Study on microstructure and mechanical behavior relationship for laser-welded dissimilar joint of P92 martensitic and 304L austenitic steel

Gianfrancesco, 2017 Kern, 2002, The European efforts in material development for 650 ° C USC power plants — cost522, ISIJ Int., 42, 1515, 10.2355/isijinternational.42.1515 Akram, 2017, Creep behavior of dissimilar metal weld joints between P91 and AISI 304, Mater. Sci. Eng., 688, 396, 10.1016/j.msea.2017.02.026 Abe, 2015, Research and development of heat-resistant materials for advanced USC power plants with steam temperatures of 700 °C and above, Engineering, 1, 211, 10.15302/J-ENG-2015031 Kaybyshev, 2010, New martensitic steels for fossil power plant: creep resistance, Phys. Met. Metallogr., 109, 186, 10.1134/S0031918X10020110 Kumar, 2022, Autogenous laser - welded dissimilar joint of ferritic/martensitic P92 steel and Inconel 617 alloy : mechanism , microstructure , and mechanical properties, Arch. Civ. Mech. Eng., 6 Ennis, 2003, Recent advances in creep-resistant steels for power plant applications, Sadhana - Acad. Proc. Eng. Sci., 28, 709 Vaillant, 2008, T/P23, 24, 911 and 92: new grades for advanced coal-fired power plants-Properties and experience, Int. J. Pres. Ves. Pip., 85, 38, 10.1016/j.ijpvp.2007.06.011 Landowski, 2020, Autogenous fiber laser welding of 316L austenitic and 2304 lean duplex stainless steels, Materials, 13, 1, 10.3390/ma13132930 Ennis, 1997, Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant, Acta Mater., 45, 4901, 10.1016/S1359-6454(97)00176-6 Sawada, 2001, Creep behavior and stability of MX precipitates at high temperature in 9Cr-0.5Mo-1.8W-VNb steel, Mater. Sci. Eng., 319, 784, 10.1016/S0921-5093(01)00973-X Spigarelli, 2002, Analysis of the creep behaviour of modified P91 (9Cr–1Mo–NbV) welds, Mater. Des., 23, 547, 10.1016/S0261-3069(02)00026-2 Hu, 2004, An investigation of the embrittlement in X20CrMoV12.1 power plant steel after long-term service exposure at elevated temperature, Mater. Sci. Eng., 383, 224, 10.1016/j.msea.2004.05.080 Pandey, 2020, The characterization of soft fine‐grained heat‐affected zones in P91 weldments under creep exposure conditions, Steel Res. Int., 91, 1900342, 10.1002/srin.201900342 Pandey, 2016, Evolution of phases in P91 steel in various heat treatment conditions and their effect on microstructure stability and mechanical properties, Mater. Sci. Eng., 664, 58, 10.1016/j.msea.2016.03.132 Rogalski, 2020, Mechanical and microstructural characterization of tig welded dissimilar joints between 304l austenitic stainless steel and incoloy 800ht nickel alloy, Metals, 10, 559, 10.3390/met10050559 Sirohi, 2020, Characterization of structure-property relationship of martensitic P91 and high alloy ferritic austenitic F69 steel, Int. J. Pres. Ves. Pip., 188, 104179, 10.1016/j.ijpvp.2020.104179 Sirohi, 2021, Study on evaluation of through-thickness residual stresses and microstructure-mechanical property relation for dissimilar welded joint of modified 9Cr–1Mo and SS304H steel, Int. J. Pres. Ves. Pip., 194, 104557, 10.1016/j.ijpvp.2021.104557 Świerczyńska, 2012, The effect of welding conditions on diffusible hydrogen content in deposited metal, Solid State Phenom., 183, 193, 10.4028/www.scientific.net/SSP.183.193 Tomków, 2019, Advantages of the application of the temper bead welding technique during wet welding, Materials, 16 Świerczyńska, 2017, Diffusible hydrogen management in underwater wet self-shielded flux cored arc welding, Int. J. Hydrogen Energy, 42, 24532, 10.1016/j.ijhydene.2017.07.225 Tomków, 2019, Effect of the welding environment and storage time of electrodes on the diffusible hydrogen content in deposited metal, Rev. Metal. (Madr.), 55 Kumar, 2021, Role of dissimilar Ni-based ERNiCrMo-3 filler on the microstructure, mechanical properties and weld induced residual stresses of the ferritic/martensitic P91 steel welds joint, Int. J. Pres. Ves. Pip., 193, 104443, 10.1016/j.ijpvp.2021.104443 Pavan, 2015, Development and evaluation of SUS 304H - IN 617 welds for advanced ultra supercritical boiler applications, Mater. Sci. Eng., 642, 32, 10.1016/j.msea.2015.06.065 Shah Hosseini, 2016, Microstructural and weldability analysis of Inconel 617/AISI 310 stainless steel dissimilar