Study on inlet pressure and Reynolds number in pressure-swirl atomizer with spiral path

de Morais Bertoldi, 2017, Experimental evaluation of pressure-swirl injection system over solid fuel regression rate in hybrid rockets, 661 2014 Lefebvre, 1989 Ranganadha Babu, 1990, Correlations for prediction of discharge rate, core angle and air core diameter of swirl spray atomizers, Int. J. Turbo Jet Engines, 7, 235 Suyari, 1986, Film thickness measurements in a simplex swirl atomizer, J. Propuls. Power, 2, 528, 10.2514/3.22937 Dombrowski, 1972, The atomization of water by swirl spray pressure nozzles, Trans. Inst. Chem. Eng., 50, 259 Baranaev, 1973, Centrifugal injector droplet size over a wide range of dispersant properties, Fluid Dyn., 5, 492, 10.1007/BF01019288 Montazeri, 2007, Improving the droplet prediction model in pressure-swirl injectors based on the study of the dynamics of the spraying phases Milan Maly, 2014 Kamranpey, 2021, Review on Main Equations for Measuring Spray Properties in Centrifugal Injectors, J. Indust. Safety Eng., 8 Khani Aminjan, 2020, Study of pressure swirl atomizer with tangential input at design point and outside of design point, Phys. Fluids, 32, 10.1063/5.0032174 Choi, 2000, Development behavior of vaporizing sprays from a high-pressure swirl injector using exciplex fluorescence method, KSME Int. J., 14, 1143, 10.1007/BF03185068 Davanlou, 2015, Effect of viscosity and surface tension on breakup and coalescence of bicomponent sprays, Chem. Eng. Sci., 131, 243, 10.1016/j.ces.2015.03.057 Zigan, 2012, Reynolds number effects on atomization and cyclic spray fluctuations under gasoline direct injection conditions, 253 Li, 2003, Effect of Reynolds number of molten spray particles on splat formation in plasma spraying, 5 Arachchilage, 2019, Numerical simulation of high-pressure gas atomization of two-phase flow: Effect of gas pressure on droplet size distribution, Adv. Powder Technol., 30, 2726, 10.1016/j.apt.2019.08.019 Chu, 2008, An experimental investigation of swirl atomizer sprays, Heat Mass Transf., 45, 11, 10.1007/s00231-008-0389-1 Dafsari, 2017, Effect of swirl chamber length on the atomization characteristics of a pressure-swirl nozzle, Atomiz. Sprays, 27, 10.1615/AtomizSpr.2017024777 Liu, 2019, Experimental investigations of spray generated by a pressure swirl atomizer, J. Energy Inst., 92, 210, 10.1016/j.joei.2018.01.014 Broniarz-Press, 2016, The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers, Crop Prot., 82, 65, 10.1016/j.cropro.2016.01.005 Laurila, 2019, Analysis of viscous fluid flow in a pressure-swirl atomizer using large-eddy simulation, Int. J. Multiphase Flow, 113, 371, 10.1016/j.ijmultiphaseflow.2018.10.008 Natarajan, 2021, Numerical study of two-phase flow dynamics and atomization in an open-type liquid swirl injector, Int. J. Multiphase Flow, 143, 10.1016/j.ijmultiphaseflow.2021.103702 Yu, 2021, Multiscale simulation of atomization process and droplet particles diffusion of pressure-swirl nozzle, Powder Technol., 379, 127, 10.1016/j.powtec.2020.10.053 Chen, 2022, Multi-objective optimization on flow characteristics of pressure swirl nozzle: A LES-VOF simulation, Int. Commun. Heat Mass Transf., 133, 10.1016/j.icheatmasstransfer.2022.105926 Wang, 2019, Numerical Simulation of Internal Flow and External Atomization in Pressure Swirl Nozzle, J. Phys. Conf. Ser., 1300, 10.1088/1742-6596/1300/1/012082 Liu, 2017, Studies on air core size in a simplex pressure-swirl atomizer, Int. J. Hydrog. Energy, 42, 18649, 10.1016/j.ijhydene.2017.04.188 Rezaei, 2021, A Correlation of aviation fuel temperature effect on mean drop size in pressure swirl spray, Atomiz. Sprays, 31, 10.1615/AtomizSpr.2021034393 Tonini, 2021, Numerical analysis of regime stability of a water mist pressure swirl atomizer, Atomiz. Sprays, 31, 10.1615/AtomizSpr.2021038314 Hamid, 2006 Najafi, 2020, Microscopic and macroscopic atomization characteristics of a pressure-swirl atomizer, injecting a viscous fuel oil, Chin. J. Chem. Eng., 28, 9, 10.1016/j.cjche.2019.04.006 Gad, 2022, Effect of geometric parameters on spray characteristics of air assisted pressure swirl atomizer, Alexandria Eng. J., 61, 5557, 10.1016/j.aej.2021.11.010 Wimmer, 2013, Viscous flow through the swirl chamber of a pressure-swirl atomizer, Int. J. Multiphase Flow, 53, 100, 10.1016/j.ijmultiphaseflow.2013.02.003 Taboada, 2021, Oil droplet breakup during pressure swirl atomization of food emulsions: Influence of atomization pressure and initial oil droplet size, J. Food Process Eng., 44, 10.1111/jfpe.13598 Khani Aminjan, 2021, Study of spiral path angle in pressure-swirl atomizer with spiral path, Arch. Appl. Mech., 91, 33, 10.1007/s00419-020-01803-2 Khani Aminjan, 2021, Study of pressure-swirl atomizer with spiral path at design point and