Study on mechanical and wear properties of Al 7075/Al2O3/graphite hybrid composites

Yılmaz, 2001, Abrasive wear of Al2O3-reinforced aluminium-based MMCs, Compos Sci Technol, 61, 2381, 10.1016/S0266-3538(01)00131-2

Hassan, 2009, Wear behavior of Al–Mg–Cu-based composites containing SiC particles, Tribol Int, 42, 1230, 10.1016/j.triboint.2009.04.030

Gui, 2001, Dry sliding wear behavior of plasmasprayed aluminum hybrid composite coatings, Metall Mater Trans A, 32A, 2383, 10.1007/s11661-001-0212-9

Tang, 2008, Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites, Wear, 264, 555, 10.1016/j.wear.2007.04.006

Zhan, 2003, Graphite and SiC hybrid particles reinforced copper composite and its tribological characteristic, J Mater Sci Lett, 22, 1087, 10.1023/A:1024986824717

Leng, 2009, Effect of graphite particle reinforcement on dry sliding wear of SiC/Gr/Al composites, Rare Met Mater Eng, 38, 1894, 10.1016/S1875-5372(10)60059-8

Ramesh, 2001, Friction and wear behavior of Ni–P coated Si3N4 reinforced Al6061 composites, Tribol Int, 43, 623, 10.1016/j.triboint.2009.09.011

Tjong, 2006, Mechanical and thermal expansion behavior of hipped aluminum-TiB2 composites, Mater Chem Phys, 97, 91, 10.1016/j.matchemphys.2005.07.075

William, 1998, Commercial processing of metal matrix composites, Mater Sci Eng A, 244, 75, 10.1016/S0921-5093(97)00828-9

Akhlaghi, 2004, Effects of casting temperature on the microstructure and wear resistance of compocast A356/SiCp composites: a comparison between SS and SL routes, J Mater Process Technol, 155–156, 1874, 10.1016/j.jmatprotec.2004.04.328

Rosso, 2006, Ceramic and metal matrix composites: routes and properties, J Mater Process Technol, 175, 364, 10.1016/j.jmatprotec.2005.04.038

Seyed Reihani, 2006, Processing of squeeze cast Al6061-30vol.% Sic composites and their characterization, Mater Des, 27, 216, 10.1016/j.matdes.2004.10.016

Estrada-Guel, 2009, Graphite nanoparticle dispersion in 7075 aluminum alloy by means of mechanical alloying, J Alloys Compd, 483, 173, 10.1016/j.jallcom.2008.07.190

Jha, 1989, Dry sliding wear of sintered 6061 aluminium alloy–graphite particle composites, Tribol Int, 22, 321, 10.1016/0301-679X(89)90147-3

Kerti, 2008, Microstructural variations in cast B4C-reinforced aluminium matrix composites (AMCs), Mater Lett, 62, 1215, 10.1016/j.matlet.2007.08.015

Kimura, 1993, Recent trends in tribology in Japan, J Eurotrib, 931, 1

Raghumatham, 1991, Fabrication, properties and structure of a high temperature light alloy composite, J Mater Sci, 26, 985, 10.1007/BF00576776

Shibata, 1994, Tribological application on MMCs for reducing engine weight, Tribol Int, 27, 39, 10.1016/0301-679X(94)90061-2

Chellman, 1993, Aerospace applications of advanced aluminium alloys, J Key Eng Mater, 77–78, 49

Banerji, 1982, Abrasive wear of cast aluminium alloy–zircon particle composites, Wear, 82, 141, 10.1016/0043-1648(82)90288-5

Prasad, 1986, Mechanisms of material removal during low stress and high stress abrasion of aluminium alloy–zircon particle composites, Mater Sci Eng, 80, 213, 10.1016/0025-5416(86)90199-0

Kok, 2007, Wear resistance of aluminum alloy and its composites reinforced by Al2O3 particles, J Mater Process Technol, 183, 301, 10.1016/j.jmatprotec.2006.10.021

Surappa, 1982, Wear and abrasion of cast Al-alumina particle composites, Wear, 77, 295, 10.1016/0043-1648(82)90055-2

Straffelini, 1997, Influence of matrix hardness on the dry sliding behavior of 20vol.% Al2O3-particulate-reinforced 6061 Al metal matrix composite, Wear, 211, 192, 10.1016/S0043-1648(97)00119-1

