89–94

Xu Y, Lu J, Xu X et al. (2018) Study on high efficient sapphire wafer processing by coupling SG-mechanical polishing and GLA-CMP. Int J Mach Tools Manuf 130–131:12–19. https://doi.org/10.1016/j.ijmachtools.2018.03.002

Lu J, Xu Y, Zhang Y, Xu X (2017) The effects of SiO2 coating on diamond abrasives in sol-gel tool for SiC substrate polishing. Diam Relat Mater 76:123–131. https://doi.org/10.1016/j.diamond.2017.05.003

Xu X, Liu J, Yu Y, Lu J (2013) Fabrication and application of gel-bonded abrasive tools for grinding and polishing tools. Jixie Gongcheng Xuebao/J Mech Eng 49:156–162. https://doi.org/10.3901/JME.2013.19.156

Park C, Kim H, Lee S, Jeong H (2015) The influence of abrasive size on high-pressure chemical mechanical polishing of sapphire wafer. Int J Precis Eng Manuf - Green Technol 2:157–162. https://doi.org/10.1007/s40684-015-0020-0

Lee H (2017) Environmental impact of concentration of slurry components in thick copper CMP. Int J Precis Eng Manuf - Green Technol 4:13–18. https://doi.org/10.1007/s40684-017-0002-5

Lu J, Xu Y, Zhang D, Xu X (2017) The synthesis of the core/shell structured diamond/akageneite hybrid particles with enhanced polishing performance. Materials 10:673–680. https://doi.org/10.3390/ma10060673

Lu J, Luo Q, Xu X et al. (2019) Removal mechanism of 4H- and 6H-SiC substrates (0001 and 0001) in mechanical planarization machining. Proc Inst Mech Eng, Part B: J Eng Manuf 233:69–76. https://doi.org/10.1177/0954405417718595

Xu Y, Lu J, Xu X (2019) Pollution-free approaches for highly efficient sapphire substrate processing by mechanical chemical polishing. Catalysts 9:594. https://doi.org/10.3390/catal9070594

Gorbanenko O (2017) A dry polishing technique for the petrographic examination of mudrocks. Int J Coal Geol 180:122–126. https://doi.org/10.1016/j.coal.2017.03.013

Deng H, Takiguchi T, Ueda M et al. (2011) Damage-Free Dry Polishing of 4H-SiC Combined with Atmospheric-Pressure Water Vapor Plasma Oxidation. Jpn J Appl Phys 50:08JG05. https://doi.org/10.1143/JJAP.50.08JG05

Li Y, Wu Y, Zhou L, Fujimoto M (2014) Vibration-assisted dry polishing of fused silica using a fixed-abrasive polisher. Int J Mach Tools Manuf 77:93–102. https://doi.org/10.1016/j.ijmachtools.2013.10.005

Vanin FM, Sobral PJA, Menegalli FC et al. (2005) Effects of plasticizers and their concentrations on thermal and functional properties of gelatin-based films. Food Hydrocoll 19:899–907. https://doi.org/10.1016/j.foodhyd.2004.12.003

Olivas GI, Barbosa-Cánovas GV (2008) Alginate-calcium films: Water vapor permeability and mechanical properties as affected by plasticizer and relative humidity. LWT - Food Sci Technol 41:359–366. https://doi.org/10.1016/j.lwt.2007.02.015

Li B, Kennedy JF, Jiang QG, Xie BJ (2006) Quick dissolvable, edible and heatsealable blend films based on konjac glucomannan - Gelatin. Food Res Int 39:544–549. https://doi.org/10.1016/j.foodres.2005.10.015

Zheng H, Zhang Q, Jiang K et al. (1996) Critical behavior of viscosity for alginate solutions near the gelation threshold induced by cupric ions. J Chem Phys 105:7746–7752. https://doi.org/10.1063/1.472557

Silva MA, da, Bierhalz ACK, Kieckbusch TG (2009) Alginate and pectin composite films crosslinked with Ca2+ ions: Effect of the plasticizer concentration. Carbohydr Polym 77:736–742. https://doi.org/10.1016/j.carbpol.2009.02.014

Braccini I, Pérez S (2001) Molecular basis of Ca2+-induced gelation in alginates and pectins: The egg-box model revisited. Biomacromolecules 2:1089–1096. https://doi.org/10.1021/bm010008g

Sirviö JA, Kolehmainen A, Liimatainen H et al. (2014) Biocomposite cellulose-alginate films: Promising packaging materials. Food Chem 151:343–351. https://doi.org/10.1016/j.foodchem.2013.11.037

Rezvanain M, Ahmad N, Mohd Amin MCI, Ng SF (2017) Optimization, characterization, and in vitro assessment of alginate-pectin ionic cross-linked hydrogel film for wound dressing applications. Int J Biol Macromolecules 97:131–140. https://doi.org/10.1016/j.ijbiomac.2016.12.079

Xiao Q, Lim LT, Tong Q (2012) Properties of pullulan-based blend films as affected by alginate content and relative humidity. Carbohydr Polym 87:227–234. https://doi.org/10.1016/j.carbpol.2011.07.040

Müller CMO, Laurindo JB, Yamashita F (2009) Effect of cellulose fibers on the crystallinity and mechanical properties of starch-based films at different relative humidity values. Carbohydr Polym 77:293–299. https://doi.org/10.1016/j.carbpol.2008.12.030

Harding SE, Smith IH, Lawson CJ et al. (2011) Studies on macromolecular interactions in ternary mixtures of konjac glucomannan, xanthan gum and sodium alginate. Carbohydr Polym 83:329–338. https://doi.org/10.1016/j.carbpol.2010.06.035

Kumar M, Dosanjh HS, Singh H (2018) Removal of lead and copper metal ions in single and binary systems using biopolymer modified spinel ferrite. J Environ Chem Eng 6:6194–6206. https://doi.org/10.1016/j.jece.2018.09.054

Dewangan T, Tiwari A, Bajpai AK (2011) Removal of chromium(VI) ions by adsorption onto binary biopolymeric beads of sodium alginate and carboxymethyl cellulose. J Dispers Sci Technol 32:1075–1082. https://doi.org/10.1080/01932691003659403

Gopalakannan V, Viswanathan N (2016) One pot synthesis of metal ion anchored alginate-gelatin binary biocomposite for efficient Cr(VI) removal. Int J Biol Macromolecules 83:450–459. https://doi.org/10.1016/j.ijbiomac.2015.10.010

Kumar A, Rao KM, Han SS (2017) Development of sodium alginate-xanthan gum based nanocomposite scaffolds reinforced with cellulose nanocrystals and halloysite nanotubes. Polym Test 63:214–225. https://doi.org/10.1016/j.polymertesting.2017.08.030

Jiang S, Yu B, Zhou K et al. (2014) Sol-gel synthesis and enhanced properties of a novel transparent PMMA based organic-inorganic hybrid containing phosphorus, nitrogen and silicon. J Sol-Gel Sci Technol 69:418–428. https://doi.org/10.1007/s10971-013-3236-x

Zahedi M, Ray AK (2010) Optical absorption in solution processed thin films of calcia-alumina binary compounds. J Sol-Gel Sci Technol 55:317–321. https://doi.org/10.1007/s10971-010-2255-0

Shivayogimath A, Thomsen JD, Mackenzie DMA et al. (2019) A universal approach for the synthesis of two-dimensional binary compounds. Nat Commun 10:2957. https://doi.org/10.1038/s41467-019-11075-2