outside of design point, Phys. Fluids, 33, 10.1063/5.0059779 Shafaee, 2014, Reverse analysis of a spiral injector to find geometrical parameters and flow conditions using a GA-based program, Aerosp. Sci. Technol., 39, 137, 10.1016/j.ast.2014.09.008 Hansen, 2002, A computational and experimental study of the internal flow in a scaled pressure-swirl atomizer, Zaragoza, 9, 11 Shi, 2018, Numerical Simulation on Atomizing Performance of Pressure Swirl Nozzles in Ethoxylation Reactors, Int. J. Chem. React. Eng., 16 Nonnenmacher, 2000, Design of hollow cone pressure swirl nozzles to atomize Newtonian fluids, Chem. Eng. Sci., 55, 4339, 10.1016/S0009-2509(00)00043-9 Hassani, 2019, Numerical investigation of the full-cone spray structure and characteristics provided by a jet-swirl atomizer, Proc. Inst. Mech. Eng. Part G: J. Aerospace Eng., 233, 5788, 10.1177/0954410019860320 Nada, 2012, Geometrical characterization and performance optimization of monopropellant thruster injector, Egypt. J. Remote Sens. Space Sci., 15, 161 Lan, 2014, Experimental study on spray characteristics of pressure-swirl nozzles in pressurizer, Ann. Nucl. Energy, 63, 215, 10.1016/j.anucene.2013.07.048 Fan, 2020, Experimental investigations of spray characteristics of a pressure-swirl atomizer, Proc. Inst. Mech. Eng. Part A: J. Power Energy, 234, 643, 10.1177/0957650919875612 Zhang, 2017, Spray characteristics of pressure-swirl nozzles at different nozzle diameters, Appl. Therm. Eng., 121, 984, 10.1016/j.applthermaleng.2017.04.089 Madsen, 2004, Numerical simulation of internal flow in a large-scale pressure-swirl atomizer, 183 Bayvel, 1993 Rizk, 1985, Internal flow characteristics of simplex swirl atomizers, J. Propul. Power, 1, 193, 10.2514/3.22780 Jones, 1982, "Factors affecting the performance of large swirl pressure jet atomizers," Central Electricity Generating Board (CEGB) Ballester, 1994, Discharge coefficient and spray anglemeasurements for small pressure-swirl nozzles, Atomiz. Sprays, 4, 351, 10.1615/AtomizSpr.v4.i3.70 Cousin, 1998, Transient flows in high pressure swirl injectors, SAE Technical Paper No., 980499, 10.4271/980499 Dodge, 1986, Effect of elevated temperature and pressure on sprays from simplex swirl atomizers, J. Eng. Gas Turbines Power, 108, 209, 10.1115/1.3239873 DeCorso, 1957, Effect of ambient and fuel pressure on nozzle spray angle, Trans. ASME, 79, 607 Chen, 1990, Influence of geometric features on the performance of pressure-swirl atomizers, J. Eng. Gas Turbines Power, 112, 579, 10.1115/1.2906208 Rizk, 1987, Prediction of velocity coefficient and spray cone angle for simplex swirl atomizers, Int. J. Turbo. Jet. Eng., 4, 65 Lefebvre, 2017 Moon, 2009, Air flow and pressure inside a pressure swirl spray and their effects on spray development, Exp. Thermal Fluid Sci., 33, 222, 10.1016/j.expthermflusci.2008.08.005 Arcoumanis, 2000, Pressure-swirl atomizers for DISI engines: Further modeling and experiments, SAE Technical Paper No., 2000-01-1044, 10.4271/2000-01-1044 See https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node298.htm for information about VOF Model. Galpin, 2005, A one dimensional model for designing pressure swirl atomizers, SAE Technical Paper No., 2005-01-2101, 10.4271/2005-01-2101 C. A. Chryssakis, D. N. Assanis, J. K. Lee, and K. Nishida, "Fuel spray simulation of high-pressure swirl-injector for DISI engines and comparison with laser diagnostic measurements," SAE Technical Paper No. 2003-01- 0007 (2003). Ren, 1999, Recent developments in simulations of internal flows in high pressure swirl injectors, Oil Gas Sci. Technol., 54, 227, 10.2516/ogst:1999019 Hosseinzadeh, 2020, Effect of SiO2 super-hydrophobic coating and self-rewetting fluid on two phase closed thermosyphon heat transfer characteristics: an experimental and numerical study, J. Mol. Liq., 315, 10.1016/j.molliq.2020.113748 Mikaniki, 2019, Experimental study of a heavy fuel oil atomization by pressure-swirl injector in the application of entrained flow gasifier, Chin. J. Chem. Eng., 27, 765, 10.1016/j.cjche.2018.10.001 Huang, 2004, Simulation of a spray dryer fitted with a rotary disk atomizer using a three-dimensional computional fluid dynamic model, Dry. Technol., 22, 1489, 10.1081/DRT-120038737 Fluent Manual, see www.fluent.com for Discrete Phase Models (2004)". Galbiati, 2016, Numerical simulations of internal flow in an aircraft engine pressure swirl atomizer, J. Propuls. Power, 32, 1433, 10.2514/1.B35944 Rezaeimoghaddam, 2010, Optimization of a high pressure swirl injector by using volume-of-fluid (VOF) method, Vol. 49170, 435 Maly, 2018, Internal flow and air core dynamics in simplex and spillreturn pressure-swirl atomizers, Int. J. Heat Mass Transf., 123, 805, 10.1016/j.ijheatmasstransfer.2018.02.090 Sumer, 2012 Munson, 2013, 271