Yu, 1997, Temperature dependence of sliding wear behavior in SiC whisker or SiC particulate reinforced 6061 aluminum alloy composite, Wear, 213, 21, 10.1016/S0043-1648(97)00207-X

Liang, 1995, Effect of particle size on wear behaviour of SiC particulate-reinforced aluminum alloy composites, J Mater Sci Lett, 1, 114, 10.1007/BF00456563

Reda, 2008, Improvements in mechanical and stress corrosion cracking properties in Al-alloy 7075 via retrogression and reaging, Mater Sci Eng A, 485, 468, 10.1016/j.msea.2007.08.025

Clark, 2005, On the correlation of mechanical and physical properties of 7075-T6 Al alloy, Eng Fail Anal, 12, 520, 10.1016/j.engfailanal.2004.09.005

Kim, 2001, The study on characteristics of heat treatment of the direct squeeze cast 7075 wrought Al alloy, Mater Sci Eng A, 304–306, 721, 10.1016/S0921-5093(00)01594-X

Doel, 1996, Tensile properties of particulate-reinforced metal matrix composites, Composites Part A-Appl S, 27, 655, 10.1016/1359-835X(96)00040-1

Komai, 1993, Tensile and fatigue fracture behavior and water-environment effects in a SiC-whisker/7075-aluminum composite, Compos Sci Technol, 46, 59, 10.1016/0266-3538(93)90081-Q

Liu, 1993, Tribological characteristics of aluminum-50 Vol Pct graphite composite, Metall Trans A, 24 A, 151, 10.1007/BF02669612

Rohatgi, 1992, Tribological properties of metal matrix–graphite particle composites, Int Mater Rev, 3, 129, 10.1179/imr.1992.37.1.129

Liu, 1992, Friction and wear of aluminium–graphite composites: the smearing process of graphite during sliding, Wear, 159, 201, 10.1016/0043-1648(92)90303-P

Rohatgi, 1991, Tribological behavior and surface analysis of tribo deformed Al Alloy-50 Pet graphite particle composites, Metall Trans A, 22A, 1435, 10.1007/BF02660675

Mustafa, 1994, Casting of graphite Al–Si base composites, Can Metall Quart, 33, 259, 10.1179/000844394795539118

Krishan, 1984, Modification of Al–Si alloy melts containing graphite particle dispersions, Met Technol, 11, 41, 10.1179/030716984803274297

Kumar, 2008, Developing a mathematical model to evaluate wear rate of AA7075/SiCp powder metallurgy composites, Wear, 264, 1026, 10.1016/j.wear.2007.08.006

Rahimian, 2010, Investigation of particle size and amount of alumina on microstructure and mechanical properties of Al matrix composite made by powder metallurgy, Mater Sci Eng A, 527, 1031, 10.1016/j.msea.2009.09.034

Surappa, 1978, Production of aluminium – graphite particle composites using copper coated graphite particles, Met Technol, 5, 358, 10.1179/mt.1978.5.1.358

Son, 2003, Homogeneous dispersion of graphite in a 6061 aluminium alloy by ball milling, Mater Sci Eng A, 348, 163, 10.1016/S0921-5093(02)00749-9

Lin, 1998, A study on process and tribological behaviour of Al alloy/Grp composites, Wear, 217, 167, 10.1016/S0043-1648(98)00192-6

Ted Guo, 2000, Tribological behaviour of self-lubricating aluminium/SiC/graphite hybrid composites synthesized by the semi-solid powder-densification method, Compos Sci Technol, 60, 65, 10.1016/S0266-3538(99)00106-2

Pai, 1978, Production of cast aluminium–graphite particle composites using a pellet method, J Mater Sci, 13, 329, 10.1007/BF00647777

Yen, 1996, Effect of humidity on friction and wear of Al–Si eutectic alloy and A1–Si alloy–graphite composites, Wear, 198, 169, 10.1016/0043-1648(96)06955-4

Jha, 1989, Preparation and properties of 6061 aluminum alloy/graphite composites by PM route, Powder Metall, 32, 309, 10.1179/pom.1989.32.4.309

Ted Guo, 2002, Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites, Mater Sci Eng, 333A, 134, 10.1016/S0921-5093(01)01817-2

Akhlaghi, 2009, Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024–graphite composites produced by in situ powder metallurgy method, Wear, 266, 37, 10.1016/j.wear.2008.05.013

