Study on the electric discharge behaviour of a single contact in EV motor bearings

Darabi, 2011, Aggregated impact of plug-in hybrid electric vehicles on electricity demand profile, IEEE Trans Sustain Energy, 2, 501, 10.1109/TSTE.2011.2158123 Kalaiselvi, 2015, Bearing currents and shaft voltage reduction in dual-inverter-fed open-end winding induction motor with reduced CMV PWM methods, IEEE Trans Ind Electron, 62, 144, 10.1109/TIE.2014.2336614 Robles, 2019, Mitigation of common mode voltage issues in electric vehicle drive systems by means of an alternative AC-decoupling power converter topology, Energies, 12, 3349, 10.3390/en12173349 He, 2020, Electrical bearing failures in electric vehicles, Friction, 8, 4, 10.1007/s40544-019-0356-5 Boyanton, 2002, Bearing fluting [motors], IEEE Ind Appl Mag, 8, 53, 10.1109/MIA.2002.1028391 Liu, 2014, The prevalent motor bearing premature failures due to the high frequency electric current passage, Eng Fail Anal, 45, 118, 10.1016/j.engfailanal.2014.06.021 Ost, 2005, Failure analysis of the deep groove ball bearings of an electric motor, Eng Fail Anal, 12, 772, 10.1016/j.engfailanal.2004.12.003 Yu, 2011, Fatigue failure analysis of a grease-lubricated roller bearing from an electric motor, J Fail Anal Preven, 11, 158, 10.1007/s11668-010-9422-z Romanenko, 2016, Effects of electrostatic discharges on bearing grease dielectric strength and composition, IEEE Trans Ind Appl, 52, 4835, 10.1109/TIA.2016.2596239 Muetze A. Bearing currents in inverter-fed AC-motors. PhD thesis, TU Darmstadt, 2003. Muetze, 2007, Calculation of circulating bearing currents in machines of inverter-based drive systems, IEEE Trans Ind Electron, 54, 932, 10.1109/TIE.2007.892001 Tischmacher H. Systemanalysen zur elektrischen Belastung von Wälzlagern bei umrichtergespeisten Elektromotoren. PhD thesis, Gottfried Wilhelm Leibniz Universität Hannover, 2017. Gemeinder, 2021, Application guide bearing currents, Tech Univ Darmstadt Graf, 2023, Breakdown voltages in thrust bearings-behavior and measurement, Tribology Trans, 1 Schiferl, 2004, Bearing current remediation options, IEEE Ind Appl Mag, 10, 40, 10.1109/MIA.2004.1311162 Chmelik, 2007, Devices for prevention of bearings devaluation by electric current, 316 Willwerth, 2013, Electrical bearing damage-A lurking problem in inverter-driven traction motors, 1 SKF. Bearing insulation prevents electrical current damage. SKF Evolution Mag. 2018 Apr. 27. [Online]. Available: https://evolution.skf.com/bearing-insulation-prevents-electrical-current-damage/. White M. Vapor deposition bearing coating. US patent, US10539178B2, 2020. Horchheimer R., Schnabl G. Coating method for bearing ring. US patent, US11137030B2, 2021. SKF. Solution for traction motors. 2008. [Online]. Available: http://www.skf.com/binary/49–57716/6815EN.pdf. Oliver, 2017, Ceramic bearings for electric motors: eliminating damage with new materials, IEEE Ind Appl Mag, 23, 14, 10.1109/MIAS.2016.2600692 Kahlman, 2001, Hybrid bearings for electrical machinery, SKF Evol Mag Suzumura, 2016, Prevention of electrical pitting on rolling bearings by electrically conductive grease, Q Rep RTRI, 57, 42, 10.2219/rtriqr.57.1_42 Zhang, 2015, Study of conductive and friction properties of grease containing carbon black additive, AMR, 1120, 586, 10.4028/www.scientific.net/AMR.1120-1121.586 Fan, 2014, Tribological properties of conductive lubricating greases, Friction, 2, 343, 10.1007/s40544-014-0062-2 Gonda, 2019, The influence of lubricant conductivity on bearing currents in the case of rolling bearing greases, Lubricants, 7, 108, 10.3390/lubricants7120108 Tischmacher, 2012, Investigations on bearing currents in converter-fed electrical motors, 1764 Campo, 2008, 141 Schneider, 2022, Method for in situ film thickness measurement of ball bearings under combined loading using capacitance measurements, Tribology Int, 171, 10.1016/j.triboint.2022.107524 Hamrock, 1977, Isothermal Elastohydrodynamic lubrication of point contacts: part III—fully flooded results. ASME, 99, 264 Galvin, 1963, The effect of pressure and temperature on some properties of fluids of importance in elastohydrodynamic lubrication, Proc Inst Mech Eng, Conf Proc, 178, 283