Study on modified poplar wood powder/polylactic acid high toughness green 3D printing composites

International Journal of Biological Macromolecules - Tập 228 - Trang 311-322 - 2023
Mingru Kong1,2,3, Zheng Qin4, Ping Zhang5, Guangqiang Xie5, Hao Wang5, Jun Wang3, Fulong Guan3, Weizhen Yang3, Zhaowen Qiu1
1Northeast Forestry University, Harbin 150040, China
2Key Laboratory of Bio-based Material Science & Technology (Northeast Forestry University), Ministry of Education,Harbin 150040, China
3Hongqi Hospital of Mudanjiang Medical College, Mudan River, 157011, China
4Market Authority of Mudanjiang, Mudan River, 157011, China
5Key Laboratory of Forest Sustainable Management and Environmental Microbial Engineering (Northeast Forestry University), Harbin 150040, China

Tài liệu tham khảo

Ehrmann, 2021, 3D printing of shape memory polymers, J. Appl. Polym. Sci., 138, 10.1002/app.50847 Blyweert, 2021, 3D printing of carbon-based materials: a review, Carbon, 183, 449, 10.1016/j.carbon.2021.07.036 Wang, 2022, Preparation and mechanism of lightweight wood fiber/poly(lactic acid) composites, Int. J. Biol. Macromol., 217, 792, 10.1016/j.ijbiomac.2022.07.101 Sun, 2022, Modified cellulose nanocrystals enhanced the compatibility between PLA and PBAT to prepare a multifunctional composite film, J. Polym. Environ., 30, 3139, 10.1007/s10924-022-02422-4 Qi, 2022, Comparison of properties of poly(lactic acid) composites prepared from different components of corn straw fiber, Int. J. Mol. Sci., 23, 10.3390/ijms23126746 Zhou, 2022, Performance of composite materials by wood fiber/polydopamine/silver modified PLA and the antibacterial property, J. Mater. Res. Technol., 18, 428, 10.1016/j.jmrt.2022.02.113 Chen, 2022, Preparation of glycidyl methacrylate grafted starch adhesive to apply in high-performance and environment-friendly plywood, Int. J. Biol. Macromol., 194, 954, 10.1016/j.ijbiomac.2021.11.152 Cao, 2022, Rapid quantification of intracellular polyhydroxyalkanoates via fluorescence techniques: a critical review, Bioresour. Technol., 350, 10.1016/j.biortech.2022.126906 Cai, 2021, Development levels of pediatric palliative care teams and the extent of palliative care understanding and implementation among pediatric oncologists in China, Pediatr. Investig., 5, 265, 10.1002/ped4.12291 Piri, 2021, The fabrication of a novel film based on polycaprolactone incorporated with chitosan and rutin: potential as an antibacterial carrier for rainbow trout packaging, Food Sci. Biotechnol., 30, 683, 10.1007/s10068-021-00898-9 Liu, 2020, Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing, Turk. J. Chem., 44, 1430, 10.3906/kim-2006-55 Xue, 2022, Triblock copolymer compatibilizers for enhancing the mechanical properties of a renewable bio-polymer, Polymers, 14, 10.3390/polym14132734 Tao, 2021, Waste office paper filled polylactic acid composite filaments for 3D printing, Compos. Part B, 221, 10.1016/j.compositesb.2021.108998 Boonpavanitchakul, 2022, Influence of sericin-g-PLA as an organic nucleating agent for preparing biodegradable blend films, J. Appl. Polym. Sci., 139, 10.1002/app.52389 Liu, 2019, 3D printed PCL/SrHA scaffold for enhanced bone regeneration, Chem. Eng. J., 362, 269, 10.1016/j.cej.2019.01.015 Knez, 2021, Effects of selected printing parameters on the fire properties of 3D-printed neat polylactic acid (PLA) and Wood/PLA composites, J. Renew. Mater., 9, 1883, 10.32604/jrm.2021.016128 Trinh, 2021, Thin-structured and compostable wood fiber-polymer biocomposites: fabrication and performance evaluation, Compos. A: Appl. Sci. Manuf., 140, 10.1016/j.compositesa.2020.106150 Yang, 2016, Bleached extruder chemi-mechanical pulp fiber-PLA composites: comparison of mechanical, thermal, and rheological properties with those of wood flour-PLA bio-composites, J. Appl. Polym. Sci., 133, 10.1002/app.44241 Yu, 2017, Incorporation of graphitic nano-filler and poly(lactic acid) in fused deposition modeling, J. Appl. Polym. Sci., 134, 10.1002/app.44703 Yan, 2020, Study on the properties of PLA/PBAT composite modified by nanohydroxyapatite, J. Mater. Res. Technol., 9, 11895, 10.1016/j.jmrt.2020.08.062 Feng, 2020, Performance comparison of four kinds of Straw/PLA/PBAT wood plastic composites, Bioresources, 15, 2596, 10.15376/biores.15.2.2596-2604 Hao, 2018, Effect of in situ reactive interfacial compatibilization on structure and properties of polylactide/sisal fiber biocomposites, Polym. Compos., 39, E174, 10.1002/pc.24484 Hao, 2017, In situ reactive interfacial compatibilization of polylactide/sisal fiber