welds, Int. J. Pres. Ves. Pip., 144, 18, 10.1016/j.ijpvp.2016.05.004 Cao, 2011, Microstructure and mechanical properties of dissimilar materials joints between T92 martensitic and S304H austenitic steels, Mater. Des., 32, 2763, 10.1016/j.matdes.2011.01.008 Pandey, 2020, Mechanical and metallurgical characterization of dissimilar P92/SS304 L welded joints under varying heat treatment regimes, Metall. Mater. Trans., 51, 2126, 10.1007/s11661-020-05660-0 Kulkarni, 2019, Dissimilar metal welding of P91 steel-AISI 316L SS with Incoloy 800 and Inconel 600 interlayers by using activated TIG welding process and its effect on the microstructure and mechanical properties, J. Mater. Process. Technol., 274, 116280, 10.1016/j.jmatprotec.2019.116280 Zhao, 2014, Numerical simulation on the effect of welding parameters on welding residual stresses in T92/S30432 dissimilar welded pipe, Adv. Eng. Software, 68, 70, 10.1016/j.advengsoft.2013.12.004 Vidyarthy, 2017, Study of microstructure and mechanical property relationships of A-TIG welded P91–316L dissimilar steel joint, Mater. Sci. Eng., 695, 249, 10.1016/j.msea.2017.04.038 Deng, 2015, Aging treatment on the microstructures and mechanical properties of new groove T92/super 304H dissimilar steel joints, High Temp. Mater. Process., 34, 425, 10.1515/htmp-2014-0067 Shin, 2018, Transition of creep damage region in dissimilar welds between Inconel 740H Ni-based superalloy and P92 ferritic/martensitic steel, Mater. Char., 139, 144, 10.1016/j.matchar.2018.02.039 Laha, 2012, A comparison of creep rupture strength of ferritic/austenitic dissimilar weld joints of different grades of Cr-Mo ferritic steels, Metall. Mater. Trans., 43, 1174, 10.1007/s11661-011-0957-8 Shuo, 2018, Post-weld heat treatment and groove angles affect the mechanical properties of T92/super 304H dissimilar steel weld joints, High Temp. Mater. Process., 37, 649, 10.1515/htmp-2016-0261 Liang, 2018, Influence of Aging treatment on the microstructure and mechanical properties of T92/Super 304H dissimilar metal welds, Mater. A. T. High. Temp., 35, 327, 10.1080/09603409.2017.1334857 Thakare, 2019, An assessment for mechanical and microstructure behavior of dissimilar material welded joint between nuclear grade martensitic P91 and austenitic SS304 L steel, J. Manuf. Process., 48, 249, 10.1016/j.jmapro.2019.10.002 Adhithan, 2021, Study on effect of grain refinement of P92 steel base plate on mechanical and microstructural features of the welded joint, Int. J. Pres. Ves. Pip., 104426, 10.1016/j.ijpvp.2021.104426 Seo, 2020, Effect of post-weld heat treatment on the microstructure and hardness of P92 steel in IN740H/P92 dissimilar weld joints, Mater. Char., 160, 110083, 10.1016/j.matchar.2019.110083 Dak, 2020, A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application, J. Manuf. Process., 58, 377, 10.1016/j.jmapro.2020.08.019 Shah Hosseini, 2011, Characterization of microstructures and mechanical properties of Inconel 617/310 stainless steel dissimilar welds, Mater. Char., 62, 425, 10.1016/j.matchar.2011.02.003 Savage, 1976, Study of weld interface phenomena in a low alloy steel, Weld. J., 55 Dak, 2021, Experimental investigation on microstructure, mechanical properties, and residual stresses of dissimilar welded joint of martensitic P92 and AISI 304L austenitic stainless steel, Int. J. Pres. Ves. Pip., 194, 104536, 10.1016/j.ijpvp.2021.104536 Lippold, 2015, vol. 9781118230 Sharma, 2021, Study on Flux assisted-Tungsten inert gas welding of bimetallic P92 martensitic steel-304H austenitic stainless steel using SiO2–TiO2 binary flux, Int. J. Pres. Ves. Pip., 192, 104423, 10.1016/j.ijpvp.2021.104423 Sharma, 2019, A-TIG welding of dissimilar P92 steel and 304H austenitic stainless steel: mechanisms, microstructure and mechanical properties, J. Manuf. Process., 44, 166, 10.1016/j.jmapro.2019.06.003 Sirohi, 2021, Role of the Ni-based filler (IN625) and heat-treatment on the mechanical performance of the GTA welded dissimilar joint of P91 and SS304H steel, J. Manuf. Process., 65, 174, 10.1016/j.jmapro.2021.03.029 Sharma, 2019, Comparative study of activated flux-GTAW and multipass-GTAW dissimilar P92 steel-304H ASS joints, Mater. Manuf. Process., 34, 1195, 10.1080/10426914.2019.1605175