Zhao, 2007, Friction and wear behavior of Ni–graphite composites prepared by electroforming, Mater Des, 28, 1374, 10.1016/j.matdes.2006.01.001

Unlu, 2008, Investigation of tribological and mechanical properties Al2O3-SiC reinforced Al composites manufactured by casting or P/M method, Mater Des, 29, 2002, 10.1016/j.matdes.2008.04.014

Rohatgi, 2010, Tribological performance of A206 aluminum alloy containing silica sand particles, Tribol Int, 43, 455, 10.1016/j.triboint.2009.07.010

Suresha, 2010, Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates, Compos Sci Technol, 70, 1652, 10.1016/j.compscitech.2010.06.013

Basavarajappa, 2006, Dry sliding wear behavior of Al 2219/SiCp-Gr hybrid metal matrix composites, J Mater Eng Perform, 15, 668, 10.1361/105994906X150803

Rao, 2010, Effect of heat treatment on the sliding wear behaviour of aluminium alloy (Al–Zn–Mg) hard particle composite, Tribol Int, 43, 330, 10.1016/j.triboint.2009.06.013

Rao, 2010, Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminium alloy composites, Mater Des, 31, 1200, 10.1016/j.matdes.2009.09.032

Ramesh, 2009, Development and performance analysis of novel cast copper–SiC–Gr hybrid composites, Mater Des, 30, 1957, 10.1016/j.matdes.2008.09.005

Zhan, 2006, The role of graphite particles in the high temperature wear of copper hybrid composites against steel, Mater Des, 27, 79, 10.1016/j.matdes.2004.08.019

TianChi, 2006, The fabrication and wear properties of C/Al and (C/SiC)/Al composites based on wood template, Mater Lett, 60, 2695, 10.1016/j.matlet.2006.01.074

Jun, 2004, Dry sliding friction and wear properties of Al2O3 and carbon short fibres reinforced Al–12Si alloy hybrid composites, Wear, 257, 930, 10.1016/j.wear.2004.05.009

Rao, 2009, Dry sliding wear behaviour of cast high strength aluminium alloy (Al–Zn–Mg) and hard particle composites, Wear, 267, 1688, 10.1016/j.wear.2009.06.034

TedGuo, 2002, Tribological behavior of aluminum/SiC/nickel-coated graphite hybrid composites, Mater Sci Eng A, 333, 134, 10.1016/S0921-5093(01)01817-2

Mahdavi, 2011, Effect of the graphite content on the tribological behavior of Al/Gr and Al/30SiC/Gr composites processed by in situ powder metallurgy (IPM) method, Tribol Lett, 44, 1, 10.1007/s11249-011-9818-2

Rosenberger, 2009, Wear behavior of AA1060 reinforced with alumina under different loads, Wear, 266, 356, 10.1016/j.wear.2008.06.007

Rosenberger, 2005, Wear of aluminium matrix composites under conditions that generate a mechanically mixed layer, Wear, 259, 590, 10.1016/j.wear.2005.02.003

Pathak, 2006, Synthesis and characterisation of aluminium–silicon–silicon carbide composites, Indian J Eng Mater Sci, 13, 238

Mcdanels, 1985, Analysis of stress–starin farcture and ductility behaviour of aluminium matrix composites containing discontinuous silicon carbide reinforcement, Metall Mater Trans A, 16, 1105, 10.1007/BF02811679

Embury, 1985, Plastic flow in dispersion hardened materials, Metall Mater Trans A, 16, 2191, 10.1007/BF02670418

Doel, 1996, Tensile properties of particulate reinforced metal matrix composites, Composites Part A, 27A, 655, 10.1016/1359-835X(96)00040-1

Hamid Abdulhaqq, 2008, The influence of porosity and particle content on dry sliding wear of cast in situ Al(Ti)-Al2O3(TiO2) composite, Wear, 265, 14, 10.1016/j.wear.2007.08.018

Wang, 1992, Formation of magnesium aluminate (spinel) in cast SiC particulate-reinforced Al (A356) metal matrix composites, Metall Mater Trans A, 23, 1423, 10.1007/BF02647325

Veeresh Kumar, 2012, Studies on mechanical and dry sliding wear of Al6061–Si composites, Composites Part B, 43, 1185, 10.1016/j.compositesb.2011.08.046