biocomposites via melt-blending with an epoxy-functionalized terpolymer elastomer, RSC Adv., 7, 32399, 10.1039/C7RA03513F Pradhan, 2010, Compostability and biodegradation study of PLA-wheat straw and PLA-soy straw based green composites in simulated composting bioreactor, Bioresour. Technol., 101, 8489, 10.1016/j.biortech.2010.06.053 Zhao, 2017, Preparation and selective laser sintering of bamboo flour/copolyester composite and post-processing, J. Thermoplast. Compos. Mater., 30, 1045, 10.1177/0892705715616854 Liu, 2020, Favorable thermoresponsive shape memory effects of 3D printed Poly(Lactic Acid)/Poly(epsilon-Caprolactone) blends fabricated by fused deposition modeling, Macromol. Mater. Eng., 305, 10.1002/mame.202000295 Zhang, 2017, Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling, Mater. Des., 130, 59, 10.1016/j.matdes.2017.05.040 Wang, 2017, Temperature-dependent mechanical properties of wood-adhesive bondline evaluated by nanoindentation, J. Adhes., 93, 640, 10.1080/00218464.2015.1130629 Le Digabel, 2004, Properties of thermoplastic composites based on wheat-straw lignocellulosic fillers, J. Appl. Polym. Sci., 93, 428, 10.1002/app.20426 Das, 2021, A review on wood powders in 3D printing: processes, properties and potential applications, J. Mater. Res. Technol., 15, 241, 10.1016/j.jmrt.2021.07.110 Triwulandari, 2019, Effect of lignin on mechanical, biodegradability, morphology, and thermal properties of polypropylene/polylactic acid/lignin biocomposite, Plast., Rubber Compos., 48, 82, 10.1080/14658011.2018.1562746 Ferreira, 2021, The role of graphene on thermally induced shape memory properties of poly(lactic acid) extruded composites, J. Therm. Anal. Calorim., 143, 3107, 10.1007/s10973-020-09402-7 Ren, 2020, Interfacial adhesion of polylactic acid on cellulose surface: a molecular dynamics study, ACS Appl. Mater. Interfaces, 12, 3236, 10.1021/acsami.9b20101 Guo, 2019, Preparation and characterization of 3D printed PLA-based conductive composites using carbonaceous fillers by masterbatch melting method, Polymers, 11, 10.3390/polym11101589 Nelson, 2020, Quantification of synthetic polyesters from biodegradable mulch films in soils, Environ. Sci. Technol., 54, 266, 10.1021/acs.est.9b05863 Liu, 2022, Preparation and properties of PBAT/PLA composites modified by PVA and cellulose nanocrystals, J. Appl. Polym. Sci., 139, 10.1002/app.51474 Kariz, 2017, Adhesive bonding of 3D-printed ABS parts and wood, J. Adhes. Sci. Technol., 31, 1683, 10.1080/01694243.2016.1268414 Wu, 2022, Development of PA6/GO microspheres with good processability for SLS 3D printing, Polym. Eng. Sci., 62, 1700, 10.1002/pen.25957 Niu, 2021, Surface coating and interfacial properties of hot-waxed wood using modified polyethylene wax, Prog. Org. Coat., 150 Chaiwutthinan, 2019, Composites of poly(lactic acid)/poly(butylene adipate-co-terephthalate) blend with wood fiber and wollastonite: physical properties, morphology, and biodegradability, J. Appl. Polym. Sci., 136, 10.1002/app.47543 Singh, 2021, Physical, mechanical, and thermal properties of Dalbergia sissoo wood waste-filled poly(lactic acid) composites, Polym. Compos., 42, 4380, 10.1002/pc.26155 Perez-Fonseca, 2021, Influence of the blending method over the thermal and mechanical properties of biodegradable polylactic acid/polyhydroxybutyrate blends and their wood biocomposites, Polym. Adv. Technol., 32, 3483, 10.1002/pat.5359 Maminski, 2021, Discharge plasma treatment as an efficient tool for improved poly(lactide) adhesive-wood interactions, Materials, 14, 10.3390/ma14133672 Franca, 2019, Tailoring PBAT/PLA/Babassu films for suitability of agriculture mulch application, J. Nat. Fibers, 16, 933, 10.1080/15440478.2018.1441092 Nunes, 2021, PBAT/PLA/cellulose nanocrystals biocomposites compatibilized with polyethylene grafted maleic anhydride (PE-g-MA), J. Appl. Polym. Sci., 138, 10.1002/app.51342 Chaidas, 2022, An investigation of PLA/W parts quality fabricated by FFF, Mater. Manuf. Process., 37, 582, 10.1080/10426914.2021.1944193 Ma, 2020, Preparation of isocyanate microcapsules as a high-performance adhesive for PLA/WF, Constr. Build. Mater., 260, 10.1016/j.conbuildmat.2020.120483 Li, 2018, Preparation of plasticized poly (lactic acid) and its influence on the properties of composite materials, PLoS ONE, 13, 10.1371/journal.pone.0193520 Han, 2021, Effect of high-molecular-weight maleic anhydride-grafted polylactic acid compatibilizer on the properties of polylactic acid-based wood polymer composites, J. Korea Acad. Ind. Cooperation Soc., 22, 275