Study of the yielding of sand under generalized stress conditions using a versatile hollow cylinder torsional apparatus

Baldi, G., Hight, D.W., Thomas, G.E., 1988. A reevaluation of conventional triaxial test methods. In: Advanced Triaxial Testing of Soils and Rock, ASTM STP977, Philadelphia. Connolly, T.M., Kuwano, R., 1999. The measurement of Gmax in a resonant column, bender element, torsional shear apparatus. In: Proceedings Second International Symposium on Pre-failure Deformation Characteristics of Geomaterials, vol. 1, Torino, Italy, pp. 73–80. Drnevich, V.P., 1985. Recent developments in resonant column testing. In: Proceedings Richart Commemorative Lectures, ASTM Specialty Session, Detroit, pp. 79–107. Hight, 1983, The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils, Géotechnique, 33, 355, 10.1680/geot.1983.33.4.355 Lade, 1975, Elastoplastic stress strain theory for cohesionless soil, ASCE Geotechnical Engineering Journal, 101, 1037 Lade, 1976, Stress-path dependent behavior of cohensionless soil, ASCE Geotechnical Engineering Journal, 102, 51 Matsuoka, 1985, Relationship among Tresca, Mises, Mohr–Coulomb and Matsuoka–Nakai failure criteria, Soils and Foundations, 25, 123, 10.3208/sandf1972.25.4_123 Matsuoka, 1990, A constitutive model for soils evaluating principal stress rotation and its application to some deformation problems, Soils and Foundations, 30, 142, 10.3208/sandf1972.30.142 Naughton, P.J., O’Kelly, B.C., 2003. The anisotropy of Leighton Buzzard sand under general stress conditions. In: Proceedings Third International Symposium on Deformation Characteristics of Geomaterials, vol. 1, Lyon, France, pp. 285–291. Naughton, 2007, Stress non-uniformity in a hollow cylinder torsional sand specimen, Geomechanics and Geoengineering, 2, 117, 10.1080/17486020701377124 O’Kelly, B.C., Naughton, P.J., 2003. Development of the University College Dublin hollow cylinder apparatus. In: Proceedings 56th Canadian Geotechnical Conference, Winnipeg, Ontario. O’Kelly, 2005, Development of a new hollow cylinder apparatus for stress path measurements over a wide strain range, ASTM Geotechnical Testing Journal, 28, 345 O’Kelly, 2005, Engineering properties of wet-pluviated hollow cylindrical specimens, ASTM Geotechnical Testing Journal, 28, 570 O’Kelly, 2008, Local measurements of the polar deformation response in a hollow cylinder apparatus, Geomechanics and Geoengineering, 3 O’Kelly B.C., Naughton P.J., 2008b. Measuring shear strain in a hollow cylinder apparatus using electrolevel-inclinometer gages. In: Proceedings Fourth International Symposium on Pre-Failure Deformation Characteristics of Geomaterials, Atlanta, Georgia, USA. O’Kelly B.C.; Naughton P.J., 2008c. Use of proximity transducers for local radial strain measurements in a hollow cylinder apparatus. In: Proceedings Fourth International Symposium on Pre-Failure Deformation Characteristics of Geomaterials, Atlanta, Georgia, USA. Pradel, 1990, Yielding and flow of sand under principal stress axes rotation, Soils and Foundations, 30, 87, 10.3208/sandf1972.30.87 Saada, A.S., Townsend, F.C., 1981. State of the art: laboratory strength testing of soils. In: Laboratory Shear Strength of Soils, ASTM STP740, Philadelphia, pp. 7–77. Sivathayalan, 1998, Truly undrained response of granular soils with no membrane penetration effects, Canadian Geotechnical Journal, 35, 730, 10.1139/t98-048 Tatsuoka, 1974, Yielding of sand in triaxial compression, Soils and Foundations, 14, 63, 10.3208/sandf1972.14.2_63 Tatsuoka, 1983, Closure to Cyclic undrained stress–strain behavior of dense sands by torsional simple shear tests, Soils and Foundations, 23, 142 Tatsuoka, 1986, Failure and deformation of sand in torsional shear, Soils and Foundations, 26, 79, 10.3208/sandf1972.26.4_79 Terzaghi, 1943 Wijewickreme, D., 1990. Behavior of sand under simultaneous increase in stress ratio and rotation of principal stresses. PhD thesis, University of British Colombia, Canada.